P0112 2010 Nissan Versa Code - Intake Air Temperature Circuit Low Input
Quick Answer
The Intake Air Temperature (IAT) sensor is built into mass air flow sensor or in some vehicles mounted to the air filter duct housing. Common causes include Faulty Intake Air Temperature (IAT) sensor, Dirty air filter, Intake Air Temperature (IAT) sensor harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0112 2010 Nissan Versa indicates Intake Air Temperature Circuit Low Input.
- Common causes
- Common causes include Faulty Intake Air Temperature (IAT) sensor, Dirty air filter, Intake Air Temperature (IAT) sensor harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0112 2010 Nissan Versa Description
What are the Possible Causes of the DTC P0112 2010 Nissan Versa?
- Faulty Intake Air Temperature (IAT) sensor
- Dirty air filter
- Intake Air Temperature (IAT) sensor harness is open or shorted
- Intake Air Temperature (IAT) sensor circuit poor electrical connection
How to Fix the DTC P0112 2010 Nissan Versa?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0112 2010 Nissan Versa code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0112 2010 Nissan Versa code?
Need more information on how to fix the P0112 2010 Nissan Versa code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0112 2010 Nissan Versa code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0112 2010 Nissan Versa Code
1. What are the common symptoms of OBDII code P0112 on a 2010 Nissan Versa?
The common symptoms of OBDII code P0112 on a 2010 Nissan Versa include poor engine performance, rough idling, stalling, and a decrease in fuel efficiency.
2. What does the OBDII code P0112 mean on a 2010 Nissan Versa?
OBDII code P0112 for a 2010 Nissan Versa indicates a low input signal from the intake air temperature (IAT) sensor circuit.
3. What are the possible causes of OBDII code P0112 on a 2010 Nissan Versa?
Possible causes of OBDII code P0112 on a 2010 Nissan Versa include a faulty IAT sensor, damaged sensor wiring, a disconnected sensor, or a problem with the sensor's ground connection.
4. How can I diagnose the OBDII code P0112 on my 2010 Nissan Versa?
To diagnose OBDII code P0112 on a 2010 Nissan Versa, you can use a scan tool to check for the code, visually inspect the IAT sensor and its wiring, test the sensor's resistance, and verify the sensor's voltage output.
5. Can I continue driving my 2010 Nissan Versa with OBDII code P0112?
It is not recommended to continue driving your 2010 Nissan Versa with OBDII code P0112, as it can lead to poor engine performance and potential damage if left unresolved.
6. How can I repair OBDII code P0112 on a 2010 Nissan Versa?
To repair OBDII code P0112 on a 2010 Nissan Versa, you may need to replace the faulty IAT sensor, repair any damaged wiring, ensure proper sensor connection, and clear the trouble codes with a scan tool.
7. Will resetting the check engine light fix OBDII code P0112 on a 2010 Nissan Versa?
Resetting the check engine light may temporarily clear the code, but it will not fix the underlying issue causing OBDII code P0112 on a 2010 Nissan Versa.
8. How important is the intake air temperature sensor in a 2010 Nissan Versa?
The intake air temperature sensor is crucial for providing the engine control module with accurate temperature data to adjust fuel delivery and ignition timing, impacting overall engine performance.
9. Can a dirty air filter trigger OBDII code P0112 on a 2010 Nissan Versa?
A dirty air filter may indirectly affect the intake air temperature reading but is not a direct cause of OBDII code P0112 on a 2010 Nissan Versa.
10. Are there any recalls related to OBDII code P0112 on a 2010 Nissan Versa?
Recalls related to OBDII code P0112 on a 2010 Nissan Versa would be specific to the vehicle's VIN. Check with a Nissan dealership or the National Highway Traffic Safety Administration for any relevant recalls.
Discuss the causes and fixes for P0112 2010 Nissan Versa OBDII Code
Code P0112 2010 Nissan Versa comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
