P0105 Pontiac Code - Manifold Absolute Pressure/Barometric Pressure Circuit Malfunction
Quick Answer
The Manifold Absolute Pressure (MAP) sensor measures the pressure inside the intake manifold. Common causes include Faulty Manifold Absolute Pressure (MAP) Sensor, Manifold Absolute Pressure Sensor harness is open or shorted, Manifold Absolute Pressure Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0105 Pontiac indicates Manifold Absolute Pressure/Barometric Pressure Circuit Malfunction.
- Common causes
- Common causes include Faulty Manifold Absolute Pressure (MAP) Sensor, Manifold Absolute Pressure Sensor harness is open or shorted, Manifold Absolute Pressure Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0105 Pontiac Description
The MAP sensor wiring includes 3 circuits. The Engine Control Module (ECM) supplies a regulated 5 volts to the sensor on a 5 V reference circuit. The ECM supplies ground on a low reference circuit. The MAP sensor provides a signal voltage to the ECM, relative to the pressure changes, on the MAP sensor signal circuit. The ECM converts the signal voltage input to a pressure value.
Under normal operation the greatest pressure that can exist in the intake manifold is at ignition ON, engine OFF, which is equal to the BARO. The lowest manifold pressure occurs when the vehicle is idling or decelerating. The ECM monitors the MAP sensor signal for pressure outside of the normal range.
The Diagnostic Trouble Code (DTC) will be set when the ECM receives an excessively low or high voltage from the MAP Sensor.
What are the Possible Causes of the DTC P0105 Pontiac?
- Faulty Manifold Absolute Pressure (MAP) Sensor
- Manifold Absolute Pressure Sensor harness is open or shorted
- Manifold Absolute Pressure Sensor circuit poor electrical connection
- Faulty Engine Control Module (ECM)
How to Fix the DTC P0105 Pontiac?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0105 Pontiac code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0105 Pontiac code?
Need more information on how to fix the P0105 Pontiac code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0105 Pontiac code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0105 Pontiac Code
What does the P0105 code mean for a Pontiac?
The P0105 code indicates a problem with the Manifold Absolute Pressure (MAP) or Barometric Pressure circuit, which can affect engine performance and fuel efficiency.
What are the common symptoms of a P0105 code?
Symptoms include poor engine performance, rough idling, stalling, reduced fuel efficiency, and possibly an illuminated Check Engine Light.
What causes the P0105 code to appear?
Common causes include a faulty MAP sensor, damaged wiring or connectors, vacuum leaks, or issues with the engine control module (ECM).
Can a dirty MAP sensor trigger the P0105 code?
Yes, a dirty or contaminated MAP sensor can send incorrect readings to the ECM, causing the P0105 code.
How do I diagnose a P0105 code?
Start by inspecting the MAP sensor, wiring, and connectors for damage. Use a multimeter to check sensor voltage and a scan tool to monitor live data for irregular readings.
Can I drive my Pontiac with a P0105 code?
Driving with a P0105 code is possible but not recommended, as it can lead to poor performance, reduced fuel economy, and potential engine damage if left unresolved.
How do you fix a P0105 code on a Pontiac?
Common fixes include replacing the MAP sensor, repairing damaged wiring or connectors, checking for vacuum leaks, and updating or replacing the ECM if necessary.
Is a P0105 code related to other engine codes?
Yes, it can be associated with codes related to air intake, fuel system, or engine misfire, as these systems rely on accurate MAP sensor readings.
How much does it cost to repair a P0105 code?
Repair costs vary but typically range from $100 to $300, depending on whether the MAP sensor, wiring, or ECM needs replacement.
Can a faulty MAP sensor affect fuel economy?
Yes, a faulty MAP sensor can cause incorrect air-fuel mixture calculations, leading to decreased fuel efficiency and increased emissions.
Discuss the causes and fixes for P0105 Pontiac OBDII Code
Code P0105 Pontiac comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
