P0096 2018 GMC Sierra Code - Intake Air Temperature Sensor 2 Circuit Range/Performance
Quick Answer
The Intake Air Temperature (IAT) sensor 1 is a variable resistor that changes the voltage on the Engine Control Module (ECM) supplied 5 V signal circuit. Common causes include Faulty Intake Air Temperature (IAT) sensor, Intake Air Temperature sensor harness is open or shorted, Intake Air Temperature sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0096 2018 GMC Sierra indicates Intake Air Temperature Sensor 2 Circuit Range/Performance.
- Common causes
- Common causes include Faulty Intake Air Temperature (IAT) sensor, Intake Air Temperature sensor harness is open or shorted, Intake Air Temperature sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0096 2018 GMC Sierra Description
What are the Possible Causes of the DTC P0096 2018 GMC Sierra?
- Faulty Intake Air Temperature (IAT) sensor
- Intake Air Temperature sensor harness is open or shorted
- Intake Air Temperature sensor circuit poor electrical connection
- Faulty Engine Control Module (ECM)
How to Fix the DTC P0096 2018 GMC Sierra?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
User Submitted Video
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0096 2018 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0096 2018 GMC Sierra code?
Need more information on how to fix the P0096 2018 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0096 2018 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0096 2018 GMC Sierra Code
1. What are the common symptoms of OBDII code P0096 in a 2018 GMC Sierra related to the Intake Air Temperature Sensor 2 Circuit Range/Performance?
- Common symptoms include reduced engine performance, rough idling, decreased fuel efficiency, and potential issues with the vehicle's exhaust emissions.
2. What are the possible causes of OBDII code P0096 in a 2018 GMC Sierra?
- Possible causes may include a faulty intake air temperature sensor, damaged wiring or connectors in the sensor circuit, a malfunctioning engine control module (ECM), or issues with the air intake system.
3. How can I diagnose the Intake Air Temperature Sensor 2 Circuit Range/Performance issue in my 2018 GMC Sierra?
- Diagnosis typically involves using an OBDII scanner to retrieve the specific fault code (P0096), inspecting the intake air temperature sensor and its connections for damage, and testing the sensor's functionality using a multimeter.
4. Can I continue driving my 2018 GMC Sierra with OBDII code P0096 present?
- It is generally not recommended to continue driving with this fault code present, as it can lead to potential engine performance issues and increased fuel consumption. It is advisable to address the underlying problem promptly.
5. How can I repair OBDII code P0096 in my 2018 GMC Sierra?
- Repair options may include replacing the intake air temperature sensor, repairing or replacing damaged wiring or connectors, resetting the ECM, or addressing any underlying issues with the air intake system.
6. Is it possible to reset the OBDII code P0096 in a 2018 GMC Sierra without repairing the issue?
- While clearing the fault code using an OBDII scanner may temporarily turn off the check engine light, the underlying problem causing the code will persist unless properly repaired. It is recommended to address the root cause of the issue.
7. Can extreme weather conditions affect the Intake Air Temperature Sensor 2 Circuit Range/Performance in a 2018 GMC Sierra?
- Yes, extreme temperatures can affect the accuracy and performance of the intake air temperature sensor, potentially leading to the triggering of OBDII code P0096. It is important to ensure the sensor is functioning correctly in all weather conditions.
8. How long does it typically take to repair OBDII code P0096 related to the Intake Air Temperature Sensor 2 Circuit in a 2018 GMC Sierra?
- The repair time can vary depending on the underlying cause of the issue. Simple fixes like replacing a sensor or connector may take an hour or two, while more complex issues could require more time for diagnosis and repair.
9. Will OBDII code P0096 in a 2018 GMC Sierra cause permanent damage if left unrepaired?
- Leaving the issue unresolved can potentially lead to further damage to the engine or emission control system over time. It is advisable to address the problem promptly to prevent any long-term consequences.
10. Are there any preventive maintenance steps I can take to avoid OBDII code P0096 in my 2018 GMC Sierra?
- Regularly inspecting and maintaining the intake air temperature sensor, checking the wiring connections, and ensuring the air intake system is clean and free of obstructions can help prevent issues that may trigger code P0096.
Discuss the causes and fixes for P0096 2018 GMC Sierra OBDII Code
Code P0096 2018 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
