AutoCodes – Nissan – P0103 2013 Nissan Rogue

P0103 2013 Nissan Rogue Code - Mass Air Flow Sensor Circuit High Input

Quick Answer

The Mass Air Flow (MAF) sensor is placed in the stream of the intake air. Common causes include Dirty Air Filter, Dirty Mass Air Flow (MAF) Sensor, Intake air leaks. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0103 2013 Nissan Rogue indicates Mass Air Flow Sensor Circuit High Input.
Common causes: Common causes include Dirty Air Filter, Dirty Mass Air Flow (MAF) Sensor, Intake air leaks.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs Step-by-Step Diagnostic Guide My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 6,233

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on May 18, 2022

Description
Step-by-Step Diagnostic Guide
Possible Causes
How To Fix
Tech Notes ▶
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0103 2013 Nissan Rogue Description

The Mass Air Flow (MAF) sensor is placed in the stream of the intake air. It measures the intake flow rate by measuring a part of the entire intake flow. It consists of a hot film that is supplied with electric current from the Engine Control Module (ECM). The ECM controls the temperature of the hot film by a certain amount. The heat generated by the hot film is reduced as the intake air flows around it. The more air, the greater the heat loss. Therefore, the ECM must supply more electric current to maintain the temperature of the hot film as air flow increases. The ECM detects the air flow by means of this current change. The Diagnostic Trouble Code (DTC) will be set when the ECM detects that the MAF Sensor Signal is more than the factory specifications.

OBDII Code P0103 2013 Nissan Rogue - Mass Air Flow Sensor Circuit High Input - AutoCodes.com — P0103 2013 Nissan Rogue Code - Mass Air Flow Sensor Circuit High Input

What does this mean?

What are the Possible Causes of the DTC P0103 2013 Nissan Rogue?

Dirty Air Filter
Dirty Mass Air Flow (MAF) Sensor
Intake air leaks
Faulty Mass Air Flow Sensor
Mass Air Flow Sensor harness is open or shorted
Mass Air Flow Sensor circuit poor electrical connection

How to Fix the DTC P0103 2013 Nissan Rogue?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

Before replacing the Mass Air Flow (MAF) Sensor, try replacing the air filter and cleaning the Mass Air Flow Sensor with low compress air or Mass Air Flow Sensor Cleaner. Reset code and drive vehicle. If the code comes back, you must replace the Mass Air Flow Sensor to fix the problem.

User Submitted Video

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0103 2013 Nissan Rogue code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0103 2013 Nissan Rogue code?

Need more information on how to fix the P0103 2013 Nissan Rogue code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0103 2013 Nissan Rogue code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0103 2013 Nissan Rogue Code

1. What are the common symptoms of OBDII code P0103 (Mass Air Flow Sensor Circuit High Input) on a 2013 Nissan Rogue?

- Common symptoms include engine stalling, rough idling, hesitation or jerking during acceleration, and a decrease in fuel efficiency.

2. What are the possible causes of the P0103 code on a 2013 Nissan Rogue?

- The code P0103 is often triggered by a faulty mass air flow sensor, a vacuum leak, a dirty or contaminated air filter, or issues with the wiring or connectors in the sensor circuit.

3. How can I diagnose the P0103 code on my 2013 Nissan Rogue?

- Diagnosing the P0103 code involves checking the mass air flow sensor for any visible damage or contamination, inspecting the air filter and intake system for debris, and testing the sensor's circuitry for proper voltage and continuity.

4. Can a dirty air filter cause the P0103 code on a 2013 Nissan Rogue?

- Yes, a dirty or clogged air filter can disrupt the airflow readings detected by the mass air flow sensor, leading to incorrect voltage signals and triggering the P0103 code.

5. How can I repair the P0103 code on my 2013 Nissan Rogue?

- Repairing the P0103 code may involve cleaning or replacing the mass air flow sensor, replacing a dirty air filter, fixing any vacuum leaks, and ensuring the wiring and connectors in the sensor circuit are intact.

6. Is it safe to continue driving my 2013 Nissan Rogue with the P0103 code?

- It is not recommended to drive the vehicle with the P0103 code present, as it can lead to poor engine performance, potential damage to other components, and decreased fuel efficiency.

7. Will resetting the OBDII system clear the P0103 code on a 2013 Nissan Rogue?

- Resetting the OBDII system may temporarily clear the code, but if the underlying issue causing the P0103 code is not addressed, the code is likely to reappear.

8. Can I fix the P0103 code on my 2013 Nissan Rogue myself?

- Depending on your skills and knowledge, you may be able to address some causes of the P0103 code yourself, such as cleaning the mass air flow sensor or replacing the air filter. However, more complex issues may require professional diagnosis and repair.

9. How much does it typically cost to repair the P0103 code on a 2013 Nissan Rogue?

- The cost of repairing the P0103 code on a 2013 Nissan Rogue can vary depending on the exact cause of the issue and whether you choose to do the repairs yourself or take the vehicle to a mechanic. Costs may range from a few dollars for a new air filter to a few hundred dollars for a new mass air flow sensor.

10. Can extreme weather conditions affect the mass air flow sensor and trigger the P0103 code on a 2013 Nissan Rogue?

- Yes, extreme temperature conditions, humidity, or exposure to water can potentially damage the mass air flow sensor or lead to erroneous readings, which may trigger the P0103 code.