P0096 2014 Chevrolet Silverado Code - Intake Air Temperature Sensor 2 Circuit Range/Performance
Quick Answer
The Intake Air Temperature (IAT) sensor 1 is a variable resistor that changes the voltage on the Engine Control Module (ECM) supplied 5 V signal circuit. Common causes include Faulty Intake Air Temperature sensor, Intake Air Temperature sensor harness is open or shorted, Intake Air Temperature sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0096 2014 Chevrolet Silverado indicates Intake Air Temperature Sensor 2 Circuit Range/Performance.
- Common causes
- Common causes include Faulty Intake Air Temperature sensor, Intake Air Temperature sensor harness is open or shorted, Intake Air Temperature sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0096 2014 Chevrolet Silverado Description
What are the Possible Causes of the DTC P0096 2014 Chevrolet Silverado?
- Faulty Intake Air Temperature sensor
- Intake Air Temperature sensor harness is open or shorted
- Intake Air Temperature sensor circuit poor electrical connection
- Faulty Engine Control Module (ECM)
How to Fix the DTC P0096 2014 Chevrolet Silverado?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0096 2014 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0096 2014 Chevrolet Silverado code?
Need more information on how to fix the P0096 2014 Chevrolet Silverado code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0096 2014 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0096 2014 Chevrolet Silverado Code
1. What are the common symptoms of OBDII code P0096 in a 2014 Chevrolet Silverado?
- Common symptoms include poor engine performance, decreased fuel efficiency, and the Check Engine light illuminating on the dashboard.
2. What does the OBDII code P0096 related to the Intake Air Temperature Sensor 2 Circuit Range/Performance mean?
- This code indicates that the Engine Control Module (ECM) has detected a voltage signal from the Intake Air Temperature Sensor 2 that is outside of the expected range.
3. What are the possible causes of OBDII code P0096 in a 2014 Chevrolet Silverado?
- Possible causes include a faulty Intake Air Temperature Sensor 2, damaged wiring or connectors in the sensor circuit, or issues with the ECM.
4. How can I diagnose the cause of OBDII code P0096 in my 2014 Chevrolet Silverado?
- Diagnosing the issue involves checking the Intake Air Temperature Sensor 2 for proper operation, inspecting the sensor's wiring and connectors for damage, and using a diagnostic scanner to read live data from the sensor.
5. Can I continue driving my 2014 Chevrolet Silverado with OBDII code P0096 present?
- It is not recommended to drive the vehicle with this code active, as it can lead to further engine issues and potential damage if left unresolved.
6. How can I repair OBDII code P0096 in my 2014 Chevrolet Silverado?
- Repair options may include replacing the faulty Intake Air Temperature Sensor 2, repairing damaged wiring or connectors, or reprogramming the ECM if necessary.
7. Are there any DIY tips for addressing OBDII code P0096 in a 2014 Chevrolet Silverado?
- DIY enthusiasts can start by checking the sensor and its connections for visible damage, and if comfortable, replace the sensor following manufacturer guidelines.
8. Is it necessary to reset the ECM after repairing OBDII code P0096 in a 2014 Chevrolet Silverado?
- It is recommended to reset the ECM using a diagnostic scanner after repairing the issue to clear the code and ensure proper relearning of the sensor's data.
9. How much can I expect to pay for repairing OBDII code P0096 in a 2014 Chevrolet Silverado at a professional mechanic?
- The cost of repair can vary depending on the exact cause of the issue, but it may range from $100 to $300 or more, including parts and labor.
10. Can a faulty Intake Air Temperature Sensor 2 trigger other OBDII codes in a 2014 Chevrolet Silverado?
- Yes, a malfunctioning sensor can sometimes trigger related codes such as P0095 (Intake Air Temperature Sensor 2 Circuit) or affect the vehicle's overall performance, leading to additional codes.
Discuss the causes and fixes for P0096 2014 Chevrolet Silverado OBDII Code
Code P0096 2014 Chevrolet Silverado comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
