AutoCodes – Ford – P0106 2015 Ford F150

P0106 2015 Ford F150 Code - Manifold Absolute Pressure/Barometric Pressure Sensor Range/Performance

Quick Answer

The Manifold Absolute Pressure (MAP) Sensor is located on the intake manifold and measures the intake manifold pressure. Common causes include Faulty Manifold Absolute Pressure (MAP) Sensor, Manifold Absolute Pressure Sensor harness is open or shorted, Manifold Absolute Pressure Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0106 2015 Ford F150 indicates Manifold Absolute Pressure/Barometric Pressure Sensor Range/Performance.
Common causes: Common causes include Faulty Manifold Absolute Pressure (MAP) Sensor, Manifold Absolute Pressure Sensor harness is open or shorted, Manifold Absolute Pressure Sensor circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs Step-by-Step Diagnostic Guide My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 363

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Sep 21, 2023

Description
Step-by-Step Diagnostic Guide
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0106 2015 Ford F150 Description

The Manifold Absolute Pressure (MAP) Sensor is located on the intake manifold and measures the intake manifold pressure. The Powertrain Control Module (PCM) uses this information to determine the air charge and to provide the input for various engine control functions. Under normal operation, the greatest pressure that can exist in the intake manifold is at ignition ON, and engine OFF, which is equal to the Barometric Pressure (BARO). The lowest manifold pressure occurs when the vehicle is idling or decelerating. The ECM monitors the MAP sensor signal for pressure outside of the normal range. The sensor translates this action into electrical resistance. The MAP sensor may be integrated with an Intake Air Temperature (IAT) sensor. The Diagnostic Trouble Code (DTC) will be set when the MAP Parameter Identification (PID) does not correlate with the BARO PID.

OBDII Code P0106 2015 Ford F150 - Manifold Absolute Pressure/Barometric Pressure Sensor Range/Performance - AutoCodes.com — P0106 2015 Ford F150 Code - Manifold Absolute Pressure/Barometric Pressure Sensor Range/Performance

What does this mean?

What are the Possible Causes of the DTC P0106 2015 Ford F150?

Faulty Manifold Absolute Pressure (MAP) Sensor
Manifold Absolute Pressure Sensor harness is open or shorted
Manifold Absolute Pressure Sensor circuit poor electrical connection

How to Fix the DTC P0106 2015 Ford F150?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0106 2015 Ford F150 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0106 2015 Ford F150 code?

Need more information on how to fix the P0106 2015 Ford F150 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0106 2015 Ford F150 code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0106 2015 Ford F150 Code

1. What does the OBDII code P0106 indicate on a 2015 Ford F150?

The code P0106 indicates that there is a problem with the Manifold Absolute Pressure (MAP) sensor or the Barometric Pressure (Baro) sensor circuit range/performance. This means the sensor's output is not within the expected range or does not correspond appropriately to the current engine conditions.

2. What are common symptoms of code P0106 in a 2015 Ford F150?

Symptoms include engine misfires, rough idling, difficulty starting, a decrease in fuel efficiency, and possibly a stalling engine. The vehicle may also have a "Check Engine" light illuminated.

3. What causes the P0106 code to appear on a 2015 Ford F150?

Causes can include a faulty MAP sensor, damaged or corroded sensor connectors, vacuum leaks at the sensor or in the intake system, or electrical wiring issues affecting the sensor circuit.

4. How can I diagnose the P0106 code in a 2015 Ford F150?

Start by visually inspecting the MAP sensor and its connections for any visible damage or loose connections. Use a multimeter to check for proper voltage and ground at the sensor. Also, check for any vacuum leaks around the intake manifold and verify the integrity of the sensor's vacuum hose.

5. What are the steps to fix the P0106 code on a 2015 Ford F150?

Repairing this code may involve replacing the MAP sensor, repairing any damaged wires or connectors, fixing vacuum leaks in the intake system, or replacing the sensor's vacuum hose if it's found to be faulty.

6. Can I drive my 2015 Ford F150 with the P0106 code active?

While you might be able to drive with this code active, it's not recommended as it can lead to poor engine performance, increased fuel consumption, and potential damage to other engine components. Addressing the issue promptly is advised.

7. How important is it to address the P0106 code in a 2015 Ford F150?

It is quite important to address this issue as ignoring it can lead to more severe engine problems, decreased performance, and higher emissions, which might prevent the vehicle from passing emissions tests.

8. What tools are necessary to diagnose and repair the P0106 code on a 2015 Ford F150?

You'll need a digital multimeter, a vacuum gauge or smoke machine for detecting leaks, an OBD-II scanner to read and clear codes, and basic hand tools for removing and replacing components.

9. Could the P0106 code affect the transmission performance of my 2015 Ford F150?

Yes, the P0106 code can indirectly affect transmission performance. The engine control module uses the MAP sensor data to make fuel and air adjustments, which can influence how the transmission behaves. Poor engine performance might result in rough shifting or irregular transmission responses.