AutoCodes – Oldsmobile – P0060 Oldsmobile

P0060 Oldsmobile Code - HO2S Heater Resistance Bank 2 Sensor 2

Quick Answer

Heated Oxygen Sensors (HO2S) are used for fuel control and post catalyst monitoring. Common causes include Faulty Heated Oxygen Sensor (H2OS) Bank 2 Sensor 2, Heated Oxygen Sensor Bank 2 Sensor 2 harness is open shorted, Heated Oxygen Sensor Bank 2 Sensor 2 circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0060 Oldsmobile indicates HO2S Heater Resistance Bank 2 Sensor 2.
Common causes: Common causes include Faulty Heated Oxygen Sensor (H2OS) Bank 2 Sensor 2, Heated Oxygen Sensor Bank 2 Sensor 2 harness is open shorted, Heated Oxygen Sensor Bank 2 Sensor 2 circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 1,129

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Mar 23, 2024

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0060 Oldsmobile Description

Heated Oxygen Sensors (HO2S) are used for fuel control and post catalyst monitoring. Each HO2S compares the oxygen content of the surrounding air with the oxygen content in the exhaust stream. The HO2S must reach an operating temperature to provide an accurate voltage signal. A heating element inside the HO2S minimizes the time required for the sensors to reach operating temperature. Voltage is provided to the heater by an ignition voltage circuit through a fuse. With the engine running, the ground is provided to the heater by the HO2S heater low control circuit through a low side driver within the Engine Control Module (ECM). The ECM uses Pulse Width Modulation (PWM) to control the HO2S heater operation to maintain a specific HO2S operating temperature range.
The Diagnostic Trouble Code (DTC) will be set when the ECM detects the HO2S heater is not within a specified resistance range at engine start-up.

OBDII Code P0060 Oldsmobile - HO2S Heater Resistance Bank 2 Sensor 2 - AutoCodes.com — P0060 Oldsmobile Code - HO2S Heater Resistance Bank 2 Sensor 2

What does this mean?

What are the Possible Causes of the DTC P0060 Oldsmobile?

Faulty Heated Oxygen Sensor (H2OS) Bank 2 Sensor 2
Heated Oxygen Sensor Bank 2 Sensor 2 harness is open shorted
Heated Oxygen Sensor Bank 2 Sensor 2 circuit poor electrical connection
Heated Oxygen Sensor Bank 2 Sensor 2 circuit fuse
Faulty Engine Control Module (ECM)

How to Fix the DTC P0060 Oldsmobile?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

The code means that there is a problem with the heater element circuit of the heated oxygen sensor. The control module monitors how long it takes the sensor to warm up and start sending an adequate signal. The code is set when the sensor is taking too long to warm up. Water getting inside the heated oxygen sensor connector can cause the heated oxygen sensor fuse to blow. Before replacing the sensor, check for the condition of the heated oxygen sensor fuse and connectors. If the fuse and connector are OK, replacing the O2 Sensor usually takes care of the problem.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0060 Oldsmobile code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0060 Oldsmobile code?

Need more information on how to fix the P0060 Oldsmobile code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0060 Oldsmobile code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0060 Oldsmobile Code

1. What are the common symptoms of OBDII code P0060 in an Oldsmobile related to HO2S Heater Resistance Bank 2 Sensor 2?

- Common symptoms include poor engine performance, decreased fuel efficiency, rough idling, and the illumination of the check engine light.

2. What are the possible causes of OBDII code P0060 in an Oldsmobile for HO2S Heater Resistance Bank 2 Sensor 2?

- Possible causes include a faulty oxygen sensor, damaged wiring or connectors, a blown fuse, or issues with the engine control module (ECM).

3. How can I diagnose OBDII code P0060 in my Oldsmobile for HO2S Heater Resistance Bank 2 Sensor 2?

- Diagnosis involves using an OBDII scanner to retrieve the specific fault code, inspecting the oxygen sensor and related components for damage, and checking the wiring and connectors for any issues.

4. What is the purpose of the HO2S Heater in Bank 2 Sensor 2 in an Oldsmobile?

- The HO2S Heater in Bank 2 Sensor 2 is responsible for ensuring the oxygen sensor reaches operating temperature quickly to provide accurate readings for the ECM.

5. Can I continue driving my Oldsmobile with OBDII code P0060 related to HO2S Heater Resistance Bank 2 Sensor 2?

- It is not recommended to continue driving with this code as it can lead to poor engine performance and potential damage to other components over time.

6. How can I repair OBDII code P0060 in an Oldsmobile for HO2S Heater Resistance Bank 2 Sensor 2?

- Repair options include replacing the faulty oxygen sensor, repairing any damaged wiring or connectors, checking and replacing fuses if needed, and resetting the code with an OBDII scanner.

7. Are there any DIY tips for addressing OBDII code P0060 in an Oldsmobile for HO2S Heater Resistance Bank 2 Sensor 2?

- DIY tips include checking the oxygen sensor connections for corrosion, ensuring the wiring is intact, and consulting the vehicle's service manual for specific repair procedures.

8. How much does it typically cost to repair OBDII code P0060 for HO2S Heater Resistance Bank 2 Sensor 2 in an Oldsmobile?

- The cost of repair can vary depending on the exact cause of the issue, but it typically ranges from $100 to $300 for parts and labor.

9. Can a mechanic easily fix OBDII code P0060 in an Oldsmobile for HO2S Heater Resistance Bank 2 Sensor 2?

- Yes, a qualified mechanic can diagnose and repair OBDII code P0060 by identifying the root cause, replacing any faulty components, and resetting the code using professional tools.

10. How often does OBDII code P0060 related to HO2S Heater Resistance Bank 2 Sensor 2 occur in Oldsmobile vehicles?

- This code can occur intermittently in Oldsmobile vehicles due to various factors, but prompt diagnosis and repair are recommended to prevent further issues.