P0107 1997 Honda Civic Code - Manifold Absolute Pressure Sensor Circuit Low Voltage
Quick Answer
The Manifold Absolute Pressure (MAP) sensor measures the pressure inside the intake manifold. Common causes include Faulty Manifold Absolute Pressure (MAP) Sensor, Manifold Absolute Pressure Sensor harness is open or shorted, Manifold Absolute Pressure Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0107 1997 Honda Civic indicates Manifold Absolute Pressure Sensor Circuit Low Voltage.
- Common causes
- Common causes include Faulty Manifold Absolute Pressure (MAP) Sensor, Manifold Absolute Pressure Sensor harness is open or shorted, Manifold Absolute Pressure Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0107 1997 Honda Civic Description
The MAP sensor wiring includes 3 circuits. The Engine Control Module (ECM) supplies a regulated 5 volts to the sensor on a 5 V reference circuit. The ECM supplies ground on a low reference circuit. The MAP sensor provides a signal voltage to the ECM, relative to the pressure changes, on the MAP sensor signal circuit. The ECM converts the signal voltage input to a pressure value.
Under normal operation the greatest pressure that can exist in the intake manifold is at ignition ON, engine OFF, which is equal to the BARO. The lowest manifold pressure occurs when the vehicle is idling or decelerating. The ECM monitors the MAP sensor signal for pressure outside of the normal range.
The Diagnostic Trouble Code (DTC) will be set when the ECM detects that the MAP Sensor voltage is less than 0.15 V for greater than 13 ms.
What are the Possible Causes of the DTC P0107 1997 Honda Civic?
- Faulty Manifold Absolute Pressure (MAP) Sensor
- Manifold Absolute Pressure Sensor harness is open or shorted
- Manifold Absolute Pressure Sensor circuit poor electrical connection
- Faulty Engine Control Module (ECM)
How to Fix the DTC P0107 1997 Honda Civic?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0107 1997 Honda Civic code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0107 1997 Honda Civic code?
Need more information on how to fix the P0107 1997 Honda Civic code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0107 1997 Honda Civic code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0107 1997 Honda Civic Code
1. What are the common symptoms of OBDII code P0107 on a 1997 Honda Civic?
The common symptoms of code P0107 on a 1997 Honda Civic include poor engine performance, rough idling, stalling, and a decrease in fuel efficiency.
2. What does the OBDII code P0107 on a 1997 Honda Civic indicate?
Code P0107 indicates that the Manifold Absolute Pressure (MAP) sensor circuit is registering a low voltage input to the Engine Control Module (ECM).
3. What are the possible causes of OBDII code P0107 on a 1997 Honda Civic?
Common causes of code P0107 on a 1997 Honda Civic include a faulty MAP sensor, damaged wiring or connectors in the sensor circuit, or a problem with the ECM.
4. How can I diagnose the cause of OBDII code P0107 on my 1997 Honda Civic?
Diagnosing code P0107 involves checking the MAP sensor for proper operation, inspecting the sensor circuit for any damage, and testing the ECM for faults using a diagnostic scanner.
5. Can a dirty air filter trigger OBDII code P0107 on a 1997 Honda Civic?
Yes, a dirty air filter can restrict airflow to the MAP sensor, leading to incorrect readings and potentially triggering code P0107 on a 1997 Honda Civic.
6. Is it safe to drive my 1997 Honda Civic with OBDII code P0107 active?
It is not recommended to drive your 1997 Honda Civic with code P0107 active, as it can lead to engine performance issues and potential damage if left unresolved.
7. How can I repair OBDII code P0107 on my 1997 Honda Civic?
Repairing code P0107 typically involves replacing the faulty MAP sensor, repairing any damaged wiring or connectors in the circuit, and clearing the code with a diagnostic scanner.
8. Can I reset OBDII code P0107 on my 1997 Honda Civic by disconnecting the battery?
While disconnecting the battery may temporarily clear the code, it is not a permanent solution. It is recommended to diagnose and repair the underlying issue causing code P0107.
9. Will OBDII code P0107 on a 1997 Honda Civic cause the Check Engine Light to illuminate?
Yes, code P0107 will trigger the Check Engine Light to illuminate on a 1997 Honda Civic to alert the driver of a potential issue with the MAP sensor circuit.
10. How long does it typically take to repair OBDII code P0107 on a 1997 Honda Civic?
The repair time for code P0107 on a 1997 Honda Civic can vary depending on the exact cause of the issue, but it can usually be resolved within a few hours by a qualified mechanic.
Discuss the causes and fixes for P0107 1997 Honda Civic OBDII Code
Code P0107 1997 Honda Civic comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
