P0112 2008 Nissan Rogue Code - Intake Air Temperature Circuit Low Input
Quick Answer
The Intake Air Temperature (IAT) sensor is built into mass air flow sensor or in some vehicles mounted to the air filter duct housing. Common causes include Faulty Intake Air Temperature (IAT) sensor, Dirty air filter, Intake Air Temperature (IAT) sensor harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0112 2008 Nissan Rogue indicates Intake Air Temperature Circuit Low Input.
- Common causes
- Common causes include Faulty Intake Air Temperature (IAT) sensor, Dirty air filter, Intake Air Temperature (IAT) sensor harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0112 2008 Nissan Rogue Description
What are the Possible Causes of the DTC P0112 2008 Nissan Rogue?
- Faulty Intake Air Temperature (IAT) sensor
- Dirty air filter
- Intake Air Temperature (IAT) sensor harness is open or shorted
- Intake Air Temperature (IAT) sensor circuit poor electrical connection
How to Fix the DTC P0112 2008 Nissan Rogue?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0112 2008 Nissan Rogue code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0112 2008 Nissan Rogue code?
Need more information on how to fix the P0112 2008 Nissan Rogue code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0112 2008 Nissan Rogue code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0112 2008 Nissan Rogue Code
1. What are the common symptoms of OBDII code P0112 on a 2008 Nissan Rogue?
- Common symptoms include poor fuel economy, rough idling, stalling, and a lack of power during acceleration.
2. What does the OBDII code P0112 "Intake Air Temperature Circuit Low Input" mean for a 2008 Nissan Rogue?
- This code indicates that the intake air temperature sensor is reporting a temperature that is lower than expected.
3. What are the potential causes of OBDII code P0112 on a 2008 Nissan Rogue?
- Possible causes include a faulty intake air temperature sensor, damaged sensor wiring, or a problem with the engine control module.
4. How can I diagnose the OBDII code P0112 on my 2008 Nissan Rogue?
- You can start by inspecting the intake air temperature sensor and its wiring for any visible damage. Using a multimeter, you can also test the sensor's resistance and voltage readings.
5. What are some repair tips for addressing OBDII code P0112 on a 2008 Nissan Rogue?
- Repair tips include replacing the intake air temperature sensor if it is faulty, repairing any damaged wiring, and resetting the fault code to see if it reoccurs.
6. Can driving with OBDII code P0112 on a 2008 Nissan Rogue cause further damage?
- While driving with this code may not immediately harm the vehicle, it is recommended to address the issue promptly to prevent potential performance issues or damage to other components.
7. Is it safe to continue driving my 2008 Nissan Rogue with OBDII code P0112?
- It is generally safe to drive the vehicle with this code, but it is advisable to have the issue diagnosed and repaired as soon as possible to prevent any further complications.
8. Will resetting the OBDII code P0112 on my 2008 Nissan Rogue make it go away permanently?
- Resetting the fault code may temporarily clear it, but if the underlying issue causing the code is not addressed, it is likely to reappear after driving cycles.
9. Can a DIY enthusiast fix OBDII code P0112 on a 2008 Nissan Rogue?
- Depending on your mechanical skills and tools available, you may be able to address this code yourself by replacing the intake air temperature sensor or repairing wiring issues.
10. How much does it typically cost to repair OBDII code P0112 on a 2008 Nissan Rogue at a professional mechanic?
- The cost of repairing this code can vary depending on the specific issue, but it may range from approximately $100 to $300, including parts and labor.
Discuss the causes and fixes for P0112 2008 Nissan Rogue OBDII Code
Code P0112 2008 Nissan Rogue comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
