P0097 Mitsubishi Code - Intake Air Temperature Sensor 2 Circuit Low Input
Quick Answer
The Intake Air Temperature (IAT) sensor contains a semiconductor device which changes the resistance based on the temperature (a thermistor). Common causes include Faulty Intake Air Temperature sensor, Intake Air Temperature sensor harness is open or shorted, Intake Air Temperature sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0097 Mitsubishi indicates Intake Air Temperature Sensor 2 Circuit Low Input.
- Common causes
- Common causes include Faulty Intake Air Temperature sensor, Intake Air Temperature sensor harness is open or shorted, Intake Air Temperature sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0097 Mitsubishi Description
What are the Possible Causes of the DTC P0097 Mitsubishi?
- Faulty Intake Air Temperature sensor
- Intake Air Temperature sensor harness is open or shorted
- Intake Air Temperature sensor circuit poor electrical connection
How to Fix the DTC P0097 Mitsubishi?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0097 Mitsubishi code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0097 Mitsubishi code?
Need more information on how to fix the P0097 Mitsubishi code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0097 Mitsubishi code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0097 Mitsubishi Code
1. What does the OBDII code P0097 mean on a Mitsubishi?
P0097 indicates a "Low Input" issue in the Intake Air Temperature (IAT) Sensor 2 circuit, meaning the sensor is sending a voltage signal lower than the expected range to the engine control module (ECM).
2. What are the symptoms of a P0097 code on a Mitsubishi?
Common symptoms include poor fuel efficiency, rough idling, reduced engine performance, or the Check Engine Light turning on.
3. What causes the P0097 code on a Mitsubishi?
Possible causes include a faulty IAT Sensor 2, damaged wiring or connectors in the sensor circuit, a short to ground, or a malfunctioning ECM.
4. Can I still drive my Mitsubishi with a P0097 code?
While the vehicle may still be drivable, ignoring the code can lead to decreased engine performance and fuel efficiency. It’s best to address the issue promptly.
5. Where is the Intake Air Temperature Sensor 2 located in a Mitsubishi?
IAT Sensor 2 is typically located in the intake air duct or near the throttle body, depending on the model.
6. How do I diagnose the P0097 code on a Mitsubishi?
Diagnose the code by visually inspecting the IAT Sensor 2, its wiring, and connectors for damage. Use a scan tool to check sensor readings and compare them to manufacturer specifications.
7. How do I fix the P0097 code on a Mitsubishi?
Common fixes include repairing or replacing damaged wiring, cleaning or replacing the IAT Sensor 2, and ensuring proper connections in the circuit.
8. How much does it cost to repair a P0097 code on a Mitsubishi?
Repair costs can vary, but replacing an IAT sensor typically costs $50-$150 for parts, with additional labor charges if performed by a professional.
9. Can a dirty air filter trigger the P0097 code on a Mitsubishi?
A dirty air filter alone is unlikely to trigger P0097, but it could indirectly affect airflow and sensor performance, contributing to related issues.
10. Will clearing the P0097 code fix the problem permanently?
Clearing the code may turn off the Check Engine Light temporarily, but the underlying issue must be resolved to prevent the code from returning.
Discuss the causes and fixes for P0097 Mitsubishi OBDII Code
Code P0097 Mitsubishi comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
