P0113 1998 Honda Civic Code - Intake Air Temperature Sensor Circuit High Voltage
Quick Answer
The Intake Air Temperature (IAT) sensor is built into mass air flow sensor or in some vehicles mounted to the air filter duct housing. Common causes include Faulty Intake Air Temperature (IAT) sensor, Dirty air filter, Intake Air Temperature (IAT) sensor harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0113 1998 Honda Civic indicates Intake Air Temperature Sensor Circuit High Voltage.
- Common causes
- Common causes include Faulty Intake Air Temperature (IAT) sensor, Dirty air filter, Intake Air Temperature (IAT) sensor harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0113 1998 Honda Civic Description
What are the Possible Causes of the DTC P0113 1998 Honda Civic?
- Faulty Intake Air Temperature (IAT) sensor
- Dirty air filter
- Intake Air Temperature (IAT) sensor harness is open or shorted
- Intake Air Temperature (IAT) sensor circuit poor electrical connection
How to Fix the DTC P0113 1998 Honda Civic?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0113 1998 Honda Civic code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0113 1998 Honda Civic code?
Need more information on how to fix the P0113 1998 Honda Civic code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0113 1998 Honda Civic code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0113 1998 Honda Civic Code
1. What are the common symptoms of OBDII code P0113 on a 1998 Honda Civic?
The common symptoms of code P0113 on a 1998 Honda Civic include poor fuel economy, rough idling, lack of power, and possibly an illuminated check engine light.
2. What does the OBDII code P0113 indicate on a 1998 Honda Civic?
Code P0113 on a 1998 Honda Civic indicates a high voltage condition in the Intake Air Temperature (IAT) sensor circuit.
3. What are the possible causes of OBDII code P0113 on a 1998 Honda Civic?
Possible causes of code P0113 on a 1998 Honda Civic include a faulty Intake Air Temperature sensor, damaged or corroded wiring in the sensor circuit, or a malfunctioning Engine Control Module (ECM).
4. How can I diagnose the cause of OBDII code P0113 on my 1998 Honda Civic?
You can diagnose the cause of code P0113 by visually inspecting the IAT sensor and its wiring, testing the sensor's resistance, and checking for voltage in the sensor circuit using a multimeter.
5. Can I drive my 1998 Honda Civic with OBDII code P0113?
It is not recommended to drive your 1998 Honda Civic with code P0113 as it can lead to poor engine performance and potential damage if left unresolved.
6. How can I repair OBDII code P0113 on my 1998 Honda Civic?
To repair code P0113 on a 1998 Honda Civic, you may need to replace the Intake Air Temperature sensor, repair or replace damaged wiring, or reprogram the Engine Control Module (ECM).
7. Is it safe to clear the OBDII code P0113 on my 1998 Honda Civic without fixing the issue?
Clearing the code without fixing the underlying issue may temporarily turn off the check engine light, but the problem will persist and could potentially lead to further engine issues.
8. How much does it cost to fix OBDII code P0113 on a 1998 Honda Civic?
The cost to fix code P0113 on a 1998 Honda Civic can vary depending on the cause of the issue, but it may range from $50 to $200 for parts and labor.
9. Can a DIY enthusiast fix OBDII code P0113 on a 1998 Honda Civic?
Depending on your experience and tools, a DIY enthusiast may be able to fix code P0113 by replacing the Intake Air Temperature sensor and checking the wiring for any faults.
10. How often does OBDII code P0113 occur in a 1998 Honda Civic?
Code P0113 in a 1998 Honda Civic can occur due to various reasons, but it is not a common issue compared to other OBDII codes.
Discuss the causes and fixes for P0113 1998 Honda Civic OBDII Code
Code P0113 1998 Honda Civic comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
