P0083 KIA Code - Intake Valve Control Solenoid Circuit High Bank 2
Quick Answer
Intake valve timing control solenoid valve is activated by ON/OFF pulse duty (ratio) signals from the Engine Control Module (ECM). Common causes include Faulty Intake Valve Control Solenoid Valve, Intake Valve Control Solenoid Valve harness is open or shorted, Intake Valve Control Solenoid Valve circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0083 KIA indicates Intake Valve Control Solenoid Circuit High Bank 2.
- Common causes
- Common causes include Faulty Intake Valve Control Solenoid Valve, Intake Valve Control Solenoid Valve harness is open or shorted, Intake Valve Control Solenoid Valve circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0083 KIA Description
The intake valve timing control solenoid valve changes the oil amount and direction of flow through intake valve timing control unit or stops oil flow.
The longer pulse width advances valve angle. The shorter pulse width retards valve angle. When ON and OFF pulse widths become equal, the solenoid valve stops oil pressure flow to fix the intake valve angle at the control position.
What are the Possible Causes of the DTC P0083 KIA?
- Faulty Intake Valve Control Solenoid Valve
- Intake Valve Control Solenoid Valve harness is open or shorted
- Intake Valve Control Solenoid Valve circuit poor electrical connection
How to Fix the DTC P0083 KIA?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0083 KIA code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0083 KIA code?
Need more information on how to fix the P0083 KIA code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0083 KIA code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0083 KIA Code
What does the OBDII code P0083 mean for a KIA vehicle?
P0083 indicates a problem with the Intake Valve Control Solenoid Circuit High on Bank 2, which manages the variable valve timing for the intake valves.
What are the common symptoms of code P0083 in a KIA?
Symptoms may include reduced engine performance, rough idling, poor fuel efficiency, and an illuminated check engine light.
What causes code P0083 to appear on a KIA?
Possible causes include a faulty intake valve control solenoid, wiring issues, a bad electrical connection, or a failed PCM (Powertrain Control Module).
How can I diagnose code P0083 in my KIA?
You can diagnose P0083 by inspecting the intake valve control solenoid, checking the wiring and connectors, and using a multimeter to test circuit continuity and voltage.
Is it safe to drive with code P0083 on a KIA?
While the vehicle may still run, driving with P0083 can lead to reduced performance and potential engine damage over time. It’s best to address the issue promptly.
How do I fix code P0083 on a KIA?
Repairs may involve replacing the intake valve control solenoid, repairing or replacing damaged wiring, or addressing issues with the PCM.
Can a dirty intake valve control solenoid cause code P0083?
Yes, a clogged or dirty solenoid can restrict its movement, leading to the circuit high issue. Cleaning or replacing the solenoid may resolve the problem.
How much does it cost to fix code P0083 on a KIA?
Repair costs vary but typically range from $100 to $300 for solenoid replacement, depending on labor and parts pricing.
Does code P0083 affect Bank 1 or Bank 2 of the engine?
Code P0083 specifically relates to Bank 2, which is the side of the engine opposite Bank 1.
Can a PCM failure trigger code P0083 on a KIA?
Yes, a malfunctioning PCM can misinterpret or fail to regulate the intake valve control solenoid, causing the P0083 code.
Discuss the causes and fixes for P0083 KIA OBDII Code
Code P0083 KIA comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
