AutoCodes – Ford – P0100 2019 Ford F150

P0100 2019 Ford F150 Code - Mass Or Volume Air Flow Sensor 'A' Circuit

Quick Answer

The Mass Airflow (MAF) Sensor uses a hot wire sensing element to measure the amount of air entering the engine. Common causes include Dirty Air Filter, Faulty Mass Airflow (MAF) 'A' Sensor, Mass Airflow 'A' Sensor harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0100 2019 Ford F150 indicates Mass Or Volume Air Flow Sensor 'A' Circuit.
Common causes: Common causes include Dirty Air Filter, Faulty Mass Airflow (MAF) 'A' Sensor, Mass Airflow 'A' Sensor harness is open or shorted.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs Step-by-Step Diagnostic Guide My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 254

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Sep 21, 2023

Description
Step-by-Step Diagnostic Guide
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0100 2019 Ford F150 Description

The Mass Airflow (MAF) Sensor uses a hot wire sensing element to measure the amount of air entering the engine. The air passing over the hot wire causes it to cool. This hot wire is maintained at 200°C (392°F) above the ambient temperature as measured by a constant cold wire. The current required to maintain the temperature of the hot wire is proportional to the mass airflow. The MAF Sensor then outputs a signal to the Powertrain Control Module (PCM) proportional to the intake air mass. The PCM calculates the required fuel injector pulse width in order to provide the desired air to fuel ratio. The MAF sensor is located near the air cleaner assembly. Most MAF sensors have an integrated Intake Air Temperature (IAT) sensor. This Diagnostic Trouble Code (DTC) will be set when the Mass Airflow Sensor frequency changes below a minimum calibrated limit for greater than 0.5 seconds.

OBDII Code P0100 2019 Ford F150 - Mass Or Volume Air Flow Sensor 'A' Circuit - AutoCodes.com — P0100 2019 Ford F150 Code - Mass Or Volume Air Flow Sensor 'A' Circuit

What does this mean?

What are the Possible Causes of the DTC P0100 2019 Ford F150?

Dirty Air Filter
Faulty Mass Airflow (MAF) 'A' Sensor
Mass Airflow 'A' Sensor harness is open or shorted
Mass Airflow 'A' Sensor circuit poor electrical connection

How to Fix the DTC P0100 2019 Ford F150?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

Before replacing the Mass Air Flow (MAF) Sensor, try replacing the air filter and cleaning the Mass Air Flow Sensor with low-compressed air or a Mass Air Flow Sensor Cleaner. Reset the code and drive the vehicle. If the code comes back, you must replace the Mass Air Flow Sensor to fix the problem.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0100 2019 Ford F150 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0100 2019 Ford F150 code?

Need more information on how to fix the P0100 2019 Ford F150 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0100 2019 Ford F150 code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0100 2019 Ford F150 Code

1. What does the OBDII code P0100 indicate on a 2019 Ford F150?

The P0100 code indicates a problem with the Mass Air Flow (MAF) sensor circuit, suggesting that the circuit has malfunctioned.

2. What are common symptoms of code P0100 in a 2019 Ford F150?

Symptoms include rough idling, stalling, difficulty starting, a decrease in fuel efficiency, and the engine may run rich or lean.

3. What causes the P0100 code to appear on a 2019 Ford F150?

Causes can include a faulty MAF sensor, dirty or contaminated MAF sensor elements, issues with the wiring harness connected to the MAF sensor, or leaks in the air intake system.

4. How can I fix the P0100 code on a 2019 Ford F150?

Repairs might involve cleaning or replacing the MAF sensor, repairing or replacing damaged wiring or connectors, and checking for and sealing any leaks in the air intake system.

5. Is it safe to drive a 2019 Ford F150 with a P0100 code?

While you might be able to drive for a short distance, it is advisable to address the issue as soon as possible to avoid potential engine damage or performance issues.

6. How do I troubleshoot the MAF sensor on my 2019 Ford F150 when I get a P0100 code?

Start by inspecting the MAF sensor and its connections for any signs of damage or corrosion. Test the sensorâ€™s voltage and ground supply using a multimeter, and consider cleaning the sensor with a specialized cleaner.

7. Can a dirty air filter cause a P0100 code on a 2019 Ford F150?

Yes, a dirty air filter can restrict air flow to the MAF sensor, leading to inaccurate readings and potentially triggering this code.

8. What tools are needed to diagnose the P0100 code on a 2019 Ford F150?

A scan tool is essential for reading and clearing the code, and a multimeter can help in checking the MAF sensorâ€™s functionality. Additionally, a repair manual for the specific vehicle model might be very helpful.

9. How much does it typically cost to fix a P0100 code on a 2019 Ford F150?

The cost can vary widely depending on the specific repair needed, but MAF sensor replacement typically ranges from $200 to $400 including parts and labor.