P0107 1996 Honda Civic Code - Manifold Absolute Pressure Sensor Circuit Low Voltage
Quick Answer
The Manifold Absolute Pressure (MAP) sensor measures the pressure inside the intake manifold. Common causes include Faulty Manifold Absolute Pressure (MAP) Sensor, Manifold Absolute Pressure Sensor harness is open or shorted, Manifold Absolute Pressure Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0107 1996 Honda Civic indicates Manifold Absolute Pressure Sensor Circuit Low Voltage.
- Common causes
- Common causes include Faulty Manifold Absolute Pressure (MAP) Sensor, Manifold Absolute Pressure Sensor harness is open or shorted, Manifold Absolute Pressure Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0107 1996 Honda Civic Description
The MAP sensor wiring includes 3 circuits. The Engine Control Module (ECM) supplies a regulated 5 volts to the sensor on a 5 V reference circuit. The ECM supplies ground on a low reference circuit. The MAP sensor provides a signal voltage to the ECM, relative to the pressure changes, on the MAP sensor signal circuit. The ECM converts the signal voltage input to a pressure value.
Under normal operation the greatest pressure that can exist in the intake manifold is at ignition ON, engine OFF, which is equal to the BARO. The lowest manifold pressure occurs when the vehicle is idling or decelerating. The ECM monitors the MAP sensor signal for pressure outside of the normal range.
The Diagnostic Trouble Code (DTC) will be set when the ECM detects that the MAP Sensor voltage is less than 0.15 V for greater than 13 ms.
What are the Possible Causes of the DTC P0107 1996 Honda Civic?
- Faulty Manifold Absolute Pressure (MAP) Sensor
- Manifold Absolute Pressure Sensor harness is open or shorted
- Manifold Absolute Pressure Sensor circuit poor electrical connection
- Faulty Engine Control Module (ECM)
How to Fix the DTC P0107 1996 Honda Civic?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0107 1996 Honda Civic code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0107 1996 Honda Civic code?
Need more information on how to fix the P0107 1996 Honda Civic code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0107 1996 Honda Civic code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0107 1996 Honda Civic Code
1. What are common symptoms of OBDII code P0107 on a 1996 Honda Civic?
- Common symptoms include poor engine performance, rough idling, stalling, and decreased fuel efficiency.
2. What does the OBDII code P0107 indicate on a 1996 Honda Civic?
- The code indicates a low voltage condition in the Manifold Absolute Pressure (MAP) sensor circuit.
3. What are the possible causes of OBDII code P0107 on a 1996 Honda Civic?
- Possible causes include a faulty MAP sensor, damaged wiring or connectors in the sensor circuit, or a problem with the engine control module (ECM).
4. How can I diagnose the cause of OBDII code P0107 on my 1996 Honda Civic?
- You can use a multimeter to test the voltage output of the MAP sensor, inspect the sensor and its wiring for damage, and check for any loose or corroded connections.
5. Can a dirty air filter cause OBDII code P0107 on a 1996 Honda Civic?
- Yes, a dirty air filter can restrict airflow to the MAP sensor, leading to a low voltage condition and triggering the code.
6. What are some tips for repairing OBDII code P0107 on a 1996 Honda Civic?
- Start by checking and replacing the air filter if necessary, then inspect the MAP sensor and its wiring for any issues. If needed, replace the MAP sensor or repair any damaged wiring.
7. Is it safe to continue driving with OBDII code P0107 on a 1996 Honda Civic?
- It is not recommended to continue driving with this code, as it can lead to further engine problems and decreased performance.
8. Can a DIY enthusiast fix OBDII code P0107 on a 1996 Honda Civic?
- Yes, with the right tools and knowledge, a DIY enthusiast can diagnose and repair OBDII code P0107 by following proper diagnostic procedures.
9. Will resetting the OBDII code P0107 on a 1996 Honda Civic make it go away permanently?
- Resetting the code may temporarily clear the check engine light, but if the underlying issue is not addressed, the code is likely to reappear.
10. How much does it typically cost to repair OBDII code P0107 on a 1996 Honda Civic at a repair shop?
- The cost of repairing OBDII code P0107 can vary depending on the cause of the issue, but it may range from $100 to $300 at a repair shop.
Discuss the causes and fixes for P0107 1996 Honda Civic OBDII Code
Code P0107 1996 Honda Civic comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
