P0096 2020 Ford F150 Code - Intake Air Temperature Sensor 2 Circuit Range/Performance Bank 1
Quick Answer
The Intake Air Temperature (IAT) Sensor is a thermistor device in which resistance changes with temperature. Common causes include Faulty Intake Air Temperature 2 (IAT2) Sensor, Intake Air Temperature 2 Sensor harness is open or shorted, Intake Air Temperature 2 Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0096 2020 Ford F150 indicates Intake Air Temperature Sensor 2 Circuit Range/Performance Bank 1.
- Common causes
- Common causes include Faulty Intake Air Temperature 2 (IAT2) Sensor, Intake Air Temperature 2 Sensor harness is open or shorted, Intake Air Temperature 2 Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0096 2020 Ford F150 Description
Thermistor-type sensors are considered passive sensors. A passive sensor is connected to a voltage divider network so that varying the resistance of the passive sensor causes a variation in total current flow. The voltage that is dropped across a fixed resistor in a series with the sensor resistor determines the voltage signal at the PCM. This voltage signal is equal to the reference voltage minus the voltage drop across the fixed resistor.
The IAT sensor provides air temperature information to the PCM. The PCM uses the air temperature information as a correction factor in the calculation of fuel, spark, and airflow.
The IAT sensor provides a quicker temperature change response time than the Engine Coolant Temperature (ECT) or Cylinder Head Temperature (CHT) sensor.
Currently, there are 2 types of IAT sensors used, a stand-alone and an integrated type. Both types function the same, however, the integrated type is incorporated into the Mass Air Flow (MAF) Sensor, the Manifold Absolute Pressure and Temperature (MAPT) Sensor, or the Turbocharger Intake Pressure and Temperature (TCIPT) Sensor instead of being a stand-alone sensor.
The Intake Air Temperature 2 (IAT2) Sensor is typically located near the intake manifold and is used to measure the intake manifold temperature. The PCM uses this information to determine the air charge and provide input for various engine control functions. The IAT2 sensor may be integrated with the Manifold Absolute Pressure (MAP) Sensor.
This Diagnostic Trouble Code (DTC) is set when the IAT2 Sensor value does not correlate with the Charge Air Cooler Temperature (CACT) Sensor value or the IAT Sensor value at ignition ON after a calibrated soak period (typically 6 to 8 hours). This DTC also sets if the IAT2 Sensor value exceeds the maximum calibrated temperature threshold while driving.
What are the Possible Causes of the DTC P0096 2020 Ford F150?
- Faulty Intake Air Temperature 2 (IAT2) Sensor
- Intake Air Temperature 2 Sensor harness is open or shorted
- Intake Air Temperature 2 Sensor circuit poor electrical connection
How to Fix the DTC P0096 2020 Ford F150?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0096 2020 Ford F150 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0096 2020 Ford F150 code?
Need more information on how to fix the P0096 2020 Ford F150 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0096 2020 Ford F150 code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0096 2020 Ford F150 Code
What does the OBDII code P0096 mean for a 2020 Ford F150?
The OBDII code P0096 indicates that there is a problem with the Intake Air Temperature (IAT) Sensor 2 circuit range or performance for Bank 1, meaning the sensor's readings are outside the expected range.
What symptoms might indicate a P0096 code?
Common symptoms include poor engine performance, reduced fuel efficiency, rough idling, and the check engine light being illuminated on the dashboard.
What could cause the P0096 code to trigger?
Possible causes include a faulty IAT sensor 2, damaged wiring or connectors in the sensor circuit, a malfunctioning Engine Control Module (ECM), or issues with the intake air system.
How can I diagnose the P0096 code?
You can start by using an OBDII scanner to confirm the code, inspect the IAT sensor and its wiring for damage, check for any vacuum leaks, and verify that the sensor is receiving the correct voltage.
Is it safe to drive with a P0096 code?
While it may be safe to drive short distances, it's best to have the issue diagnosed and repaired promptly to avoid potential engine performance problems and further damage.
What are some common repair tips for fixing a P0096 code?
Repair tips include replacing the faulty IAT sensor, repairing any damaged wiring or connectors, ensuring all electrical connections are secure, and checking for vacuum leaks in the intake system.
How much does it typically cost to fix a P0096 code?
The cost can vary widely depending on the underlying issue; however, replacing an IAT sensor typically ranges from $100 to $300, including parts and labor.
Can I clear the P0096 code without fixing the problem?
Yes, you can clear the code using an OBDII scanner, but if the underlying issue is not resolved, the code will likely return after the vehicle is driven.
What should I do if the P0096 code keeps coming back after repairs?
If the code persists, further diagnosis is needed to check for intermittent wiring issues, verify the functionality of the ECM, or investigate other related components in the intake system.
Discuss the causes and fixes for P0096 2020 Ford F150 OBDII Code
Code P0096 2020 Ford F150 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
