AutoCodes – Dodge – P0088 Dodge

P0088 Dodge Code - Fuel Rail Pressure Too High Bank 1

Quick Answer

The Powertrain Control Module (PCM) provides the Fuel Rail Pressure Sensor with a 5-Volt supply and sensor ground and receives a signal voltage back from the Fuel Rail Pressure Sensor. Common causes include Faulty Fuel Pump, Blocked Fuel Filter, Faulty Fuel Pressure Sensor. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0088 Dodge indicates Fuel Rail Pressure Too High Bank 1.
Common causes: Common causes include Faulty Fuel Pump, Blocked Fuel Filter, Faulty Fuel Pressure Sensor.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 28,077

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jul 08, 2020

Description
Possible Causes
How To Fix
Tech Notes ▶
Cost to Diagnose
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0088 Dodge Description

The Powertrain Control Module (PCM) provides the Fuel Rail Pressure Sensor with a 5-Volt supply and sensor ground and receives a signal voltage back from the Fuel Rail Pressure Sensor. This sensor signal voltage changes based on the pressure in the fuel rail. The PCM will light the MIL lamp immediately after the diagnostic runs and fails. During this time the customer may experience the power and/or speed derate. The PCM will turn off the MIL light after the diagnostic runs and passes in four consecutive drive cycles. The Diagnostic Trouble Code (DTC) will set when the fuel pressure is above a calibrated value for a calibrated amount of time.

OBDII Code P0088 Dodge - Fuel Rail Pressure Too High Bank 1 - AutoCodes.com — P0088 Dodge Code - Fuel Rail Pressure Too High Bank 1

What does this mean?

What are the Possible Causes of the DTC P0088 Dodge?

Faulty Fuel Pump
Blocked Fuel Filter
Faulty Fuel Pressure Sensor
Fuel Pressure Sensor harness is open or shorted
Fuel Pressure Sensor electrical circuit poor connection
Faulty Fuel Injector

How to Fix the DTC P0088 Dodge?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

Dodge Ram Cummins 5.9 Fuel Pressure Sensor Replacement

User Submitted Video

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0088 Dodge code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0088 Dodge code?

Need more information on how to fix the P0088 Dodge code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0088 Dodge code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.