P0098 2009 Ford Fusion Code - Intake Air Temperature Sensor 2 Circuit High Voltage
Quick Answer
The Intake Air Temperature (IAT) sensor contains a semiconductor device which changes the resistance based on the temperature (a thermistor). Common causes include Faulty Intake Air Temperature Sensor, Faulty Map Senor/Intake Air Temperature Sensor 2, Intake Air Temperature sensor harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0098 2009 Ford Fusion indicates Intake Air Temperature Sensor 2 Circuit High Voltage.
- Common causes
- Common causes include Faulty Intake Air Temperature Sensor, Faulty Map Senor/Intake Air Temperature Sensor 2, Intake Air Temperature sensor harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0098 2009 Ford Fusion Description
What are the Possible Causes of the DTC P0098 2009 Ford Fusion?
- Faulty Intake Air Temperature Sensor
- Faulty Map Senor/Intake Air Temperature Sensor 2
- Intake Air Temperature sensor harness is open or shorted
- Intake Air Temperature sensor circuit poor electrical connection
How to Fix the DTC P0098 2009 Ford Fusion?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0098 2009 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0098 2009 Ford Fusion code?
Need more information on how to fix the P0098 2009 Ford Fusion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0098 2009 Ford Fusion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0098 2009 Ford Fusion Code
1. What are the common symptoms of OBDII code P0098 on a 2009 Ford Fusion?
- Common symptoms include engine stalling, rough idling, decrease in fuel efficiency, and the Check Engine Light illuminating.
2. What does the OBDII code P0098 in a 2009 Ford Fusion indicate?
- This code indicates an issue with the Intake Air Temperature Sensor 2 Circuit High Voltage.
3. What are the possible causes of OBDII code P0098 on a 2009 Ford Fusion?
- Possible causes include a faulty intake air temperature sensor, damaged wiring or connectors, or a problem with the engine control module.
4. How can I diagnose the cause of OBDII code P0098 on my 2009 Ford Fusion?
- To diagnose the issue, you can use a diagnostic scanner to read the code, inspect the intake air temperature sensor and its wiring, and perform continuity tests to check for any faults.
5. Can I continue to drive my 2009 Ford Fusion with OBDII code P0098?
- It is not recommended to drive the vehicle with this code as it can lead to poor engine performance and potential damage if left unresolved.
6. How can I repair OBDII code P0098 on my 2009 Ford Fusion?
- The repair typically involves replacing the faulty intake air temperature sensor, repairing any damaged wiring or connectors, and clearing the trouble code.
7. Is it possible to reset OBDII code P0098 on a 2009 Ford Fusion without fixing the issue?
- While you can clear the code using a diagnostic scanner, it is important to address the underlying problem to prevent further issues.
8. Are there any DIY tips for troubleshooting OBDII code P0098 on a 2009 Ford Fusion?
- DIY tips include checking the sensor's wiring for damage, ensuring proper sensor connection, and consulting the vehicle's repair manual for specific troubleshooting steps.
9. How much does it typically cost to repair OBDII code P0098 on a 2009 Ford Fusion at a mechanic?
- The cost of repair can vary depending on the labor rates and parts needed, but it may range from $100 to $300, including parts and labor.
10. Can a faulty intake air temperature sensor cause other problems in a 2009 Ford Fusion besides triggering code P0098?
- Yes, a faulty sensor can cause issues like poor engine performance, rough idling, and decreased fuel efficiency in addition to triggering the specific OBDII code P0098.
Discuss the causes and fixes for P0098 2009 Ford Fusion OBDII Code
Code P0098 2009 Ford Fusion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
