P0111 2010 Honda Accord Code - Intake Air Temperature Circuit Range/Performance Problem
Quick Answer
The Intake Air Temperature (IAT) sensor is built into mass air flow sensor or in some vehicles mounted to the air filter duct housing. Common causes include Faulty Intake Air Temperature (IAT) sensor, Dirty air filter, Intake Air Temperature (IAT) sensor harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0111 2010 Honda Accord indicates Intake Air Temperature Circuit Range/Performance Problem.
- Common causes
- Common causes include Faulty Intake Air Temperature (IAT) sensor, Dirty air filter, Intake Air Temperature (IAT) sensor harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0111 2010 Honda Accord Description
What are the Possible Causes of the DTC P0111 2010 Honda Accord?
- Faulty Intake Air Temperature (IAT) sensor
- Dirty air filter
- Intake Air Temperature (IAT) sensor harness is open or shorted
- Intake Air Temperature (IAT) sensor circuit poor electrical connection
How to Fix the DTC P0111 2010 Honda Accord?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0111 2010 Honda Accord code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0111 2010 Honda Accord code?
Need more information on how to fix the P0111 2010 Honda Accord code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0111 2010 Honda Accord code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0111 2010 Honda Accord Code
1. What are the common symptoms of OBDII code P0111 in a 2010 Honda Accord?
The common symptoms of code P0111 include poor engine performance, rough idling, decreased fuel efficiency, and potential stalling.
2. What does the OBDII code P0111 on a 2010 Honda Accord indicate?
Code P0111 indicates an Intake Air Temperature Circuit Range/Performance Problem in the vehicle's engine control module (ECM).
3. What are the possible causes of OBDII code P0111 in a 2010 Honda Accord?
The possible causes of code P0111 in a 2010 Honda Accord may include a faulty intake air temperature (IAT) sensor, damaged wiring or connectors in the IAT circuit, or a malfunctioning ECM.
4. How can I diagnose the OBDII code P0111 in my 2010 Honda Accord?
To diagnose code P0111, you can use an OBDII scanner to retrieve the fault codes, visually inspect the IAT sensor and its wiring for damage, and test the sensor's resistance with a multimeter.
5. Can a dirty air filter trigger the OBDII code P0111 in a 2010 Honda Accord?
A dirty air filter may not directly trigger code P0111, but it can affect the air intake temperature readings, leading to potential issues with the IAT sensor and triggering the code.
6. How can I repair OBDII code P0111 in my 2010 Honda Accord?
Repairing code P0111 may involve replacing the faulty IAT sensor, repairing damaged wiring or connectors, or resetting the ECM to clear the code and see if it returns.
7. Is it safe to continue driving with OBDII code P0111 illuminated in a 2010 Honda Accord?
It is generally not recommended to continue driving with the P0111 code illuminated, as it can lead to further engine problems and decreased performance if left unresolved.
8. Can a DIY enthusiast fix OBDII code P0111 in a 2010 Honda Accord?
If you have the necessary tools and automotive knowledge, you may be able to diagnose and repair code P0111 yourself by following proper diagnostic procedures and checking the components involved.
9. How much does it cost to fix OBDII code P0111 in a 2010 Honda Accord at a repair shop?
The cost of fixing code P0111 can vary depending on the exact cause of the issue, but it may range from $100 to $300 at a repair shop, including parts and labor.
10. Will resetting the check engine light resolve OBDII code P0111 in a 2010 Honda Accord?
Resetting the check engine light may temporarily clear the code, but if the underlying issue causing code P0111 is not addressed, the light is likely to come back on after some driving cycles.
Discuss the causes and fixes for P0111 2010 Honda Accord OBDII Code
Code P0111 2010 Honda Accord comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
