AutoCodes – Infiniti – P0101 2012 Infiniti G37_sedan

P0101 2012 Infiniti G37_sedan Code - Mass Air Flow Circuit Range/Performance

Quick Answer

The Mass Air Flow (MAF) sensor is placed in the stream of the intake air. Common causes include Dirty Air Filter, Dirty Mass Air Flow (MAF) Sensor, Intake air leaks. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0101 2012 Infiniti G37_sedan indicates Mass Air Flow Circuit Range/Performance.
Common causes: Common causes include Dirty Air Filter, Dirty Mass Air Flow (MAF) Sensor, Intake air leaks.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs Step-by-Step Diagnostic Guide My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 4,164

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on May 18, 2022

Description
Step-by-Step Diagnostic Guide
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0101 2012 Infiniti G37_sedan Description

The Mass Air Flow (MAF) sensor is placed in the stream of the intake air. It measures the intake flow rate by measuring a part of the entire intake flow. It consists of a hot film that is supplied with electric current from the Engine Control Module (ECM). The ECM controls the temperature of the hot film by a certain amount. The heat generated by the hot film is reduced as the intake air flows around it. The more air, the greater the heat loss. Therefore, the ECM must supply more electric current to maintain the temperature of the hot film as air flow increases. The ECM detects the air flow by means of this current change. The Diagnostic Trouble Code (DTC) will be set when the ECM detects a high or low voltage from the sensor under normal driving conditions.

OBDII Code P0101 2012 Infiniti G37_sedan - Mass Air Flow Circuit Range/Performance - AutoCodes.com — P0101 2012 Infiniti G37_sedan Code - Mass Air Flow Circuit Range/Performance

What does this mean?

What are the Possible Causes of the DTC P0101 2012 Infiniti G37_sedan?

Dirty Air Filter
Dirty Mass Air Flow (MAF) Sensor
Intake air leaks
Faulty Mass Air Flow Sensor
Mass Air Flow Sensor harness is open or shorted
Mass Air Flow Sensor circuit poor electrical connection

How to Fix the DTC P0101 2012 Infiniti G37_sedan?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

Before replacing the Mass Air Flow (MAF) Sensor, try replacing the air filter and cleaning the Mass Air Flow Sensor with low compress air or Mass Air Flow Sensor Cleaner. Reset code and drive vehicle. If the code comes back, you must replace the Mass Air Flow Sensor to fix the problem.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0101 2012 Infiniti G37_sedan code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0101 2012 Infiniti G37_sedan code?

Need more information on how to fix the P0101 2012 Infiniti G37_sedan code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0101 2012 Infiniti G37_sedan code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0101 2012 Infiniti G37_sedan Code

1. What are the common symptoms of OBDII code P0101 on a 2012 Infiniti G37 sedan?

The common symptoms of P0101 on a 2012 Infiniti G37 sedan include poor engine performance, rough idling, stalling, decreased fuel efficiency, and the check engine light coming on.

2. What are the possible causes of OBDII code P0101 on a 2012 Infiniti G37 sedan?

Potential causes of P0101 on a 2012 Infiniti G37 sedan include a dirty or faulty mass air flow (MAF) sensor, vacuum leaks, wiring issues, intake air leaks, or a clogged air filter.

3. How can I diagnose the P0101 code on my 2012 Infiniti G37 sedan?

To diagnose the P0101 code, you can start by inspecting the MAF sensor for dirt or damage, checking for vacuum leaks, inspecting the air filter, and ensuring all wiring connections are secure.

4. What are some repair tips for resolving OBDII code P0101 on a 2012 Infiniti G37 sedan?

Repair tips for P0101 on a 2012 Infiniti G37 sedan may include cleaning or replacing the MAF sensor, fixing any vacuum leaks, repairing damaged wiring, replacing the air filter, and resetting the check engine light.

5. Can I drive my 2012 Infiniti G37 sedan with an active P0101 trouble code?

While it may be possible to drive with the P0101 code present, it is not recommended as it can lead to further engine damage and decreased performance. It's best to address the issue promptly.

6. How much does it typically cost to repair OBDII code P0101 on a 2012 Infiniti G37 sedan?

The cost of repairing P0101 on a 2012 Infiniti G37 sedan can vary based on the specific cause of the issue. Costs may range from a simple DIY fix to a few hundred dollars if professional help is needed.

7. Is it safe to reset the OBDII code P0101 on my 2012 Infiniti G37 sedan using a code reader?

Yes, it is safe to reset the P0101 code using an OBDII code reader after addressing the underlying issue. However, if the problem persists, it's important to diagnose and repair it to prevent further issues.

8. How often does the mass air flow sensor need to be replaced in a 2012 Infiniti G37 sedan?

The mass air flow sensor in a 2012 Infiniti G37 sedan typically does not need frequent replacement unless it fails or becomes dirty. Regular maintenance and cleaning can help prolong its lifespan.

9. Can a clogged air filter cause OBDII code P0101 on a 2012 Infiniti G37 sedan?

Yes, a clogged air filter can restrict airflow to the mass air flow sensor, leading to inaccurate readings and triggering the P0101 trouble code on a 2012 Infiniti G37 sedan.

10. Will driving with a faulty MAF sensor affect the overall performance of my 2012 Infiniti G37 sedan?

Driving with a faulty mass air flow sensor can negatively impact the performance of your 2012 Infiniti G37 sedan, leading to issues like poor fuel efficiency, rough idling, and potential engine stalling.