P0102 2011 Nissan Rogue Code - Mass or Volume Air Flow Circuit Low Input
Quick Answer
The Mass Air Flow (MAF) sensor is placed in the stream of the intake air. Common causes include Dirty Air Filter, Dirty Mass Air Flow (MAF) Sensor, Intake air leaks. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0102 2011 Nissan Rogue indicates Mass or Volume Air Flow Circuit Low Input.
- Common causes
- Common causes include Dirty Air Filter, Dirty Mass Air Flow (MAF) Sensor, Intake air leaks.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0102 2011 Nissan Rogue Description
What are the Possible Causes of the DTC P0102 2011 Nissan Rogue?
- Dirty Air Filter
- Dirty Mass Air Flow (MAF) Sensor
- Intake air leaks
- Faulty Mass Air Flow (MAF) Sensor
- Mass Air Flow (MAF) Sensor harness is open or shorted
- Mass Air Flow (MAF) Sensor circuit poor electrical connection
How to Fix the DTC P0102 2011 Nissan Rogue?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
User Submitted Video
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0102 2011 Nissan Rogue code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0102 2011 Nissan Rogue code?
Need more information on how to fix the P0102 2011 Nissan Rogue code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0102 2011 Nissan Rogue code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0102 2011 Nissan Rogue Code
1. What are the common symptoms of OBDII code P0102 in a 2011 Nissan Rogue?
- Common symptoms include poor engine performance, reduced fuel efficiency, rough idling, and stalling.
2. What does the OBDII code P0102 indicate in a 2011 Nissan Rogue?
- The code P0102 signifies a low input in the mass or volume air flow circuit of the vehicle.
3. What are the possible causes of OBDII code P0102 in a 2011 Nissan Rogue?
- Potential causes include a faulty mass air flow (MAF) sensor, damaged or dirty air filter, vacuum leaks, or issues with the wiring or connectors.
4. How can I diagnose the OBDII code P0102 in my 2011 Nissan Rogue?
- Diagnose the code by checking the MAF sensor for dirt or damage, inspecting the air filter, searching for vacuum leaks, and testing the wiring and connectors.
5. Can a dirty air filter trigger the OBDII code P0102 in a 2011 Nissan Rogue?
- Yes, a dirty air filter can disrupt the airflow and cause the MAF sensor to detect lower than normal air volume, triggering the P0102 code.
6. How can I repair the OBDII code P0102 in my 2011 Nissan Rogue?
- Repair options include cleaning or replacing the MAF sensor, replacing the air filter, fixing any vacuum leaks, and ensuring all wiring and connectors are in good condition.
7. Is it safe to continue driving with the OBDII code P0102 in a 2011 Nissan Rogue?
- It is not recommended to continue driving with the P0102 code as it can lead to further engine issues and potential damage if left unresolved.
8. Will resetting the OBDII code P0102 in a 2011 Nissan Rogue make it go away permanently?
- Resetting the code may temporarily clear the warning light, but if the underlying issue is not fixed, the code is likely to reappear.
9. Can a malfunctioning MAF sensor cause other OBDII codes besides P0102 in a 2011 Nissan Rogue?
- Yes, a faulty MAF sensor can trigger other codes related to air/fuel mixture, such as P0101 (MAF sensor circuit range/performance problem).
10. How often should the MAF sensor be inspected in a 2011 Nissan Rogue to prevent OBDII code P0102?
- It is recommended to inspect the MAF sensor during regular maintenance intervals or whenever you experience symptoms of reduced engine performance.
Discuss the causes and fixes for P0102 2011 Nissan Rogue OBDII Code
Code P0102 2011 Nissan Rogue comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
