AutoCodes – Nissan – P0102 2002 Nissan Altima Sedan

P0102 2002 Nissan Altima Sedan Code - Mass or Volume Air Flow Circuit Low Input

Quick Answer

The Mass Air Flow (MAF) sensor is placed in the stream of the intake air. Common causes include Dirty Air Filter, Dirty Mass Air Flow (MAF) Sensor, Intake air leaks. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0102 2002 Nissan Altima Sedan indicates Mass or Volume Air Flow Circuit Low Input.
Common causes: Common causes include Dirty Air Filter, Dirty Mass Air Flow (MAF) Sensor, Intake air leaks.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs Step-by-Step Diagnostic Guide My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 7,225

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on May 18, 2022

Description
Step-by-Step Diagnostic Guide
Possible Causes
How To Fix
Tech Notes ▶
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0102 2002 Nissan Altima Sedan Description

The Mass Air Flow (MAF) sensor is placed in the stream of the intake air. It measures the intake flow rate by measuring a part of the entire intake flow. It consists of a hot film that is supplied with electric current from the Engine Control Module (ECM). The ECM controls the temperature of the hot film by a certain amount. The heat generated by the hot film is reduced as the intake air flows around it. The more air, the greater the heat loss. Therefore, the ECM must supply more electric current to maintain the temperature of the hot film as air flow increases. The ECM detects the air flow by means of this current change. The Diagnostic Trouble Code (DTC) will be set when the ECM detects that the MAF Sensor Signal is less than the factory specifications.

OBDII Code P0102 2002 Nissan Altima Sedan - Mass or Volume Air Flow Circuit Low Input - AutoCodes.com — P0102 2002 Nissan Altima Sedan Code - Mass or Volume Air Flow Circuit Low Input

What does this mean?

What are the Possible Causes of the DTC P0102 2002 Nissan Altima Sedan?

Dirty Air Filter
Dirty Mass Air Flow (MAF) Sensor
Intake air leaks
Faulty Mass Air Flow Sensor
Mass Air Flow Sensor harness is open or shorted
Mass Air Flow Sensor circuit poor electrical connection

How to Fix the DTC P0102 2002 Nissan Altima Sedan?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

Before replacing the Mass Air Flow (MAF) Sensor, try replacing the air filter and cleaning the Mass Air Flow Sensor with low compress air or Mass Air Flow Sensor Cleaner. Reset code and drive vehicle. If the code comes back, you must replace the Mass Air Flow Sensor to fix the problem.

User Submitted Video

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0102 2002 Nissan Altima Sedan code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0102 2002 Nissan Altima Sedan code?

Need more information on how to fix the P0102 2002 Nissan Altima Sedan code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0102 2002 Nissan Altima Sedan code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0102 2002 Nissan Altima Sedan Code

1. What are the common symptoms of OBDII code P0102 on a 2002 Nissan Altima Sedan?

- Common symptoms include a decrease in fuel efficiency, rough idling, stalling, and a noticeable decrease in engine performance.

2. What are the possible causes of the mass or volume air flow circuit low input code (P0102) on a 2002 Nissan Altima Sedan?

- The code P0102 may be triggered by a faulty mass air flow sensor, a vacuum leak, a dirty air filter, or issues with the electrical circuitry.

3. How can I diagnose the P0102 code on my 2002 Nissan Altima Sedan?

- You can diagnose the code by checking the mass air flow sensor for dirt or debris, inspecting the air filter, looking for vacuum leaks, and testing the sensor's electrical connections.

4. Can a dirty air filter cause the P0102 code on a 2002 Nissan Altima Sedan?

- Yes, a dirty air filter can restrict airflow to the mass air flow sensor, leading to incorrect readings and triggering the P0102 code.

5. How can I repair the mass or volume air flow circuit low input code on my 2002 Nissan Altima Sedan?

- Repair options include cleaning or replacing the mass air flow sensor, replacing the air filter, fixing any vacuum leaks, and addressing any issues with the sensor's wiring.

6. Is it safe to continue driving my 2002 Nissan Altima Sedan with the P0102 code?

- It is not recommended to drive your vehicle with the P0102 code as it can lead to poor engine performance and potential damage over time.

7. Can a faulty oxygen sensor trigger the P0102 code on a 2002 Nissan Altima Sedan?

- While it is possible for a faulty oxygen sensor to indirectly impact air flow readings, the P0102 code is primarily related to issues with the mass air flow sensor or its circuit.

8. How much does it typically cost to repair the P0102 code on a 2002 Nissan Altima Sedan?

- The cost of repairing the P0102 code can vary depending on the specific issue, but it may range from $100 to $500, including parts and labor.

9. Will resetting the OBDII code temporarily fix the issue with the mass air flow circuit on my 2002 Nissan Altima Sedan?

- Resetting the code may temporarily clear the warning light, but it will not fix the underlying issue causing the P0102 code to appear.

10. Can I perform the repair for the P0102 code on my 2002 Nissan Altima Sedan myself, or should I seek professional help?

- Depending on your mechanical skills and tools available, you may be able to address some causes of the P0102 code yourself, but for more complex issues, it is advisable to seek professional assistance.