AutoCodes.com
Login with Google
AutoCodes – Chrysler – P0087 Chrysler

P0087 Chrysler Code - Fuel Rail Pressure Too Low

Quick Answer

High pressure from the fuel pump is routed to the fuel rail. Common causes include Faulty Fuel Pump, Blocked Fuel Filter, Faulty Fuel Pressure Sensor. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P0087 Chrysler indicates Fuel Rail Pressure Too Low.
Common causes
Common causes include Faulty Fuel Pump, Blocked Fuel Filter, Faulty Fuel Pressure Sensor.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Save to My Repairs Step-by-Step Diagnostic Guide My Repairs
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 16,259
How popular is this code, among other codes? Low
What is this?
Table of contents Created and updated by William Orellana on Nov 04, 2023
💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0087 Chrysler Description

High pressure from the fuel pump is routed to the fuel rail. The fuel rail then supplies the necessary fuel to each individual fuel injector. The Diagnostic Trouble Code (DTC) will set when the actual fuel pressure differs from set point more than a calibrated amount for a calibrated amount of time.
OBDII Code P0087 Chrysler - Fuel Rail Pressure Too Low - AutoCodes.com
P0087 Chrysler Code - Fuel Rail Pressure Too Low
What does this mean?

What are the Possible Causes of the DTC P0087 Chrysler?

  • Faulty Fuel Pump
  • Blocked Fuel Filter
  • Faulty Fuel Pressure Sensor
  • Fuel Pressure Sensor harness is open or shorted
  • Fuel Pressure Sensor electrical circuit poor connection
  • Faulty Fuel Injector

How to Fix the DTC P0087 Chrysler?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0087 Chrysler code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0087 Chrysler code?

Need more information on how to fix the P0087 Chrysler code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0087 Chrysler code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0087 Chrysler Code

1. What are the common symptoms of OBDII code P0087 in a Chrysler vehicle?

- Common symptoms include rough idle, hesitation during acceleration, reduced engine power, and the illumination of the check engine light.

2. What are the possible causes of OBDII code P0087 in a Chrysler vehicle?

- The code P0087 in a Chrysler may be triggered by issues such as a faulty fuel pump, fuel pressure regulator malfunction, clogged fuel filter, or a leak in the fuel system.

3. How can I diagnose the cause of OBDII code P0087 in my Chrysler?

- Diagnosing code P0087 involves checking the fuel pressure using a pressure gauge, inspecting the fuel pump, fuel filter, and fuel pressure regulator for any signs of damage or malfunction, and checking for leaks in the fuel system.

4. Is it safe to continue driving my Chrysler with OBDII code P0087 present?

- It is not recommended to continue driving your Chrysler with OBDII code P0087 present, as it can lead to engine performance issues and potential damage if left unresolved.

5. How can I repair OBDII code P0087 in my Chrysler?

- Repairing OBDII code P0087 may involve replacing a faulty fuel pump, repairing or replacing the fuel pressure regulator, replacing a clogged fuel filter, or fixing any leaks in the fuel system.

6. Can a DIY enthusiast fix OBDII code P0087 in a Chrysler?

- While some DIY enthusiasts may be able to address simpler causes of OBDII code P0087, it is recommended to seek professional help for a comprehensive diagnosis and repair to ensure the issue is properly resolved.

7. Will resetting the OBDII code P0087 in my Chrysler make the problem go away?

- Resetting the code may temporarily turn off the check engine light, but it will not fix the underlying issue causing OBDII code P0087 in your Chrysler.

8. How much does it typically cost to repair OBDII code P0087 in a Chrysler?

- The cost of repairing OBDII code P0087 in a Chrysler can vary depending on the specific cause of the issue, but it may range from a few hundred to over a thousand dollars, including parts and labor.

9. Are there any preventive measures to avoid OBDII code P0087 in a Chrysler?

- Regular maintenance of the fuel system, such as changing the fuel filter at recommended intervals, can help prevent issues that may trigger OBDII code P0087 in a Chrysler.

10. Can a mechanic use a scan tool to diagnose OBDII code P0087 in a Chrysler?

- Yes, a mechanic can use a scan tool to read the code, view live data related to fuel pressure, and conduct diagnostic tests to pinpoint the cause of OBDII code P0087 in a Chrysler.

Discuss the causes and fixes for P0087 Chrysler OBDII Code

Submit a New Comment
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play