AutoCodesNissan – P0101 2011 Nissan Rogue

P0101 2011 Nissan Rogue Code - Mass Air Flow Circuit Range/Performance

Quick Answer

The Mass Air Flow (MAF) sensor is placed in the stream of the intake air. Common causes include Dirty Air Filter, Dirty Mass Air Flow (MAF) Sensor, Intake air leaks. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P0101 2011 Nissan Rogue indicates Mass Air Flow Circuit Range/Performance.
Common causes
Common causes include Dirty Air Filter, Dirty Mass Air Flow (MAF) Sensor, Intake air leaks.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 32,513
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on May 18, 2022
💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0101 2011 Nissan Rogue Description

The Mass Air Flow (MAF) sensor is placed in the stream of the intake air. It measures the intake flow rate by measuring a part of the entire intake flow. It consists of a hot film that is supplied with electric current from the Engine Control Module (ECM). The ECM controls the temperature of the hot film by a certain amount. The heat generated by the hot film is reduced as the intake air flows around it. The more air, the greater the heat loss. Therefore, the ECM must supply more electric current to maintain the temperature of the hot film as air flow increases. The ECM detects the air flow by means of this current change. The Diagnostic Trouble Code (DTC) will be set when the ECM detects a high or low voltage from the sensor under normal driving conditions.
OBDII Code P0101 2011 Nissan Rogue - Mass Air Flow Circuit Range/Performance - AutoCodes.com
P0101 2011 Nissan Rogue Code - Mass Air Flow Circuit Range/Performance

What are the Possible Causes of the DTC P0101 2011 Nissan Rogue?

  • Dirty Air Filter
  • Dirty Mass Air Flow (MAF) Sensor
  • Intake air leaks
  • Faulty Mass Air Flow Sensor
  • Mass Air Flow Sensor harness is open or shorted
  • Mass Air Flow Sensor circuit poor electrical connection

How to Fix the DTC P0101 2011 Nissan Rogue?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

Code Tech Notes

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0101 2011 Nissan Rogue code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0101 2011 Nissan Rogue code?

Need more information on how to fix the P0101 2011 Nissan Rogue code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0101 2011 Nissan Rogue code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0101 2011 Nissan Rogue Code

1. What are the common symptoms of the P0101 OBDII code on a 2011 Nissan Rogue?

The common symptoms of the P0101 code on a 2011 Nissan Rogue include rough idling, decreased fuel efficiency, stalling, and hesitation during acceleration.

2. What does the P0101 OBDII code indicate on a 2011 Nissan Rogue?

The P0101 code on a 2011 Nissan Rogue indicates a problem with the Mass Air Flow (MAF) sensor circuit, specifically that the voltage signal is out of the expected range.

3. What are the possible causes of the P0101 OBDII code on a 2011 Nissan Rogue?

Possible causes of the P0101 code on a 2011 Nissan Rogue include a faulty MAF sensor, a dirty or contaminated MAF sensor, a vacuum leak, a clogged air filter, or issues with the wiring or connectors in the MAF sensor circuit.

4. How can I diagnose the P0101 OBDII code on a 2011 Nissan Rogue?

To diagnose the P0101 code on a 2011 Nissan Rogue, you can start by inspecting the MAF sensor, checking for any visible damage or contamination. You can also check for any disconnected or damaged wires in the MAF sensor circuit.

5. Can a dirty air filter cause the P0101 OBDII code on a 2011 Nissan Rogue?

Yes, a dirty or clogged air filter can restrict airflow to the MAF sensor, causing incorrect readings and triggering the P0101 code on a 2011 Nissan Rogue.

6. How can I repair the P0101 OBDII code on a 2011 Nissan Rogue?

To repair the P0101 code on a 2011 Nissan Rogue, you may need to clean or replace the MAF sensor, clean or replace the air filter, fix any vacuum leaks, or repair any damaged wiring in the MAF sensor circuit.

7. Can driving with the P0101 OBDII code on a 2011 Nissan Rogue cause further damage?

Continuing to drive with the P0101 code on a 2011 Nissan Rogue can potentially lead to decreased engine performance, reduced fuel efficiency, and further damage to the engine components over time.

8. How much does it typically cost to fix the P0101 OBDII code on a 2011 Nissan Rogue?

The cost to fix the P0101 code on a 2011 Nissan Rogue can vary depending on the specific cause of the issue. Costs may range from around $50 for a new air filter to a few hundred dollars for a new MAF sensor or professional diagnostic and repair services.

9. Can I reset the P0101 OBDII code on a 2011 Nissan Rogue by disconnecting the battery?

While disconnecting the battery may temporarily clear the P0101 code on a 2011 Nissan Rogue, it is not a permanent solution. The underlying issue causing the code will need to be diagnosed and repaired to prevent it from reoccurring.

10. Is it safe to drive my 2011 Nissan Rogue with the P0101 OBDII code present?

It is generally not recommended to drive your 2011 Nissan Rogue with the P0101 code present, as it can lead to performance issues and potential damage to the engine. It is best to address the issue promptly to avoid further complications.

Discuss the causes and fixes for P0101 2011 Nissan Rogue OBDII Code

  • Replaced sensor 3 times, still a problem

  • Did you use new factory sensors? Check harness ground wires. Poor ground connection could cause a premature sensor failure

  • I Replaced sensor 2 times, still a problem,replaced air filter. harness, even the air box was changed. still have the P0101 code. after a few days... Help! what can I do. This problem is costing me a fortune.

  • hi. I also have a 2011 rogue with the same problem. I also changed the sensor and air filter. if you figured it out,can you please share.thanks.

  • hi did you figure it out. I'm having the same issues.

  • Can you please explain why a Factory sensor is needed? Why not a third party MAF sensor? I'm interested in eveyone's final resolution. I have a 2011 Rogue - filter replaced, MAF sensor twice, NISSAN did a computer update for $150. I know I will never buy another nissan.

  • From my experience, some aftermarket MAF do not meet the factory specifications. At my shop we had many problems with aftermarket MAFs. For that reason, when the problem is the MAF, I always recommend factory replacement part.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play