P0112 2008 Toyota Camry Code - Intake Air Temperature Circuit Low Input
Quick Answer
The Intake Air Temperature (IAT) sensor is built into mass air flow sensor or in some vehicles mounted to the air filter duct housing. Common causes include Faulty Intake Air Temperature (IAT) sensor, Dirty air filter, Intake Air Temperature (IAT) sensor harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0112 2008 Toyota Camry indicates Intake Air Temperature Circuit Low Input.
- Common causes
- Common causes include Faulty Intake Air Temperature (IAT) sensor, Dirty air filter, Intake Air Temperature (IAT) sensor harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0112 2008 Toyota Camry Description
What are the Possible Causes of the DTC P0112 2008 Toyota Camry?
- Faulty Intake Air Temperature (IAT) sensor
- Dirty air filter
- Intake Air Temperature (IAT) sensor harness is open or shorted
- Intake Air Temperature (IAT) sensor circuit poor electrical connection
How to Fix the DTC P0112 2008 Toyota Camry?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0112 2008 Toyota Camry code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0112 2008 Toyota Camry code?
Need more information on how to fix the P0112 2008 Toyota Camry code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0112 2008 Toyota Camry code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0112 2008 Toyota Camry Code
1. What are common symptoms of OBDII code P0112 in a 2008 Toyota Camry?
The common symptoms include poor engine performance, rough idling, decreased fuel efficiency, and potential stalling.
2. What does the OBDII code P0112 in a 2008 Toyota Camry indicate?
The code P0112 indicates that there is a low input signal from the intake air temperature (IAT) sensor circuit.
3. What are the possible causes of OBDII code P0112 in a 2008 Toyota Camry?
Possible causes include a faulty IAT sensor, damaged or corroded sensor wiring, a disconnected sensor connector, or a problem with the engine's computer.
4. How can I diagnose the cause of OBDII code P0112 in my 2008 Toyota Camry?
You can use a multimeter to test the IAT sensor's resistance, visually inspect the sensor wiring and connector for damage, and use a scan tool to monitor sensor data for abnormalities.
5. Can I drive my 2008 Toyota Camry with OBDII code P0112?
It is not recommended to drive your vehicle with this code, as it can lead to further engine damage and poor performance. It is best to address the issue promptly.
6. How can I repair OBDII code P0112 in my 2008 Toyota Camry?
Repair options include replacing the faulty IAT sensor, repairing damaged wiring or connectors, and resetting the trouble code with an OBDII scanner after completing repairs.
7. Is it safe to reset the OBDII code P0112 in my 2008 Toyota Camry without repairing the issue?
Resetting the code without addressing the underlying problem may temporarily turn off the check engine light, but the issue will likely reappear once the system detects the fault again.
8. Can a dirty air filter trigger OBDII code P0112 in a 2008 Toyota Camry?
A dirty air filter may not directly cause this code, but it can affect the overall performance of the engine and potentially contribute to related issues like the IAT sensor reading incorrectly.
9. How long does it typically take to fix OBDII code P0112 in a 2008 Toyota Camry?
The repair time can vary depending on the exact cause of the code, but it may take anywhere from 30 minutes to a few hours to diagnose and fix the issue.
10. Will OBDII code P0112 affect the emissions of my 2008 Toyota Camry?
Yes, unresolved issues related to this code can affect emissions and cause your vehicle to fail an emissions test. It is important to address the problem promptly to maintain proper engine performance and emissions control.
Discuss the causes and fixes for P0112 2008 Toyota Camry OBDII Code
Code P0112 2008 Toyota Camry comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
