P0075 2011 Nissan Versa Code - Intake Valve Control Solenoid Circuit Bank 1
Quick Answer
Intake valve timing control solenoid valve is activated by ON/OFF pulse duty (ratio) signals from the Engine Control Module (ECM). Common causes include Faulty Intake Valve Control Solenoid Bank 1, Intake Valve Control Solenoid Circuit Bank 1 harness is open or shorted, Intake Valve Control Solenoid Circuit Bank 1 circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0075 2011 Nissan Versa indicates Intake Valve Control Solenoid Circuit Bank 1.
- Common causes
- Common causes include Faulty Intake Valve Control Solenoid Bank 1, Intake Valve Control Solenoid Circuit Bank 1 harness is open or shorted, Intake Valve Control Solenoid Circuit Bank 1 circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0075 2011 Nissan Versa Description
The intake valve timing control solenoid valve changes the oil amount and direction of flow through intake valve timing control unit or stops oil flow.
The longer pulse width advances valve angle. The shorter pulse width retards valve angle. When ON and OFF pulse widths become equal, the solenoid valve stops oil pressure flow to fix the intake valve angle at the control position.
What are the Possible Causes of the DTC P0075 2011 Nissan Versa?
- Faulty Intake Valve Control Solenoid Bank 1
- Intake Valve Control Solenoid Circuit Bank 1 harness is open or shorted
- Intake Valve Control Solenoid Circuit Bank 1 circuit poor electrical connection
How to Fix the DTC P0075 2011 Nissan Versa?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0075 2011 Nissan Versa code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0075 2011 Nissan Versa code?
Need more information on how to fix the P0075 2011 Nissan Versa code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0075 2011 Nissan Versa code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0075 2011 Nissan Versa Code
1. What does OBDII code P0075 on a 2011 Nissan Versa mean?
The code P0075 indicates a problem with the Intake Valve Control Solenoid Circuit on Bank 1 of the engine.
2. What are common symptoms of OBDII code P0075 on a 2011 Nissan Versa?
Common symptoms include rough idling, engine misfires, poor fuel efficiency, and a reduction in overall engine performance.
3. What are possible causes of OBDII code P0075 on a 2011 Nissan Versa?
Possible causes include a faulty intake valve control solenoid, wiring issues, poor electrical connections, or a malfunctioning engine control module.
4. How can I diagnose the Intake Valve Control Solenoid Circuit issue causing OBDII code P0075 on my 2011 Nissan Versa?
You can use a multimeter to check the resistance of the solenoid, visually inspect the wiring for any damage, and perform a thorough scan of the engine control module to pinpoint the exact cause.
5. Can I continue driving my 2011 Nissan Versa with OBDII code P0075?
It is not recommended to continue driving with this code present, as it can lead to further engine damage and potential safety hazards. It is best to address the issue promptly.
6. How can I repair OBDII code P0075 on a 2011 Nissan Versa?
Repair options may include replacing the intake valve control solenoid, repairing or replacing damaged wiring, ensuring good electrical connections, and resetting the engine control module.
7. Are there any DIY tips for fixing OBDII code P0075 on a 2011 Nissan Versa?
While some basic troubleshooting steps can be done at home, it is advisable to consult a professional mechanic for a proper diagnosis and repair to ensure the issue is resolved correctly.
8. Is resetting the Check Engine Light enough to fix OBDII code P0075 on a 2011 Nissan Versa?
Simply resetting the Check Engine Light may temporarily clear the code, but it will not fix the underlying issue causing the fault code to appear. Proper diagnosis and repair are necessary.
9. How much does it typically cost to repair OBDII code P0075 on a 2011 Nissan Versa?
Repair costs can vary depending on the exact cause of the issue, but it is recommended to budget for parts and labor expenses involved in replacing the intake valve control solenoid and addressing any wiring issues.
10. Can OBDII code P0075 on a 2011 Nissan Versa affect vehicle emissions?
Yes, this code can impact emissions and may cause the vehicle to fail emissions tests. It is crucial to address the issue promptly to maintain proper engine performance and emissions compliance.
Discuss the causes and fixes for P0075 2011 Nissan Versa OBDII Code
Code P0075 2011 Nissan Versa comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
