AutoCodes – Nissan – P0102 2010 Nissan Rogue

P0102 2010 Nissan Rogue Code - Mass or Volume Air Flow Circuit Low Input

Quick Answer

The Mass Air Flow (MAF) sensor is placed in the stream of the intake air. Common causes include Dirty Air Filter, Dirty Mass Air Flow (MAF) Sensor, Intake air leaks. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0102 2010 Nissan Rogue indicates Mass or Volume Air Flow Circuit Low Input.
Common causes: Common causes include Dirty Air Filter, Dirty Mass Air Flow (MAF) Sensor, Intake air leaks.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs Step-by-Step Diagnostic Guide My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 5,624

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on May 18, 2022

Description
Step-by-Step Diagnostic Guide
Possible Causes
How To Fix
Tech Notes ▶
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0102 2010 Nissan Rogue Description

The Mass Air Flow (MAF) sensor is placed in the stream of the intake air. It measures the intake flow rate by measuring a part of the entire intake flow. It consists of a hot film that is supplied with electric current from the Engine Control Module (ECM). The ECM controls the temperature of the hot film by a certain amount. The heat generated by the hot film is reduced as the intake air flows around it. The more air, the greater the heat loss. Therefore, the ECM must supply more electric current to maintain the temperature of the hot film as air flow increases. The ECM detects the air flow by means of this current change. The Diagnostic Trouble Code (DTC) will be set when the ECM detects that the MAF Sensor Signal is less than the factory specifications.

OBDII Code P0102 2010 Nissan Rogue - Mass or Volume Air Flow Circuit Low Input - AutoCodes.com — P0102 2010 Nissan Rogue Code - Mass or Volume Air Flow Circuit Low Input

What does this mean?

What are the Possible Causes of the DTC P0102 2010 Nissan Rogue?

Dirty Air Filter
Dirty Mass Air Flow (MAF) Sensor
Intake air leaks
Faulty Mass Air Flow (MAF) Sensor
Mass Air Flow (MAF) Sensor harness is open or shorted
Mass Air Flow (MAF) Sensor circuit poor electrical connection

How to Fix the DTC P0102 2010 Nissan Rogue?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

Before replacing the Mass Air Flow (MAF) Sensor, try replacing the air filter and cleaning the Mass Air Flow Sensor with low compress air or Mass Air Flow Sensor Cleaner. Reset code and drive vehicle. If the code comes back, you must replace the Mass Air Flow Sensor to fix the problem.

User Submitted Video

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0102 2010 Nissan Rogue code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0102 2010 Nissan Rogue code?

Need more information on how to fix the P0102 2010 Nissan Rogue code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0102 2010 Nissan Rogue code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0102 2010 Nissan Rogue Code

1. What are the common symptoms of OBDII code P0102 on a 2010 Nissan Rogue?

The common symptoms of code P0102 include poor acceleration, rough idling, stalling, decreased fuel efficiency, and the Check Engine Light illuminating.

2. What does the OBDII code P0102 Mass or Volume Air Flow Circuit Low Input mean for a 2010 Nissan Rogue?

Code P0102 indicates that the Mass Air Flow (MAF) sensor is detecting a lower than expected voltage from the air intake system, potentially leading to engine performance issues.

3. What are the possible causes of OBDII code P0102 on a 2010 Nissan Rogue?

Common causes of code P0102 include a faulty MAF sensor, dirty or clogged air filter, vacuum leaks, intake air leaks, wiring issues, or a malfunctioning PCM (Powertrain Control Module).

4. How can I diagnose the cause of OBDII code P0102 on my 2010 Nissan Rogue?

To diagnose code P0102, you can start by inspecting the MAF sensor, checking the air filter, inspecting for vacuum leaks, testing the wiring connections, and using a scan tool to monitor MAF sensor data.

5. Can I drive my 2010 Nissan Rogue with OBDII code P0102?

It is not recommended to drive your vehicle with code P0102 as it can lead to poor engine performance and potential damage. It is best to address the issue promptly to avoid further complications.

6. How do I repair OBDII code P0102 on a 2010 Nissan Rogue?

Repairing code P0102 may involve cleaning or replacing the MAF sensor, replacing the air filter, fixing any vacuum or intake leaks, repairing damaged wiring, or reprogramming the PCM if necessary.

7. Can a dirty air filter cause OBDII code P0102 on a 2010 Nissan Rogue?

Yes, a dirty or clogged air filter can restrict airflow to the MAF sensor, leading to improper readings and triggering code P0102. It is recommended to check and replace the air filter if needed.

8. Will resetting the Check Engine Light resolve OBDII code P0102 on a 2010 Nissan Rogue?

Resetting the Check Engine Light may temporarily clear the code, but if the underlying issue causing code P0102 is not addressed, the light is likely to return. It's important to diagnose and fix the root cause.

9. How much does it cost to repair OBDII code P0102 on a 2010 Nissan Rogue?

The cost of repairing code P0102 can vary depending on the cause of the issue and whether you perform the repairs yourself or take it to a mechanic. Costs may range from a simple air filter replacement to a MAF sensor replacement.

10. Can I prevent OBDII code P0102 from occurring on my 2010 Nissan Rogue?

To help prevent code P0102, it's important to regularly maintain your vehicle by replacing the air filter, cleaning the MAF sensor, checking for vacuum leaks, and addressing any engine performance issues promptly. Regular vehicle inspections can also help catch potential problems early.