P0113 2006 Ford Fusion Code - Intake Air Temperature Sensor Circuit High Input
Quick Answer
The Intake Air Temperature (IAT) sensor is built into Mass Air Flow (MAF) sensor. Common causes include Dirty Air Filter, Faulty Intake Air Temperature (IAT) Sensor, Intake Air Temperature Sensor harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0113 2006 Ford Fusion indicates Intake Air Temperature Sensor Circuit High Input.
- Common causes
- Common causes include Dirty Air Filter, Faulty Intake Air Temperature (IAT) Sensor, Intake Air Temperature Sensor harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0113 2006 Ford Fusion Description
What are the Possible Causes of the DTC P0113 2006 Ford Fusion?
- Dirty Air Filter
- Faulty Intake Air Temperature (IAT) Sensor
- Intake Air Temperature Sensor harness is open or shorted
- Intake Air Temperature Sensor circuit poor electrical connection
- Faulty Powertrain Control Module (PCM)
How to Fix the DTC P0113 2006 Ford Fusion?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0113 2006 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0113 2006 Ford Fusion code?
Need more information on how to fix the P0113 2006 Ford Fusion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0113 2006 Ford Fusion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0113 2006 Ford Fusion Code
1. What are the common symptoms of OBDII code P0113 in a 2006 Ford Fusion?
- Common symptoms include poor fuel economy, rough idling, lack of power, and illuminated Check Engine Light.
2. What does the OBDII code P0113 on a 2006 Ford Fusion indicate?
- The code P0113 indicates a high input in the intake air temperature sensor circuit.
3. What are the possible causes of OBDII code P0113 in a 2006 Ford Fusion?
- Possible causes include a faulty intake air temperature sensor, damaged wiring or connectors, or a problem with the sensor circuit.
4. How can I diagnose the intake air temperature sensor circuit on a 2006 Ford Fusion with code P0113?
- You can use a multimeter to test the resistance of the sensor, check for continuity in the wiring, and inspect the sensor connector for any signs of damage.
5. Can a dirty air filter trigger OBDII code P0113 on a 2006 Ford Fusion?
- Yes, a dirty air filter can affect the intake air temperature readings and potentially trigger code P0113.
6. Is it safe to continue driving a 2006 Ford Fusion with OBDII code P0113?
- It is generally not recommended to continue driving with this code as it can negatively impact the engine's performance and fuel efficiency.
7. How can I reset the Check Engine Light after repairing OBDII code P0113 on a 2006 Ford Fusion?
- You can reset the Check Engine Light using an OBDII scanner or by disconnecting the car's battery for a few minutes.
8. Can a DIY enthusiast repair OBDII code P0113 on a 2006 Ford Fusion?
- Depending on the cause, DIY enthusiasts can potentially repair this code by replacing the intake air temperature sensor or fixing wiring issues.
9. Is it necessary to replace the entire intake air temperature sensor if OBDII code P0113 appears on a 2006 Ford Fusion?
- Not necessarily. Sometimes, the issue can be resolved by cleaning the sensor or repairing the wiring connections.
10. How much does it typically cost to repair OBDII code P0113 on a 2006 Ford Fusion at a mechanic's shop?
- The cost can vary depending on the exact cause of the issue, but it may range from $100 to $300 for parts and labor.
Discuss the causes and fixes for P0113 2006 Ford Fusion OBDII Code
Code P0113 2006 Ford Fusion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
