P0113 2002 Toyota Corolla Code - Intake Air Temperature Circuit High Input 3ZZ-FE Engine
Quick Answer
The Intake Air Temperature (IAT) sensor is built into mass air flow sensor or in some vehicles mounted to the air filter duct housing. Common causes include Faulty Intake Air Temperature (IAT) sensor, Dirty air filter, Intake Air Temperature (IAT) sensor harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0113 2002 Toyota Corolla indicates Intake Air Temperature Circuit High Input 3ZZ-FE Engine.
- Common causes
- Common causes include Faulty Intake Air Temperature (IAT) sensor, Dirty air filter, Intake Air Temperature (IAT) sensor harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0113 2002 Toyota Corolla Description
What are the Possible Causes of the DTC P0113 2002 Toyota Corolla?
- Faulty Intake Air Temperature (IAT) sensor
- Dirty air filter
- Intake Air Temperature (IAT) sensor harness is open or shorted
- Intake Air Temperature (IAT) sensor circuit poor electrical connection
How to Fix the DTC P0113 2002 Toyota Corolla?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0113 2002 Toyota Corolla code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0113 2002 Toyota Corolla code?
Need more information on how to fix the P0113 2002 Toyota Corolla code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0113 2002 Toyota Corolla code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0113 2002 Toyota Corolla Code
1. What are the common symptoms of OBDII code P0113 in a 2002 Toyota Corolla with a 3ZZ-FE engine?
The common symptoms include poor fuel economy, rough idling, stalling, and a decrease in overall engine performance.
2. What does the OBDII code P0113 "Intake Air Temperature Circuit High Input" mean for a 2002 Toyota Corolla?
This code indicates that the Engine Control Module (ECM) has detected a high input signal from the intake air temperature sensor.
3. What are the possible causes of OBDII code P0113 in a 2002 Toyota Corolla with a 3ZZ-FE engine?
Possible causes include a faulty intake air temperature sensor, damaged wiring or connectors in the sensor circuit, or a problem with the ECM itself.
4. How can I diagnose the cause of OBDII code P0113 in my 2002 Toyota Corolla?
You can use a multimeter to test the intake air temperature sensor, inspect the wiring and connectors for damage, and perform a thorough visual inspection of the intake air temperature sensor circuit.
5. What are some repair tips for resolving OBDII code P0113 in a 2002 Toyota Corolla?
Repair tips include replacing the intake air temperature sensor if it is faulty, repairing any damaged wiring or connectors, and resetting the ECM to clear the trouble code.
6. Can driving with OBDII code P0113 in a 2002 Toyota Corolla cause further damage to the vehicle?
Continued driving with this code may lead to decreased fuel efficiency, engine performance issues, and potential damage to other engine components over time. It is recommended to address the issue promptly.
7. Is it safe to reset the ECM to clear the OBDII code P0113 in a 2002 Toyota Corolla?
Yes, resetting the ECM is a common step in clearing trouble codes. However, it is important to first diagnose and repair the underlying issue causing the code to prevent it from recurring.
8. How much does it typically cost to repair OBDII code P0113 in a 2002 Toyota Corolla at a mechanic or dealership?
The cost of repair can vary depending on the root cause of the issue. It may range from a simple sensor replacement to more extensive wiring repairs. It is advisable to get a diagnostic inspection to determine the exact cost.
9. Can I drive my 2002 Toyota Corolla with OBDII code P0113 without causing further damage?
While it may be possible to drive the vehicle with this code, it is recommended to address the issue as soon as possible to prevent potential damage and ensure optimal engine performance and fuel efficiency.
10. How long does it typically take to repair OBDII code P0113 in a 2002 Toyota Corolla?
The repair time can vary depending on the exact cause of the issue and the complexity of the repair. In general, it may take anywhere from a few hours to a day for a mechanic to diagnose and fix the problem.
Discuss the causes and fixes for P0113 2002 Toyota Corolla OBDII Code
Code P0113 2002 Toyota Corolla comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
