AutoCodes – Ford – P0102 2020 Ford F150

P0102 2020 Ford F150 Code - Mass Or Volume Air Flow Sensor 'A' Circuit Low Input

Quick Answer

The Mass Airflow (MAF) Sensor uses a hot wire sensing element to measure the amount of air entering the engine. Common causes include Dirty Air Filter, Faulty Mass Airflow (MAF) 'A' Sensor, Mass Airflow 'A' Sensor harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0102 2020 Ford F150 indicates Mass Or Volume Air Flow Sensor 'A' Circuit Low Input.
Common causes: Common causes include Dirty Air Filter, Faulty Mass Airflow (MAF) 'A' Sensor, Mass Airflow 'A' Sensor harness is open or shorted.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs Step-by-Step Diagnostic Guide My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 272

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Sep 21, 2023

Description
Step-by-Step Diagnostic Guide
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0102 2020 Ford F150 Description

The Mass Airflow (MAF) Sensor uses a hot wire sensing element to measure the amount of air entering the engine. The air passing over the hot wire causes it to cool. This hot wire is maintained at 200°C (392°F) above the ambient temperature as measured by a constant cold wire. The current required to maintain the temperature of the hot wire is proportional to the mass airflow. The MAF Sensor then outputs a signal to the Powertrain Control Module (PCM) proportional to the intake air mass. The PCM calculates the required fuel injector pulse width in order to provide the desired air to fuel ratio. The MAF sensor is located near the air cleaner assembly. Most MAF sensors have an integrated Intake Air Temperature (IAT) sensor. This Diagnostic Trouble Code (DTC) will be set when during Key ON, Engine Running (KOER), the Mass Airflow Sensor output changes below a minimum calibrated limit for greater than a set period of time.

OBDII Code P0102 2020 Ford F150 - Mass Or Volume Air Flow Sensor 'A' Circuit Low Input - AutoCodes.com — P0102 2020 Ford F150 Code - Mass Or Volume Air Flow Sensor 'A' Circuit Low Input

What does this mean?

What are the Possible Causes of the DTC P0102 2020 Ford F150?

Dirty Air Filter
Faulty Mass Airflow (MAF) 'A' Sensor
Mass Airflow 'A' Sensor harness is open or shorted
Mass Airflow 'A' Sensor circuit poor electrical connection

How to Fix the DTC P0102 2020 Ford F150?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

Before replacing the Mass Air Flow (MAF) Sensor, try replacing the air filter and cleaning the Mass Air Flow Sensor with low-compressed air or a Mass Air Flow Sensor Cleaner. Reset the code and drive the vehicle. If the code comes back, you must replace the Mass Air Flow Sensor to fix the problem.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0102 2020 Ford F150 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0102 2020 Ford F150 code?

Need more information on how to fix the P0102 2020 Ford F150 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0102 2020 Ford F150 code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0102 2020 Ford F150 Code

What does the OBDII code P0102 mean for a 2020 Ford F150?

P0102 indicates a low input signal from the Mass or Volume Air Flow Sensor 'A', which measures the amount of air entering the engine.

What are common symptoms of the P0102 code?

Common symptoms include poor engine performance, reduced fuel efficiency, rough idling, and illuminated check engine light.

What could cause the P0102 code to trigger?

Potential causes include a faulty mass air flow sensor, damaged wiring or connectors, vacuum leaks, or issues with the engine control module (ECM).

How can I diagnose the P0102 code?

Start by visually inspecting the mass air flow sensor and its wiring for damage, then check for vacuum leaks, and finally test the sensor's voltage and resistance using a multimeter.

Is it safe to drive my Ford F150 with the P0102 code?

While it may be drivable, it is not recommended to continue driving as it can lead to further engine performance issues and potential damage.

What are some common repair tips for fixing P0102?

Repair tips include cleaning or replacing the mass air flow sensor, repairing any damaged wiring or connectors, and ensuring there are no vacuum leaks present.

Can I clear the P0102 code without fixing the issue?

Yes, you can clear the code using an OBDII scanner, but if the underlying issue is not resolved, the code will likely return.

How much does it typically cost to repair a P0102 code?

Repair costs can vary widely, but replacing a mass air flow sensor can range from $100 to $300, including parts and labor.

Will replacing the mass air flow sensor always fix the P0102 code?

Not necessarily; while replacing the sensor often resolves the issue, itâ€™s important to ensure there are no other underlying problems, such as wiring issues or vacuum leaks.