P0103 Hummer Code - Mass or Volume Air Flow Circuit High Input
Quick Answer
The Mass Air Flow (MAF) sensor is integrated with the multifunction intake air sensor. Common causes include Dirty Air Filter, Dirty Mass Air Flow (MAF) Sensor, Intake air leaks. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0103 Hummer indicates Mass or Volume Air Flow Circuit High Input.
- Common causes
- Common causes include Dirty Air Filter, Dirty Mass Air Flow (MAF) Sensor, Intake air leaks.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0103 Hummer Description
The ECM applies 5 V to the MAF sensor on the MAF sensor signal circuit. The sensor uses voltage to produce a variable frequency signal based on the inlet air flow through the sensor bore. The signal varies with engine load and is displayed by the scan tool as Hertz (Hz) and grams per second (g/s). Ignition voltage and ground circuits are also supplied to the multifunction intake air sensor internal circuits for the Intake Air Temperature (IAT) sensor 2, Humidity sensor, and MAF sensor.
The Diagnostic Trouble Code (DTC) will be set when the ECM detects that the MAF Sensor Signal is greater than 14, 500 Hz (about 1233 g/s) for greater than 10 s.
What are the Possible Causes of the DTC P0103 Hummer?
- Dirty Air Filter
- Dirty Mass Air Flow (MAF) Sensor
- Intake air leaks
- Faulty Mass Air Flow Sensor
- Mass Air Flow Sensor harness is open or shorted
- Mass Air Flow Sensor circuit poor electrical connection
How to Fix the DTC P0103 Hummer?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0103 Hummer code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0103 Hummer code?
Need more information on how to fix the P0103 Hummer code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0103 Hummer code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0103 Hummer Code
1. What are common symptoms of OBDII code P0103 in a Hummer?
- Common symptoms include a decrease in fuel efficiency, rough idling, engine stalling, and a lack of power during acceleration.
2. What does the OBDII code P0103 "Mass or Volume Air Flow Circuit High Input" in a Hummer indicate?
- This code indicates that the mass airflow sensor (MAF) is detecting a higher than normal voltage input, which may result in incorrect air/fuel mixture ratios.
3. What are possible causes of OBDII code P0103 in a Hummer?
- Possible causes include a dirty or faulty mass airflow sensor, a vacuum leak, a clogged air filter, a wiring issue, or a faulty powertrain control module (PCM).
4. How can I diagnose the cause of OBDII code P0103 in my Hummer?
- You can start by checking the air filter, inspecting the MAF sensor for dirt or damage, checking for vacuum leaks, and testing the wiring and connections related to the MAF sensor.
5. Can I drive my Hummer with OBDII code P0103?
- It is not recommended to drive with this code as it can lead to poor engine performance and potential damage over time. It's best to address the issue promptly.
6. How can I repair OBDII code P0103 in a Hummer?
- Repair options may include cleaning or replacing the MAF sensor, fixing any vacuum leaks, replacing the air filter, checking and repairing any damaged wiring, or replacing the PCM if necessary.
7. Will resetting the trouble codes make OBDII code P0103 go away in my Hummer?
- Resetting the codes may temporarily clear the warning light, but if the underlying issue causing P0103 is not addressed, the code is likely to reappear.
8. Is it safe to continue driving my Hummer if the check engine light is on due to code P0103?
- It is not recommended to drive extensively with the check engine light on, as it indicates a potential issue that can affect the performance and efficiency of your vehicle.
9. Can a faulty mass airflow sensor cause other problems besides triggering OBDII code P0103 in a Hummer?
- Yes, a faulty mass airflow sensor can cause a variety of issues, including poor fuel economy, rough idling, engine stalling, and difficulty starting the engine.
10. How much does it typically cost to repair OBDII code P0103 in a Hummer?
- The cost of repairs can vary depending on the specific cause of the issue and whether you choose to DIY or take your vehicle to a mechanic. Costs can range from $50 for a simple fix like cleaning the MAF sensor to $300-$500 for more involved repairs or sensor replacement.
Discuss the causes and fixes for P0103 Hummer OBDII Code
Code P0103 Hummer comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
