P0075 2012 Nissan Versa Code - Intake Valve Control Solenoid Circuit Bank 1
Quick Answer
Intake valve timing control solenoid valve is activated by ON/OFF pulse duty (ratio) signals from the Engine Control Module (ECM). Common causes include Faulty Intake Valve Control Solenoid Bank 1, Intake Valve Control Solenoid Circuit Bank 1 harness is open or shorted, Intake Valve Control Solenoid Circuit Bank 1 circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0075 2012 Nissan Versa indicates Intake Valve Control Solenoid Circuit Bank 1.
- Common causes
- Common causes include Faulty Intake Valve Control Solenoid Bank 1, Intake Valve Control Solenoid Circuit Bank 1 harness is open or shorted, Intake Valve Control Solenoid Circuit Bank 1 circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0075 2012 Nissan Versa Description
The intake valve timing control solenoid valve changes the oil amount and direction of flow through intake valve timing control unit or stops oil flow.
The longer pulse width advances valve angle. The shorter pulse width retards valve angle. When ON and OFF pulse widths become equal, the solenoid valve stops oil pressure flow to fix the intake valve angle at the control position.
What are the Possible Causes of the DTC P0075 2012 Nissan Versa?
- Faulty Intake Valve Control Solenoid Bank 1
- Intake Valve Control Solenoid Circuit Bank 1 harness is open or shorted
- Intake Valve Control Solenoid Circuit Bank 1 circuit poor electrical connection
How to Fix the DTC P0075 2012 Nissan Versa?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0075 2012 Nissan Versa code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0075 2012 Nissan Versa code?
Need more information on how to fix the P0075 2012 Nissan Versa code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0075 2012 Nissan Versa code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0075 2012 Nissan Versa Code
1. What are the common symptoms of OBDII code P0075 in a 2012 Nissan Versa?
- Common symptoms include rough idling, reduced engine performance, poor fuel efficiency, and the illumination of the Check Engine light.
2. What does the OBDII code P0075 on a 2012 Nissan Versa indicate?
- The code P0075 indicates a problem with the Intake Valve Control Solenoid Circuit for Bank 1 in the engine.
3. What are the potential causes of OBDII code P0075 in a 2012 Nissan Versa?
- Possible causes include a faulty intake valve control solenoid, damaged wiring or connectors in the circuit, low engine oil levels, or issues with the engine control module.
4. How can I diagnose the OBDII code P0075 in my 2012 Nissan Versa?
- Diagnosing the code typically involves using an OBDII scanner to retrieve the specific fault codes, inspecting the intake valve control solenoid and its wiring, and testing the solenoid for proper functionality.
5. Can I continue driving my 2012 Nissan Versa with OBDII code P0075?
- It is not recommended to continue driving with the code present, as it can lead to further engine issues and potentially worsen the existing symptoms.
6. How can I repair OBDII code P0075 in my 2012 Nissan Versa?
- Repair options may include replacing the faulty intake valve control solenoid, repairing damaged wiring or connectors, checking and replenishing engine oil levels, or resetting the engine control module.
7. Is it possible to clear OBDII code P0075 in a 2012 Nissan Versa without fixing the issue?
- Clearing the code without addressing the underlying problem may temporarily turn off the Check Engine light, but the issue will likely resurface, leading to continued symptoms and potential engine damage.
8. Are there any preventative measures to avoid OBDII code P0075 in a 2012 Nissan Versa?
- Regular maintenance, such as oil changes and inspections, can help prevent issues that may trigger the code. Additionally, addressing any warning signs promptly can help prevent further damage.
9. How much does it typically cost to repair OBDII code P0075 in a 2012 Nissan Versa?
- The repair cost can vary depending on the exact cause of the issue, but it may range from $100 to $300 for parts and labor, excluding any additional diagnostic fees.
10. Can a DIY enthusiast fix OBDII code P0075 in a 2012 Nissan Versa?
- Depending on the DIYer's skill level and access to tools, it is possible to address some aspects of the repair, such as replacing the intake valve control solenoid or checking for wiring issues. However, complex diagnostics may require professional assistance.
Discuss the causes and fixes for P0075 2012 Nissan Versa OBDII Code
Code P0075 2012 Nissan Versa comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
