AutoCodes – Suzuki – P0060 Suzuki

P0060 Suzuki Code - HO2S22 Heater Control Circuit Low/High/Heater Resistance

Quick Answer

The Heated Oxygen Sensor (HO2S) must reach the operating temperature to provide an accurate voltage signal. Common causes include Faulty heated oxygen sensor, Heated oxygen sensor harness open or shorted, Heated oxygen sensor circuit poor connection. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.

What it means: P0060 Suzuki indicates HO2S22 Heater Control Circuit Low/High/Heater Resistance.
Common causes: Common causes include Faulty heated oxygen sensor, Heated oxygen sensor harness open or shorted, Heated oxygen sensor circuit poor connection.
Severity: Moderate - service should be scheduled soon.
Can I drive?: The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 5,252

How popular is this code, among other codes? Low

Repair Importance Level

Moderate (Service soon) (2 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jul 13, 2020

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0060 Suzuki Description

The Heated Oxygen Sensor (HO2S) must reach the operating temperature to provide an accurate voltage signal. A heating element inside the HO2S minimizes the time required for the sensor to reach operating temperature. With the engine running, the ground is provided to the heater by the HO2S heater low control circuit through a low side driver within the Powertrain Control Module (PCM). The PCM commands the heater ON or OFF to maintain a specific HO2S operating temperature range. The PCM determines the temperature by measuring the current flow through the heater. When the heater is in the ON state, the PCM will pulse the heater OFF for 50 ms, once per second. The PCM calculates the heater resistance on a cold start. The Diagnostic Trouble Code (DTC) will set if the heater current requirements too low or high in the HO2S heater control circuit.

OBDII Code P0060 Suzuki - HO2S22 Heater Control Circuit Low/High/Heater Resistance - AutoCodes.com — P0060 Suzuki Code - HO2S22 Heater Control Circuit Low/High/Heater Resistance

What does this mean?

What are the Possible Causes of the DTC P0060 Suzuki?

Faulty heated oxygen sensor
Heated oxygen sensor harness open or shorted
Heated oxygen sensor circuit poor connection
Faulty heated oxygen sensor relay
Faulty Engine Control Module (ECM)

How to Fix the DTC P0060 Suzuki?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0060 Suzuki code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0060 Suzuki code?

Need more information on how to fix the P0060 Suzuki code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0060 Suzuki code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0060 Suzuki Code

1. What are the common symptoms of OBDII code P0060 Suzuki?

- Common symptoms include poor fuel economy, rough idling, engine misfires, and the illumination of the Check Engine Light.

2. What does the OBDII code P0060 Suzuki indicate?

- The code P0060 indicates an issue with the Heater Control Circuit of the HO2S22 (Heated Oxygen Sensor 2 Bank 2).

3. What are the possible causes of OBDII code P0060 Suzuki?

- Possible causes include a faulty HO2S22 sensor, damaged wiring or connectors in the heater circuit, a blown fuse, or a problem with the engine control module (ECM).

4. How can I diagnose the HO2S22 Heater Control Circuit issue?

- Diagnosis involves checking the sensor's resistance with a multimeter, inspecting the wiring and connectors for damage, and ensuring the fuse related to the heater circuit is intact.

5. How can I repair OBDII code P0060 Suzuki?

- Repair options include replacing the HO2S22 sensor, repairing or replacing damaged wiring or connectors, checking and replacing the fuse if necessary, and resetting the fault code.

6. Can I drive my vehicle with OBDII code P0060 Suzuki?

- It is not recommended to drive your vehicle with this code unresolved, as it can lead to decreased fuel efficiency and potential engine performance issues.

7. How much does it typically cost to repair OBDII code P0060 Suzuki?

- The cost of repair can vary depending on the exact cause of the issue, but it may range from $100 to $300, including parts and labor.

8. Is it possible to clear the OBDII code P0060 Suzuki without fixing the issue?

- Clearing the code without addressing the underlying problem will only temporarily turn off the Check Engine Light, as the issue will likely reoccur.

9. Can a DIY enthusiast fix OBDII code P0060 Suzuki at home?

- Depending on your skill level and access to tools, DIY enthusiasts can attempt to diagnose and repair this code at home by following proper procedures and safety precautions.

10. How long does it take to repair OBDII code P0060 Suzuki?

- The repair time can vary based on the specific cause of the issue and the expertise of the mechanic, but it typically takes 1-2 hours to diagnose and fix the problem.