P0103 2016 GMC Sierra Code - Mass or Volume Air Flow Circuit High Input
Quick Answer
The Mass Air Flow (MAF) sensor is integrated with the multifunction intake air sensor. Common causes include Dirty Air Filter, Dirty Mass Air Flow (MAF) Sensor, Intake air leaks. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0103 2016 GMC Sierra indicates Mass or Volume Air Flow Circuit High Input.
- Common causes
- Common causes include Dirty Air Filter, Dirty Mass Air Flow (MAF) Sensor, Intake air leaks.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0103 2016 GMC Sierra Description
The ECM applies 5 V to the MAF sensor on the MAF sensor signal circuit. The sensor uses voltage to produce a variable frequency signal based on the inlet air flow through the sensor bore. The signal varies with engine load and is displayed by the scan tool as Hertz (Hz) and grams per second (g/s). Ignition voltage and ground circuits are also supplied to the multifunction intake air sensor internal circuits for the Intake Air Temperature (IAT) sensor 2, Humidity sensor, and MAF sensor.
The Diagnostic Trouble Code (DTC) will be set when the ECM detects that the MAF Sensor Signal is greater than 14, 500 Hz (about 1233 g/s) for greater than 10 s.
What are the Possible Causes of the DTC P0103 2016 GMC Sierra?
- Dirty Air Filter
- Dirty Mass Air Flow (MAF) Sensor
- Intake air leaks
- Faulty Mass Air Flow Sensor
- Mass Air Flow Sensor harness is open or shorted
- Mass Air Flow Sensor circuit poor electrical connection
How to Fix the DTC P0103 2016 GMC Sierra?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0103 2016 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0103 2016 GMC Sierra code?
Need more information on how to fix the P0103 2016 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0103 2016 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0103 2016 GMC Sierra Code
What does the OBDII code P0103 mean on a 2016 GMC Sierra?
P0103 indicates that the Mass Air Flow (MAF) sensor is reporting a high input signal, meaning the airflow reading is outside the expected range.
What are the common symptoms of code P0103 in a 2016 GMC Sierra?
Symptoms may include poor engine performance, rough idling, reduced fuel efficiency, difficulty starting, or the Check Engine Light being illuminated.
What causes the P0103 code on a 2016 GMC Sierra?
Common causes include a faulty MAF sensor, damaged or dirty sensor elements, air intake leaks, wiring issues, or a malfunctioning PCM.
Can a dirty air filter trigger the P0103 code?
Yes, a clogged or dirty air filter can restrict airflow and affect the MAF sensor readings, potentially triggering the P0103 code.
How do I diagnose the P0103 code on my 2016 GMC Sierra?
Start by inspecting the MAF sensor for dirt or damage, check for air intake leaks, verify the wiring and connectors, and test the sensor output with a multimeter.
Can I drive my 2016 GMC Sierra with the P0103 code present?
Driving with the P0103 code is possible but not recommended due to potential engine performance issues and reduced fuel efficiency.
How do I fix the P0103 code on a 2016 GMC Sierra?
Common fixes include cleaning or replacing the MAF sensor, repairing damaged wiring, replacing the air filter, or addressing any intake system leaks.
Is it expensive to repair a P0103 code on a 2016 GMC Sierra?
Repair costs vary depending on the cause. Cleaning the MAF sensor or replacing an air filter is inexpensive, while replacing the sensor or fixing wiring may cost more.
Can a vacuum leak cause the P0103 code?
Yes, a vacuum leak can disrupt the air-fuel mixture and cause incorrect MAF sensor readings, leading to the P0103 code.
Do I need to reprogram the PCM after fixing the P0103 code?
In most cases, reprogramming the PCM is not necessary. However, clearing the code with an OBDII scanner after completing repairs is recommended.
Discuss the causes and fixes for P0103 2016 GMC Sierra OBDII Code
Code P0103 2016 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
