P0082 KIA Code - Intake Valve Control Solenoid Circuit Low Bank 2
Quick Answer
Intake valve timing control solenoid valve is activated by ON/OFF pulse duty (ratio) signals from the Engine Control Module (ECM). Common causes include Faulty Intake Valve Control Solenoid Valve, Intake Valve Control Solenoid Valve harness is open or shorted, Intake Valve Control Solenoid Valve circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0082 KIA indicates Intake Valve Control Solenoid Circuit Low Bank 2.
- Common causes
- Common causes include Faulty Intake Valve Control Solenoid Valve, Intake Valve Control Solenoid Valve harness is open or shorted, Intake Valve Control Solenoid Valve circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0082 KIA Description
The intake valve timing control solenoid valve changes the oil amount and direction of flow through intake valve timing control unit or stops oil flow.
The longer pulse width advances valve angle. The shorter pulse width retards valve angle. When ON and OFF pulse widths become equal, the solenoid valve stops oil pressure flow to fix the intake valve angle at the control position.
What are the Possible Causes of the DTC P0082 KIA?
- Faulty Intake Valve Control Solenoid Valve
- Intake Valve Control Solenoid Valve harness is open or shorted
- Intake Valve Control Solenoid Valve circuit poor electrical connection
How to Fix the DTC P0082 KIA?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0082 KIA code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0082 KIA code?
Need more information on how to fix the P0082 KIA code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0082 KIA code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0082 KIA Code
What does the OBDII code P0082 mean for a Kia?
P0082 indicates an issue with the Intake Valve Control Solenoid Circuit Low on Bank 2, meaning the control circuit has a low voltage issue.
What are the common symptoms of the P0082 code?
Symptoms may include poor engine performance, rough idling, reduced fuel efficiency, and an illuminated check engine light.
What causes the P0082 code to appear?
Common causes include a faulty intake valve control solenoid, damaged wiring or connectors, a short circuit, or a malfunctioning PCM (Powertrain Control Module).
Can I drive my Kia with the P0082 code?
Driving with this code is not recommended, as it can lead to further engine performance issues or damage over time.
How can I diagnose the P0082 code?
Diagnosis involves checking the intake valve control solenoid, inspecting wiring and connectors for damage, and testing the circuit's voltage with a multimeter.
How do I fix the P0082 code on my Kia?
Repairs may include replacing the intake valve control solenoid, repairing or replacing damaged wiring or connectors, or addressing issues with the PCM.
How much does it cost to fix the P0082 code?
Repair costs vary but typically range from $100 to $300, depending on whether the solenoid or wiring needs replacement.
What tools are needed to troubleshoot the P0082 code?
You’ll need a diagnostic scanner, multimeter, and possibly basic hand tools to inspect and troubleshoot the circuit and solenoid.
Is the P0082 code specific to Kia vehicles?
No, the P0082 code is a generic OBDII code that can appear on various makes and models, but its application and repair steps may vary slightly.
Can a dirty oil system trigger the P0082 code?
Yes, dirty or low engine oil can affect the performance of the intake valve control solenoid, potentially triggering the code.
Discuss the causes and fixes for P0082 KIA OBDII Code
Code P0082 KIA comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
