AutoCodes – Nissan – P0101 2010 Nissan Rogue

P0101 2010 Nissan Rogue Code - Mass Air Flow Circuit Range/Performance

Quick Answer

The Mass Air Flow (MAF) sensor is placed in the stream of the intake air. Common causes include Dirty Air Filter, Dirty Mass Air Flow (MAF) Sensor, Intake air leaks. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0101 2010 Nissan Rogue indicates Mass Air Flow Circuit Range/Performance.
Common causes: Common causes include Dirty Air Filter, Dirty Mass Air Flow (MAF) Sensor, Intake air leaks.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs Step-by-Step Diagnostic Guide My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 8,434

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on May 18, 2022

Description
Step-by-Step Diagnostic Guide
Possible Causes
How To Fix
Tech Notes ▶
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0101 2010 Nissan Rogue Description

The Mass Air Flow (MAF) sensor is placed in the stream of the intake air. It measures the intake flow rate by measuring a part of the entire intake flow. It consists of a hot film that is supplied with electric current from the Engine Control Module (ECM). The ECM controls the temperature of the hot film by a certain amount. The heat generated by the hot film is reduced as the intake air flows around it. The more air, the greater the heat loss. Therefore, the ECM must supply more electric current to maintain the temperature of the hot film as air flow increases. The ECM detects the air flow by means of this current change. The Diagnostic Trouble Code (DTC) will be set when the ECM detects a high or low voltage from the sensor under normal driving conditions.

OBDII Code P0101 2010 Nissan Rogue - Mass Air Flow Circuit Range/Performance - AutoCodes.com — P0101 2010 Nissan Rogue Code - Mass Air Flow Circuit Range/Performance

What does this mean?

What are the Possible Causes of the DTC P0101 2010 Nissan Rogue?

Dirty Air Filter
Dirty Mass Air Flow (MAF) Sensor
Intake air leaks
Faulty Mass Air Flow Sensor
Mass Air Flow Sensor harness is open or shorted
Mass Air Flow Sensor circuit poor electrical connection

How to Fix the DTC P0101 2010 Nissan Rogue?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

Before replacing the Mass Air Flow (MAF) Sensor, try replacing the air filter and cleaning the Mass Air Flow Sensor with low compress air or Mass Air Flow Sensor Cleaner. Reset code and drive vehicle. If the code comes back, you must replace the Mass Air Flow Sensor to fix the problem.

User Submitted Video

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0101 2010 Nissan Rogue code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0101 2010 Nissan Rogue code?

Need more information on how to fix the P0101 2010 Nissan Rogue code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0101 2010 Nissan Rogue code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0101 2010 Nissan Rogue Code

1. What does the OBDII code P0101 for a 2010 Nissan Rogue indicate?

The code P0101 on a 2010 Nissan Rogue refers to an issue with the Mass Air Flow (MAF) sensor circuit, indicating a range/performance problem.

2. What are the common symptoms of a P0101 code in a Nissan Rogue?

Common symptoms of a P0101 code in a 2010 Nissan Rogue may include poor fuel economy, rough idling, hesitation or stalling during acceleration, and a noticeable decrease in engine performance.

3. What are some possible causes of a P0101 code in a 2010 Nissan Rogue?

Potential causes of a P0101 code in a 2010 Nissan Rogue include a faulty MAF sensor, a dirty or contaminated MAF sensor, a vacuum leak, a clogged air filter, or issues with the wiring or connectors related to the MAF sensor.

4. How can I diagnose a P0101 code in my 2010 Nissan Rogue?

Diagnosing a P0101 code in a 2010 Nissan Rogue typically involves inspecting the MAF sensor and its wiring, checking for vacuum leaks, verifying air filter cleanliness, and using a scan tool to monitor MAF sensor data for anomalies.

5. Can a dirty air filter cause a P0101 code in a 2010 Nissan Rogue?

Yes, a dirty or clogged air filter can disrupt the airflow to the MAF sensor, potentially triggering a P0101 code in a 2010 Nissan Rogue. It's recommended to check and replace the air filter if necessary as part of troubleshooting.

6. How can I repair a P0101 code in my 2010 Nissan Rogue?

Repairing a P0101 code in a 2010 Nissan Rogue may involve cleaning or replacing the MAF sensor, fixing any vacuum leaks, ensuring the air filter is clean, and addressing any wiring or connector issues related to the MAF sensor.

7. Can I drive my 2010 Nissan Rogue with a P0101 code?

While it may be possible to drive your 2010 Nissan Rogue with a P0101 code, it's not recommended as it can lead to decreased performance, reduced fuel efficiency, and potential further damage to the engine over time. It's best to address the issue promptly.

8. Is it safe to clear a P0101 code in my 2010 Nissan Rogue with a scan tool?

Clearing a P0101 code in a 2010 Nissan Rogue using a scan tool may temporarily turn off the Check Engine Light, but it won't fix the underlying issue causing the code. It's crucial to diagnose and repair the problem to prevent future occurrences.

9. Will a P0101 code in a 2010 Nissan Rogue cause the vehicle to fail an emissions test?

A P0101 code in a 2010 Nissan Rogue can potentially cause the vehicle to fail an emissions test due to the impact on engine performance and emissions control systems. It's advisable to address the issue before undergoing an emissions test.

10. How much does it typically cost to repair a P0101 code in a 2010 Nissan Rogue?

The cost of repairing a P0101 code in a 2010 Nissan Rogue can vary depending on the root cause of the issue and whether you choose to address it yourself or take it to a mechanic. Costs may range from a few dollars for cleaning the MAF sensor to a few hundred dollars for a sensor replacement or more extensive repairs.