P0103 Pontiac Code - Mass or Volume Air Flow Circuit High Input
Quick Answer
The Mass Air Flow (MAF) sensor is integrated with the multifunction intake air sensor. Common causes include Dirty Air Filter, Dirty Mass Air Flow (MAF) Sensor, Intake air leaks. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0103 Pontiac indicates Mass or Volume Air Flow Circuit High Input.
- Common causes
- Common causes include Dirty Air Filter, Dirty Mass Air Flow (MAF) Sensor, Intake air leaks.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0103 Pontiac Description
The ECM applies 5 V to the MAF sensor on the MAF sensor signal circuit. The sensor uses voltage to produce a variable frequency signal based on the inlet air flow through the sensor bore. The signal varies with engine load and is displayed by the scan tool as Hertz (Hz) and grams per second (g/s). Ignition voltage and ground circuits are also supplied to the multifunction intake air sensor internal circuits for the Intake Air Temperature (IAT) sensor 2, Humidity sensor, and MAF sensor.
The Diagnostic Trouble Code (DTC) will be set when the ECM detects that the MAF Sensor Signal is greater than 14, 500 Hz (about 1233 g/s) for greater than 10 s.
What are the Possible Causes of the DTC P0103 Pontiac?
- Dirty Air Filter
- Dirty Mass Air Flow (MAF) Sensor
- Intake air leaks
- Faulty Mass Air Flow Sensor
- Mass Air Flow Sensor harness is open or shorted
- Mass Air Flow Sensor circuit poor electrical connection
How to Fix the DTC P0103 Pontiac?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0103 Pontiac code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0103 Pontiac code?
Need more information on how to fix the P0103 Pontiac code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0103 Pontiac code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0103 Pontiac Code
1. What are the common symptoms of OBDII code P0103 in a Pontiac?
- Common symptoms include poor engine performance, rough idling, stalling, and in some cases, the Check Engine light may illuminate.
2. What does the OBDII code P0103 in a Pontiac mean?
- The code P0103 indicates that there is a high input signal in the Mass or Volume Air Flow Circuit.
3. What are the possible causes of OBDII code P0103 in a Pontiac?
- The possible causes include a faulty mass air flow sensor, a dirty or contaminated air filter, a vacuum leak, or issues with the intake air temperature sensor.
4. How can I diagnose the OBDII code P0103 in my Pontiac?
- You can diagnose the code by inspecting the air filter, checking for vacuum leaks, testing the mass air flow sensor, and scanning for any other related trouble codes.
5. Can I drive my Pontiac with the OBDII code P0103?
- It is not recommended to drive your Pontiac with the code P0103 as it can lead to poor engine performance and potential damage if left unresolved.
6. How can I repair the OBDII code P0103 in my Pontiac?
- The repair process may involve cleaning or replacing the air filter, inspecting and fixing any vacuum leaks, testing and potentially replacing the mass air flow sensor, and resetting the trouble code.
7. Is it possible to reset the OBDII code P0103 in a Pontiac without fixing the underlying issue?
- While you can reset the code with an OBDII scanner, it is crucial to address the root cause of the problem to prevent the code from reappearing.
8. Can a faulty mass air flow sensor cause other issues besides triggering the OBDII code P0103?
- Yes, a faulty mass air flow sensor can cause issues such as poor fuel efficiency, lack of power, and difficulties starting the engine.
9. How much does it typically cost to repair the OBDII code P0103 in a Pontiac?
- The cost of repairing the code P0103 can vary depending on the specific issue, but it may range from $100 to $500, including parts and labor.
10. Are there any preventive measures to avoid encountering the OBDII code P0103 in a Pontiac?
- Regularly servicing your vehicle, keeping the air filter clean, and avoiding driving in dusty conditions can help prevent issues that may trigger the code P0103.
Discuss the causes and fixes for P0103 Pontiac OBDII Code
Code P0103 Pontiac comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
