AutoCodes – Infiniti – P0101 2011 Infiniti G37_sedan

P0101 2011 Infiniti G37_sedan Code - Mass Air Flow Circuit Range/Performance

Quick Answer

The Mass Air Flow (MAF) sensor is placed in the stream of the intake air. Common causes include Dirty Air Filter, Dirty Mass Air Flow (MAF) Sensor, Intake air leaks. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0101 2011 Infiniti G37_sedan indicates Mass Air Flow Circuit Range/Performance.
Common causes: Common causes include Dirty Air Filter, Dirty Mass Air Flow (MAF) Sensor, Intake air leaks.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs Step-by-Step Diagnostic Guide My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 3,178

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on May 18, 2022

Description
Step-by-Step Diagnostic Guide
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0101 2011 Infiniti G37_sedan Description

The Mass Air Flow (MAF) sensor is placed in the stream of the intake air. It measures the intake flow rate by measuring a part of the entire intake flow. It consists of a hot film that is supplied with electric current from the Engine Control Module (ECM). The ECM controls the temperature of the hot film by a certain amount. The heat generated by the hot film is reduced as the intake air flows around it. The more air, the greater the heat loss. Therefore, the ECM must supply more electric current to maintain the temperature of the hot film as air flow increases. The ECM detects the air flow by means of this current change. The Diagnostic Trouble Code (DTC) will be set when the ECM detects a high or low voltage from the sensor under normal driving conditions.

OBDII Code P0101 2011 Infiniti G37_sedan - Mass Air Flow Circuit Range/Performance - AutoCodes.com — P0101 2011 Infiniti G37_sedan Code - Mass Air Flow Circuit Range/Performance

What does this mean?

What are the Possible Causes of the DTC P0101 2011 Infiniti G37_sedan?

Dirty Air Filter
Dirty Mass Air Flow (MAF) Sensor
Intake air leaks
Faulty Mass Air Flow Sensor
Mass Air Flow Sensor harness is open or shorted
Mass Air Flow Sensor circuit poor electrical connection

How to Fix the DTC P0101 2011 Infiniti G37_sedan?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

Before replacing the Mass Air Flow (MAF) Sensor, try replacing the air filter and cleaning the Mass Air Flow Sensor with low compress air or Mass Air Flow Sensor Cleaner. Reset code and drive vehicle. If the code comes back, you must replace the Mass Air Flow Sensor to fix the problem.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0101 2011 Infiniti G37_sedan code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0101 2011 Infiniti G37_sedan code?

Need more information on how to fix the P0101 2011 Infiniti G37_sedan code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0101 2011 Infiniti G37_sedan code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0101 2011 Infiniti G37_sedan Code

1. What are the common symptoms of OBDII code P0101 on a 2011 Infiniti G37 sedan?

- Common symptoms include rough idling, poor acceleration, stalling, decreased fuel efficiency, and the illumination of the check engine light.

2. What are the possible causes of OBDII code P0101 on a 2011 Infiniti G37 sedan?

- The code P0101 typically indicates an issue with the mass airflow sensor (MAF), such as a dirty or faulty MAF sensor, air leaks in the intake system, or a clogged air filter.

3. How can I diagnose the cause of OBDII code P0101 on my 2011 Infiniti G37 sedan?

- You can start by inspecting the MAF sensor, checking for any visible damage or contamination. Additionally, you can inspect the air intake system for leaks and ensure the air filter is clean.

4. Can a dirty air filter trigger OBDII code P0101 on a 2011 Infiniti G37 sedan?

- Yes, a dirty air filter can restrict airflow to the MAF sensor, causing incorrect readings and triggering the P0101 code.

5. Is it safe to drive my 2011 Infiniti G37 sedan with OBDII code P0101?

- It is not recommended to drive with the P0101 code illuminated as it can lead to poor engine performance and potential damage over time. It's best to address the issue promptly.

6. How can I repair OBDII code P0101 on my 2011 Infiniti G37 sedan?

- Depending on the cause, you may need to clean or replace the MAF sensor, fix any air leaks in the intake system, replace the air filter, or reset the code after addressing the underlying issue.

7. Can a loose or disconnected vacuum hose cause OBDII code P0101 on a 2011 Infiniti G37 sedan?

- Yes, a loose or disconnected vacuum hose can disrupt the airflow readings and trigger the P0101 code. It's important to inspect all hoses for proper connections.

8. How much does it typically cost to repair OBDII code P0101 on a 2011 Infiniti G37 sedan?

- The cost of repairing the P0101 code can vary depending on the specific issue. Costs may range from replacing a dirty air filter or cleaning the MAF sensor to more extensive repairs if the sensor needs replacement.

9. Will resetting the OBDII code P0101 on my 2011 Infiniti G37 sedan make it go away permanently?

- Resetting the code without addressing the underlying issue will not resolve the problem permanently. It's crucial to diagnose and fix the root cause to prevent the code from reappearing.

10. Can extreme weather conditions affect the occurrence of OBDII code P0101 on a 2011 Infiniti G37 sedan?

- Yes, extreme weather conditions such as very hot or cold temperatures can sometimes impact the performance of the MAF sensor and lead to the triggering of the P0101 code.