P0113 2000 Honda Civic Code - Intake Air Temperature Sensor Circuit High Voltage
Quick Answer
The Intake Air Temperature (IAT) sensor is built into mass air flow sensor or in some vehicles mounted to the air filter duct housing. Common causes include Faulty Intake Air Temperature (IAT) sensor, Dirty air filter, Intake Air Temperature (IAT) sensor harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0113 2000 Honda Civic indicates Intake Air Temperature Sensor Circuit High Voltage.
- Common causes
- Common causes include Faulty Intake Air Temperature (IAT) sensor, Dirty air filter, Intake Air Temperature (IAT) sensor harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0113 2000 Honda Civic Description
What are the Possible Causes of the DTC P0113 2000 Honda Civic?
- Faulty Intake Air Temperature (IAT) sensor
- Dirty air filter
- Intake Air Temperature (IAT) sensor harness is open or shorted
- Intake Air Temperature (IAT) sensor circuit poor electrical connection
How to Fix the DTC P0113 2000 Honda Civic?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0113 2000 Honda Civic code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0113 2000 Honda Civic code?
Need more information on how to fix the P0113 2000 Honda Civic code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0113 2000 Honda Civic code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0113 2000 Honda Civic Code
1. What does the OBDII code P0113 on my 2000 Honda Civic indicate?
- This code, Intake Air Temperature Sensor Circuit High Voltage (P0113), typically points to an issue with the intake air temperature sensor circuit.
2. What are the common symptoms associated with OBDII code P0113 on a 2000 Honda Civic?
- Common symptoms may include poor fuel economy, rough idling, engine stalling, and a decrease in overall engine performance.
3. What are the possible causes of the P0113 code on a 2000 Honda Civic?
- The code P0113 can be triggered by a faulty intake air temperature sensor, damaged wiring or connectors in the sensor circuit, or a problem with the engine control module (ECM).
4. How can I diagnose the cause of the P0113 code on my 2000 Honda Civic?
- To pinpoint the issue, you can use a multimeter to test the intake air temperature sensor, inspect the sensor wiring for damage, and check the ECM for any faults.
5. Can a dirty air filter cause the P0113 code on a 2000 Honda Civic?
- While a dirty air filter can affect engine performance, it is not a common cause of the P0113 code. However, it's still good practice to ensure the air filter is clean and not obstructed.
6. How do I repair the Intake Air Temperature Sensor Circuit High Voltage issue (P0113) on my 2000 Honda Civic?
- Repairing the P0113 code may involve replacing the intake air temperature sensor, repairing or replacing damaged wiring, or reprogramming the ECM if necessary.
7. Is it safe to drive my 2000 Honda Civic with the P0113 code present?
- It is not recommended to drive your vehicle with the P0113 code as it can lead to further damage and potentially unsafe driving conditions due to the compromised engine performance.
8. Can resetting the OBDII code P0113 on my 2000 Honda Civic make it go away permanently?
- Simply clearing the code may not solve the underlying issue causing the P0113 code. It's important to diagnose and repair the root cause to prevent the code from reappearing.
9. Will replacing the intake air temperature sensor fix the P0113 code on my 2000 Honda Civic?
- In many cases, replacing the faulty intake air temperature sensor can resolve the P0113 code. However, it's recommended to diagnose the issue thoroughly before replacing any components.
10. How can I prevent the P0113 code from reoccurring on my 2000 Honda Civic in the future?
- To prevent the P0113 code from coming back, regularly inspect and maintain the intake air temperature sensor, check for any damaged wiring, and address any underlying issues promptly.
Discuss the causes and fixes for P0113 2000 Honda Civic OBDII Code
Code P0113 2000 Honda Civic comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
