AutoCodes – Honda – P0102 2009 Honda Accord

P0102 2009 Honda Accord Code - Mass Air Flow Sensor Circuit Low Voltage

Quick Answer

The Mass Air Flow (MAF) sensor is placed in the stream of the intake air. Common causes include Faulty mass air flow sensor, Intake air leaks, Dirty mass air flow sensor. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0102 2009 Honda Accord indicates Mass Air Flow Sensor Circuit Low Voltage.
Common causes: Common causes include Faulty mass air flow sensor, Intake air leaks, Dirty mass air flow sensor.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs Step-by-Step Diagnostic Guide My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 10,983

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on May 18, 2022

Description
Step-by-Step Diagnostic Guide
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0102 2009 Honda Accord Description

The Mass Air Flow (MAF) sensor is placed in the stream of the intake air. It measures the intake flow rate by measuring a part of the entire intake flow. It consists of a hot film that is supplied with electric current from the Engine Control Module (ECM). The ECM controls the temperature of the hot film by a certain amount. The heat generated by the hot film is reduced as the intake air flows around it. The more air, the greater the heat loss. Therefore, the ECM must supply more electric current to maintain the temperature of the hot film as air flow increases. The ECM detects the air flow by means of this current change. The Diagnostic Trouble Code (DTC) will be set when the ECM detects that the MAF Sensor Signal is less than the factory specifications.

OBDII Code P0102 2009 Honda Accord - Mass Air Flow Sensor Circuit Low Voltage - AutoCodes.com — P0102 2009 Honda Accord Code - Mass Air Flow Sensor Circuit Low Voltage

What does this mean?

What are the Possible Causes of the DTC P0102 2009 Honda Accord?

Faulty mass air flow sensor
Intake air leaks
Dirty mass air flow sensor
Dirty mass air filter
Mass air flow sensor harness is open or shorted
Mass air flow sensor circuit poor electrical connection

How to Fix the DTC P0102 2009 Honda Accord?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

Before replacing the Mass Air Flow (MAF) Sensor, try replacing the air filter and cleaning the Mass Air Flow Sensor with low compress air or Mass Air Flow Sensor Cleaner. Reset code and drive vehicle. If the code comes back, you must replace the Mass Air Flow Sensor to fix the problem.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0102 2009 Honda Accord code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0102 2009 Honda Accord code?

Need more information on how to fix the P0102 2009 Honda Accord code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0102 2009 Honda Accord code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0102 2009 Honda Accord Code

1. What are the common symptoms of OBDII code P0102 in a 2009 Honda Accord?

The common symptoms include poor acceleration, rough idling, stalling, reduced fuel efficiency, and the vehicle may not start.

2. What does the OBDII code P0102 indicate in a 2009 Honda Accord?

OBDII code P0102 indicates an issue with the Mass Air Flow (MAF) sensor circuit, specifically low voltage being detected.

3. What are the possible causes of OBDII code P0102 in a 2009 Honda Accord?

Possible causes include a faulty MAF sensor, damaged or disconnected wiring in the MAF sensor circuit, a clogged air filter, or a vacuum leak.

4. How can I diagnose the cause of OBDII code P0102 in my 2009 Honda Accord?

You can use a multimeter to test the voltage output of the MAF sensor, visually inspect the wiring for any damage, check the air filter for clogs, and perform a smoke test to identify any vacuum leaks.

5. Can a dirty air filter cause OBDII code P0102 in a 2009 Honda Accord?

Yes, a dirty air filter can restrict airflow to the MAF sensor, leading to inaccurate readings and triggering code P0102.

6. How can I repair OBDII code P0102 in my 2009 Honda Accord?

Repair options include cleaning or replacing the air filter, checking and repairing any damaged wiring, replacing the MAF sensor if faulty, and fixing any vacuum leaks.

7. Is it safe to continue driving with OBDII code P0102 in a 2009 Honda Accord?

It is not recommended to continue driving with code P0102, as it can lead to engine performance issues and potentially cause further damage if left unresolved.

8. Can a bad MAF sensor cause other OBDII codes to appear in a 2009 Honda Accord?

Yes, a faulty MAF sensor can cause other codes related to fuel mixture, engine performance, and emissions to appear in the vehicle's diagnostic system.

9. How much does it typically cost to repair OBDII code P0102 in a 2009 Honda Accord?

The cost of repairing code P0102 can vary depending on the exact cause, but it may range from $100 to $300 for parts and labor.

10. Is it possible to reset OBDII code P0102 in a 2009 Honda Accord without fixing the underlying issue?

Resetting the code without fixing the underlying issue will only temporarily turn off the Check Engine Light, but the problem will likely reoccur until properly diagnosed and repaired.