P0108 Isuzu Code - Manifold Absolute Pressure Sensor High Voltage
Quick Answer
The Manifold Absolute Pressure (MAP) sensor measures the pressure inside the intake manifold. Common causes include Faulty Manifold Absolute Pressure (MAP) Sensor, Manifold Absolute Pressure Sensor harness is open or shorted, Manifold Absolute Pressure Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0108 Isuzu indicates Manifold Absolute Pressure Sensor High Voltage.
- Common causes
- Common causes include Faulty Manifold Absolute Pressure (MAP) Sensor, Manifold Absolute Pressure Sensor harness is open or shorted, Manifold Absolute Pressure Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0108 Isuzu Description
The MAP sensor wiring includes 3 circuits. The Engine Control Module (ECM) supplies a regulated 5 volts to the sensor on a 5 V reference circuit. The ECM supplies ground on a low reference circuit. The MAP sensor provides a signal voltage to the ECM, relative to the pressure changes, on the MAP sensor signal circuit. The ECM converts the signal voltage input to a pressure value.
Under normal operation the greatest pressure that can exist in the intake manifold is at ignition ON, engine OFF, which is equal to the BARO. The lowest manifold pressure occurs when the vehicle is idling or decelerating. The ECM monitors the MAP sensor signal for pressure outside of the normal range.
The Diagnostic Trouble Code (DTC) will be set when the ECM detects that the MAP Sensor voltage is more than 4.50 V for greater than 13 ms.
What are the Possible Causes of the DTC P0108 Isuzu?
- Faulty Manifold Absolute Pressure (MAP) Sensor
- Manifold Absolute Pressure Sensor harness is open or shorted
- Manifold Absolute Pressure Sensor circuit poor electrical connection
- Faulty Engine Control Module (ECM)
How to Fix the DTC P0108 Isuzu?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0108 Isuzu code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0108 Isuzu code?
Need more information on how to fix the P0108 Isuzu code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0108 Isuzu code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0108 Isuzu Code
1. What are the common symptoms of OBDII code P0108 in an Isuzu related to the Manifold Absolute Pressure Sensor High Voltage?
Symptoms may include poor engine performance, rough idling, stalling, decreased fuel efficiency, and potential black smoke from the exhaust.
2. What can cause the Manifold Absolute Pressure Sensor High Voltage trouble code (P0108) in an Isuzu?
Possible causes include a faulty MAP sensor, damaged wiring or connectors, a clogged intake manifold, or issues with the engine's vacuum system.
3. How can I diagnose the P0108 code in my Isuzu related to the MAP sensor high voltage?
You can use an OBDII scanner to retrieve the trouble code, visually inspect the MAP sensor and its connections, check for vacuum leaks, and perform voltage tests on the sensor.
4. Can a dirty air filter trigger the P0108 code in an Isuzu?
Yes, a dirty air filter can restrict airflow to the engine, affecting the MAP sensor readings and potentially triggering the high voltage code.
5. Is it safe to continue driving my Isuzu with the P0108 code indicating high voltage from the MAP sensor?
It is not recommended to drive the vehicle with the P0108 code present, as it can lead to further engine damage and poor performance if left unresolved.
6. How much does it typically cost to repair the P0108 code on an Isuzu caused by a faulty MAP sensor?
The cost of replacing a MAP sensor in an Isuzu can vary depending on the model and labor rates, but it typically ranges from $100 to $300.
7. Can I reset the P0108 trouble code in my Isuzu manually after fixing the issue?
After fixing the underlying problem triggering the P0108 code, you can reset the code using an OBDII scanner or by disconnecting the vehicle's battery for a few minutes.
8. Are there any preventive measures to avoid the recurrence of the P0108 code in my Isuzu?
Regular maintenance, such as replacing air filters on schedule, checking for vacuum leaks, and ensuring proper engine operation, can help prevent the reoccurrence of the P0108 trouble code.
9. Will the P0108 code in my Isuzu cause the check engine light to illuminate?
Yes, the P0108 trouble code related to high voltage from the MAP sensor will trigger the check engine light to appear on the dashboard of your Isuzu.
10. How important is it to address the P0108 code promptly in an Isuzu?
It is crucial to address the P0108 trouble code promptly to prevent potential engine damage, poor performance, decreased fuel efficiency, and further complications in your Isuzu.
Discuss the causes and fixes for P0108 Isuzu OBDII Code
Code P0108 Isuzu comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
