P0105 Hyundai Code - Manifold Absolute Pressure/Barometric Pressure Circuit Malfunction
Quick Answer
The Manifold Absolute Pressure (MAP) sensor measures the pressure inside the intake manifold. Common causes include Faulty Manifold Absolute Pressure (MAP) Sensor, Manifold Absolute Pressure Sensor harness is open or shorted, Manifold Absolute Pressure Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0105 Hyundai indicates Manifold Absolute Pressure/Barometric Pressure Circuit Malfunction.
- Common causes
- Common causes include Faulty Manifold Absolute Pressure (MAP) Sensor, Manifold Absolute Pressure Sensor harness is open or shorted, Manifold Absolute Pressure Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0105 Hyundai Description
The MAP sensor wiring includes 3 circuits. The Engine Control Module (ECM) supplies a regulated 5 volts to the sensor on a 5 V reference circuit. The ECM supplies ground on a low reference circuit. The MAP sensor provides a signal voltage to the ECM, relative to the pressure changes, on the MAP sensor signal circuit. The ECM converts the signal voltage input to a pressure value.
Under normal operation the greatest pressure that can exist in the intake manifold is at ignition ON, engine OFF, which is equal to the BARO. The lowest manifold pressure occurs when the vehicle is idling or decelerating. The ECM monitors the MAP sensor signal for pressure outside of the normal range.
The Diagnostic Trouble Code (DTC) will be set when the ECM receives an excessively low or high voltage from the MAP Sensor.
What are the Possible Causes of the DTC P0105 Hyundai?
- Faulty Manifold Absolute Pressure (MAP) Sensor
- Manifold Absolute Pressure Sensor harness is open or shorted
- Manifold Absolute Pressure Sensor circuit poor electrical connection
- Faulty Engine Control Module (ECM)
How to Fix the DTC P0105 Hyundai?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0105 Hyundai code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0105 Hyundai code?
Need more information on how to fix the P0105 Hyundai code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0105 Hyundai code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0105 Hyundai Code
What does the OBDII code P0105 mean on a Hyundai?
P0105 indicates a malfunction in the Manifold Absolute Pressure (MAP) sensor circuit or Barometric Pressure circuit, which affects engine performance.
What are the symptoms of code P0105 on a Hyundai?
Symptoms include poor acceleration, rough idling, reduced fuel efficiency, stalling, and possibly an illuminated check engine light.
What causes code P0105 on a Hyundai?
Common causes include a faulty MAP sensor, damaged wiring or connectors, vacuum leaks, or issues with the engine control module (ECM).
Can a dirty air filter cause P0105 on a Hyundai?
While unlikely, a severely clogged air filter can affect airflow and sensor readings, potentially contributing to this code.
How do you diagnose code P0105 on a Hyundai?
Diagnosing involves checking the MAP sensor, inspecting wiring and connectors for damage, testing the vacuum system, and verifying ECM operation.
Can you drive a Hyundai with code P0105?
Driving with P0105 is not recommended as it may lead to poor engine performance and potential damage over time.
How do you fix code P0105 on a Hyundai?
Repairs may include replacing the MAP sensor, repairing damaged wiring or connectors, fixing vacuum leaks, or reprogramming the ECM.
How much does it cost to repair code P0105 on a Hyundai?
Repair costs vary but typically range from $100 to $300 for sensor replacement, depending on parts and labor.
Can low battery voltage trigger code P0105 on a Hyundai?
Yes, low battery voltage can cause erratic sensor readings, potentially triggering this code.
Does code P0105 affect fuel efficiency on a Hyundai?
Yes, P0105 can cause inaccurate air-fuel mixture calculations, leading to reduced fuel efficiency.
Discuss the causes and fixes for P0105 Hyundai OBDII Code
Code P0105 Hyundai comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
