P0108 KIA Code - Manifold Absolute Pressure/Barometric Pressure Circuit High Input
Quick Answer
The Manifold Absolute Pressure (MAP) sensor measures the pressure inside the intake manifold. Common causes include Faulty Manifold Absolute Pressure (MAP) Sensor, Manifold Absolute Pressure Sensor harness is open or shorted, Manifold Absolute Pressure Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0108 KIA indicates Manifold Absolute Pressure/Barometric Pressure Circuit High Input.
- Common causes
- Common causes include Faulty Manifold Absolute Pressure (MAP) Sensor, Manifold Absolute Pressure Sensor harness is open or shorted, Manifold Absolute Pressure Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0108 KIA Description
The MAP sensor wiring includes 3 circuits. The Engine Control Module (ECM) supplies a regulated 5 volts to the sensor on a 5 V reference circuit. The ECM supplies ground on a low reference circuit. The MAP sensor provides a signal voltage to the ECM, relative to the pressure changes, on the MAP sensor signal circuit. The ECM converts the signal voltage input to a pressure value.
Under normal operation the greatest pressure that can exist in the intake manifold is at ignition ON, engine OFF, which is equal to the BARO. The lowest manifold pressure occurs when the vehicle is idling or decelerating. The ECM monitors the MAP sensor signal for pressure outside of the normal range.
The Diagnostic Trouble Code (DTC) will be set when the ECM detects that the MAP Sensor voltage is more than 4.50 V for greater than 13 ms.
What are the Possible Causes of the DTC P0108 KIA?
- Faulty Manifold Absolute Pressure (MAP) Sensor
- Manifold Absolute Pressure Sensor harness is open or shorted
- Manifold Absolute Pressure Sensor circuit poor electrical connection
- Faulty Engine Control Module (ECM)
How to Fix the DTC P0108 KIA?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0108 KIA code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0108 KIA code?
Need more information on how to fix the P0108 KIA code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0108 KIA code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0108 KIA Code
1. What are the common symptoms of OBDII code P0108 in a KIA?
- Common symptoms include rough idling, decreased fuel efficiency, stalling, and hesitation during acceleration.
2. What does the OBDII code P0108 in a KIA indicate?
- The code P0108 indicates a high input in the Manifold Absolute Pressure (MAP) or Barometric Pressure (BARO) circuit.
3. What are the possible causes of OBDII code P0108 in a KIA?
- Possible causes include a faulty MAP sensor, issues with the wiring or connectors in the MAP circuit, or a problem with the engine control module (ECM).
4. How can I diagnose the cause of OBDII code P0108 in my KIA?
- Diagnose by checking the MAP sensor's voltage output, inspecting the wiring for any damage or loose connections, and scanning the ECM for any related fault codes.
5. How serious is OBDII code P0108 in a KIA?
- While the vehicle may still be driveable with this code, it is important to address it promptly to prevent potential engine damage and ensure optimal performance.
6. Can I repair OBDII code P0108 in my KIA myself?
- Depending on your mechanical skills, you may be able to replace the MAP sensor or repair wiring issues yourself. However, consulting a professional is recommended for accurate diagnosis and repair.
7. Is it safe to continue driving with OBDII code P0108 in a KIA?
- It is not recommended to drive for an extended period with this code, as it can lead to poor engine performance and potential long-term damage if left unresolved.
8. How much does it typically cost to repair OBDII code P0108 in a KIA?
- The cost of repairing this code can vary depending on the specific cause, but it may range from $100 to $300 for parts and labor.
9. Will resetting the OBDII code P0108 in a KIA make it go away permanently?
- Resetting the code may temporarily clear the check engine light, but if the underlying issue is not fixed, the code is likely to reappear after driving the vehicle for some time.
10. How can I prevent OBDII code P0108 from appearing in my KIA in the future?
- Regular maintenance, such as checking and cleaning the MAP sensor, inspecting wiring connections, and addressing any engine performance issues promptly, can help prevent the recurrence of this code.
Discuss the causes and fixes for P0108 KIA OBDII Code
-
como estan todos, gracias por la ayuda y gracias por encontrarlos dios los bendiga.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
