P0096 2019 Ford F150 Code - Intake Air Temperature Sensor 2 Circuit Range/Performance Bank 1
Quick Answer
The Intake Air Temperature (IAT) Sensor is a thermistor device in which resistance changes with temperature. Common causes include Faulty Intake Air Temperature 2 (IAT2) Sensor, Intake Air Temperature 2 Sensor harness is open or shorted, Intake Air Temperature 2 Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0096 2019 Ford F150 indicates Intake Air Temperature Sensor 2 Circuit Range/Performance Bank 1.
- Common causes
- Common causes include Faulty Intake Air Temperature 2 (IAT2) Sensor, Intake Air Temperature 2 Sensor harness is open or shorted, Intake Air Temperature 2 Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0096 2019 Ford F150 Description
Thermistor-type sensors are considered passive sensors. A passive sensor is connected to a voltage divider network so that varying the resistance of the passive sensor causes a variation in total current flow. The voltage that is dropped across a fixed resistor in a series with the sensor resistor determines the voltage signal at the PCM. This voltage signal is equal to the reference voltage minus the voltage drop across the fixed resistor.
The IAT sensor provides air temperature information to the PCM. The PCM uses the air temperature information as a correction factor in the calculation of fuel, spark, and airflow.
The IAT sensor provides a quicker temperature change response time than the Engine Coolant Temperature (ECT) or Cylinder Head Temperature (CHT) sensor.
Currently, there are 2 types of IAT sensors used, a stand-alone and an integrated type. Both types function the same, however, the integrated type is incorporated into the Mass Air Flow (MAF) Sensor, the Manifold Absolute Pressure and Temperature (MAPT) Sensor, or the Turbocharger Intake Pressure and Temperature (TCIPT) Sensor instead of being a stand-alone sensor.
The Intake Air Temperature 2 (IAT2) Sensor is typically located near the intake manifold and is used to measure the intake manifold temperature. The PCM uses this information to determine the air charge and provide input for various engine control functions. The IAT2 sensor may be integrated with the Manifold Absolute Pressure (MAP) Sensor.
This Diagnostic Trouble Code (DTC) is set when the IAT2 Sensor value does not correlate with the Charge Air Cooler Temperature (CACT) Sensor value or the IAT Sensor value at ignition ON after a calibrated soak period (typically 6 to 8 hours). This DTC also sets if the IAT2 Sensor value exceeds the maximum calibrated temperature threshold while driving.
What are the Possible Causes of the DTC P0096 2019 Ford F150?
- Faulty Intake Air Temperature 2 (IAT2) Sensor
- Intake Air Temperature 2 Sensor harness is open or shorted
- Intake Air Temperature 2 Sensor circuit poor electrical connection
How to Fix the DTC P0096 2019 Ford F150?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0096 2019 Ford F150 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0096 2019 Ford F150 code?
Need more information on how to fix the P0096 2019 Ford F150 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0096 2019 Ford F150 code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0096 2019 Ford F150 Code
1. What are the common symptoms of OBDII code P0096 in a 2019 Ford F150?
- Common symptoms include poor engine performance, decreased fuel efficiency, rough idling, and potential stalling of the vehicle.
2. What does the OBDII code P0096 for Intake Air Temperature Sensor 2 Circuit Range/Performance Bank 1 mean in a 2019 Ford F150?
- This code indicates an issue with the intake air temperature sensor circuit in Bank 1, specifically pertaining to its range or performance.
3. What are the possible causes of OBDII code P0096 in a 2019 Ford F150?
- Potential causes include a faulty intake air temperature sensor, wiring or connector issues, sensor circuit malfunction, or a problem with the Engine Control Module (ECM).
4. How can I diagnose the source of OBDII code P0096 in my 2019 Ford F150?
- Diagnosis involves checking the intake air temperature sensor and its connections, inspecting the wiring for damage, and using a scan tool to monitor sensor data and circuit performance.
5. Can I continue driving my 2019 Ford F150 with OBDII code P0096 present?
- It's recommended not to drive the vehicle with this code active, as it can lead to further engine issues and potential damage if left unresolved.
6. How can I repair OBDII code P0096 in my 2019 Ford F150?
- Repair may involve replacing the faulty intake air temperature sensor, repairing or replacing damaged wiring, or addressing any ECM issues causing the fault code.
7. Is it possible to reset the OBDII code P0096 in a 2019 Ford F150 without fixing the underlying issue?
- While you can clear the code with an OBDII scanner, it's crucial to address the root cause to prevent the code from reappearing and ensure proper vehicle performance.
8. Are there any DIY tips for resolving OBDII code P0096 in a 2019 Ford F150?
- DIY tips include checking sensor connections, inspecting wiring for damage, and ensuring the sensor is clean and functioning correctly before considering replacement.
9. How can I prevent OBDII code P0096 from occurring in my 2019 Ford F150 in the future?
- Regular maintenance and inspections of the intake air temperature sensor, wiring, and related components can help prevent issues that trigger this fault code.
10. Will fixing OBDII code P0096 improve the overall performance and fuel efficiency of my 2019 Ford F150?
- Yes, resolving this code can lead to improved engine performance, better fuel efficiency, and overall smoother operation of the vehicle.
Discuss the causes and fixes for P0096 2019 Ford F150 OBDII Code
Code P0096 2019 Ford F150 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
