P0106 2011 Ford Fusion Code - Manifold Absolute Pressure/Barometric Pressure Sensor Range/Performance
Quick Answer
The Manifold Absolute Pressure (MAP) sensor measures the pressure inside the intake manifold. Common causes include Faulty Manifold Absolute Pressure (MAP) Sensor, Manifold Absolute Pressure Sensor harness is open or shorted, Manifold Absolute Pressure Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0106 2011 Ford Fusion indicates Manifold Absolute Pressure/Barometric Pressure Sensor Range/Performance.
- Common causes
- Common causes include Faulty Manifold Absolute Pressure (MAP) Sensor, Manifold Absolute Pressure Sensor harness is open or shorted, Manifold Absolute Pressure Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0106 2011 Ford Fusion Description
The MAP sensor wiring includes 3 circuits. The Engine Control Module (ECM) supplies a regulated 5 volts to the sensor on a 5 V reference circuit. The ECM supplies ground on a low reference circuit. The MAP sensor provides a signal voltage to the ECM, relative to the pressure changes, on the MAP sensor signal circuit. The ECM converts the signal voltage input to a pressure value.
Under normal operation the greatest pressure that can exist in the intake manifold is at ignition ON, engine OFF, which is equal to the BARO. The lowest manifold pressure occurs when the vehicle is idling or decelerating. The ECM monitors the MAP sensor signal for pressure outside of the normal range.
The Diagnostic Trouble Code (DTC) will be set when the ECM determines the MAP Sensor is stuck within the normal operating range. It accomplishes this by running 3 different models within the software to determine the values.
What are the Possible Causes of the DTC P0106 2011 Ford Fusion?
- Faulty Manifold Absolute Pressure (MAP) Sensor
- Manifold Absolute Pressure Sensor harness is open or shorted
- Manifold Absolute Pressure Sensor circuit poor electrical connection
- Faulty Engine Control Module (ECM)
How to Fix the DTC P0106 2011 Ford Fusion?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0106 2011 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0106 2011 Ford Fusion code?
Need more information on how to fix the P0106 2011 Ford Fusion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0106 2011 Ford Fusion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0106 2011 Ford Fusion Code
1. What are the common symptoms of OBDII code P0106 on a 2011 Ford Fusion?
- Common symptoms include a decrease in engine performance, rough idling, stalling, and possibly even poor fuel efficiency.
2. What does the OBDII code P0106 for a 2011 Ford Fusion indicate?
- The code P0106 indicates an issue with the Manifold Absolute Pressure (MAP) sensor or the Barometric Pressure (BARO) sensor, signaling a range/performance problem.
3. What are the possible causes of OBDII code P0106 on a 2011 Ford Fusion?
- Possible causes include a faulty MAP/BARO sensor, a vacuum leak in the intake manifold, a clogged air filter, or issues with the sensor wiring or connectors.
4. How can I diagnose the cause of OBDII code P0106 on my 2011 Ford Fusion?
- To diagnose the issue, you can visually inspect the sensor and its connections, check for vacuum leaks, test the sensor's voltage, and use a scan tool to monitor sensor data.
5. Can I still drive my 2011 Ford Fusion with OBDII code P0106?
- It is generally not recommended to drive the vehicle with a P0106 code, as it can lead to further engine damage and safety hazards. It's best to address the issue promptly.
6. How can I repair OBDII code P0106 on a 2011 Ford Fusion?
- Repair options include replacing the faulty MAP/BARO sensor, fixing any vacuum leaks, cleaning or replacing the air filter, and ensuring proper wiring connections.
7. Will resetting the OBDII code P0106 on my 2011 Ford Fusion make it go away?
- Resetting the code may temporarily clear the check engine light, but if the underlying issue causing P0106 is not addressed, the code is likely to return.
8. How much does it typically cost to repair OBDII code P0106 on a 2011 Ford Fusion?
- The cost of repair can vary depending on the cause of the issue and whether you do the repairs yourself or take the car to a mechanic. Costs may range from $50 to $300 or more.
9. Can a dirty air filter cause OBDII code P0106 on a 2011 Ford Fusion?
- Yes, a dirty or clogged air filter can disrupt airflow to the MAP sensor, potentially triggering code P0106. It's recommended to check and replace the air filter if necessary.
10. Is it safe to ignore OBDII code P0106 on a 2011 Ford Fusion?
- Ignoring OBDII code P0106 can lead to further engine problems and potentially affect the vehicle's performance and fuel efficiency. It is advisable to address the issue promptly.
Discuss the causes and fixes for P0106 2011 Ford Fusion OBDII Code
Code P0106 2011 Ford Fusion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
