P0112 2010 Nissan Rogue Code - Intake Air Temperature Circuit Low Input
Quick Answer
The Intake Air Temperature (IAT) sensor is built into mass air flow sensor or in some vehicles mounted to the air filter duct housing. Common causes include Faulty Intake Air Temperature (IAT) sensor, Dirty air filter, Intake Air Temperature (IAT) sensor harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0112 2010 Nissan Rogue indicates Intake Air Temperature Circuit Low Input.
- Common causes
- Common causes include Faulty Intake Air Temperature (IAT) sensor, Dirty air filter, Intake Air Temperature (IAT) sensor harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0112 2010 Nissan Rogue Description
What are the Possible Causes of the DTC P0112 2010 Nissan Rogue?
- Faulty Intake Air Temperature (IAT) sensor
- Dirty air filter
- Intake Air Temperature (IAT) sensor harness is open or shorted
- Intake Air Temperature (IAT) sensor circuit poor electrical connection
How to Fix the DTC P0112 2010 Nissan Rogue?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0112 2010 Nissan Rogue code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0112 2010 Nissan Rogue code?
Need more information on how to fix the P0112 2010 Nissan Rogue code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0112 2010 Nissan Rogue code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0112 2010 Nissan Rogue Code
1. What are the common symptoms of OBDII code P0112 in a 2010 Nissan Rogue?
- Common symptoms include rough idling, decreased fuel efficiency, engine stalling, and potentially an illuminated Check Engine light.
2. What does the OBDII code P0112 in a 2010 Nissan Rogue indicate?
- The code P0112 specifically points to an issue with the Intake Air Temperature (IAT) sensor circuit showing a low input.
3. What are some possible causes of OBDII code P0112 in a 2010 Nissan Rogue?
- The causes can include a faulty IAT sensor, damaged wiring or connectors in the IAT circuit, or problems with the Engine Control Module (ECM).
4. How can I diagnose the OBDII code P0112 in my 2010 Nissan Rogue?
- Diagnosis typically involves checking the IAT sensor's resistance, inspecting the wiring and connectors for any damage, and using a scan tool to monitor the sensor's readings.
5. Can a dirty air filter cause OBDII code P0112 in a 2010 Nissan Rogue?
- A dirty air filter might not directly trigger the P0112 code, but it can affect the overall air intake system, leading to potential issues with the IAT sensor readings.
6. Is it safe to continue driving with OBDII code P0112 present in a 2010 Nissan Rogue?
- It is generally not recommended to continue driving with the P0112 code as it can impact engine performance and fuel efficiency. It's best to address the issue promptly.
7. How can I repair OBDII code P0112 in my 2010 Nissan Rogue?
- Repair methods may include replacing the IAT sensor, repairing damaged wiring or connectors, or resetting the ECM after fixing any underlying issues.
8. Can I fix OBDII code P0112 in a 2010 Nissan Rogue myself?
- Depending on your skill level and access to tools, you may be able to address the P0112 code yourself by following diagnostic procedures and making necessary repairs.
9. How much does it cost to fix OBDII code P0112 in a 2010 Nissan Rogue at a repair shop?
- The cost of fixing the P0112 code can vary based on the exact cause of the issue, but it may involve parts and labor costs ranging from $100 to $300 or more at a repair shop.
10. Will resetting the Check Engine light clear OBDII code P0112 in a 2010 Nissan Rogue?
- Resetting the Check Engine light will clear the code temporarily, but if the underlying issue causing the P0112 code is not addressed, the code is likely to reappear.
Discuss the causes and fixes for P0112 2010 Nissan Rogue OBDII Code
Code P0112 2010 Nissan Rogue comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
