P0060 2018 GMC Sierra Code - HO2S Heater Resistance Bank 2 Sensor 2
Quick Answer
Heated Oxygen Sensors (HO2S) are used for fuel control and post catalyst monitoring. Common causes include Faulty Heated Oxygen Sensor (H2OS) Bank 2 Sensor 2, Heated Oxygen Sensor Bank 2 Sensor 2 harness is open shorted, Heated Oxygen Sensor Bank 2 Sensor 2 circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0060 2018 GMC Sierra indicates HO2S Heater Resistance Bank 2 Sensor 2.
- Common causes
- Common causes include Faulty Heated Oxygen Sensor (H2OS) Bank 2 Sensor 2, Heated Oxygen Sensor Bank 2 Sensor 2 harness is open shorted, Heated Oxygen Sensor Bank 2 Sensor 2 circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0060 2018 GMC Sierra Description
The Diagnostic Trouble Code (DTC) will be set when the ECM detects the HO2S heater is not within a specified resistance range at engine start-up.
What are the Possible Causes of the DTC P0060 2018 GMC Sierra?
- Faulty Heated Oxygen Sensor (H2OS) Bank 2 Sensor 2
- Heated Oxygen Sensor Bank 2 Sensor 2 harness is open shorted
- Heated Oxygen Sensor Bank 2 Sensor 2 circuit poor electrical connection
- Heated Oxygen Sensor Bank 2 Sensor 2 circuit fuse
- Faulty Engine Control Module (ECM)
How to Fix the DTC P0060 2018 GMC Sierra?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0060 2018 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0060 2018 GMC Sierra code?
Need more information on how to fix the P0060 2018 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0060 2018 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0060 2018 GMC Sierra Code
1. What are the common symptoms of OBDII code P0060 in a 2018 GMC Sierra related to the HO2S Heater Resistance Bank 2 Sensor 2?
- Common symptoms include decreased fuel efficiency, rough idling, and potential stalling of the vehicle.
2. What are the possible causes of OBDII code P0060 in a 2018 GMC Sierra, specifically related to the HO2S Heater Resistance Bank 2 Sensor 2?
- The code P0060 is typically caused by a faulty oxygen sensor, damaged wiring or connectors, or a malfunctioning ECM (Engine Control Module).
3. How can I diagnose the issue causing OBDII code P0060 in my 2018 GMC Sierra with reference to the HO2S Heater Resistance Bank 2 Sensor 2?
- To diagnose the issue, you can use an OBDII scanner to read the code, visually inspect the sensor and its connections, and perform electrical tests to check for continuity and resistance.
4. Can I continue to drive my 2018 GMC Sierra with OBDII code P0060 related to the HO2S Heater Resistance Bank 2 Sensor 2?
- It is not recommended to continue driving with this code as it can lead to further damage to the vehicle and potentially affect its performance.
5. How do I repair OBDII code P0060 in my 2018 GMC Sierra concerning the HO2S Heater Resistance Bank 2 Sensor 2?
- The repair typically involves replacing the oxygen sensor in Bank 2 Sensor 2, repairing any damaged wiring or connectors, and clearing the code with an OBDII scanner.
6. Can a DIY enthusiast fix OBDII code P0060 in a 2018 GMC Sierra related to the HO2S Heater Resistance Bank 2 Sensor 2?
- Depending on your skill level and access to tools, a DIY enthusiast may be able to replace the oxygen sensor and perform basic wiring repairs. However, for more complex issues, it is recommended to seek professional help.
7. Are there any preventive measures to avoid OBDII code P0060 in a 2018 GMC Sierra associated with the HO2S Heater Resistance Bank 2 Sensor 2?
- Regular maintenance checks, including inspecting the oxygen sensors and their connections, can help prevent issues that may trigger the P0060 code.
8. How long does it typically take to repair OBDII code P0060 in a 2018 GMC Sierra related to the HO2S Heater Resistance Bank 2 Sensor 2?
- The repair time can vary depending on the extent of the issue and the availability of parts, but it usually takes a few hours to complete the necessary repairs.
9. Are there any specific tools required to diagnose and repair OBDII code P0060 in a 2018 GMC Sierra with reference to the HO2S Heater Resistance Bank 2 Sensor 2?
- Basic tools such as an OBDII scanner, a multimeter for electrical testing, and wrenches or sockets for sensor removal are typically needed for diagnosing and repairing this code.
10. Will resetting the OBDII code P0060 related to the HO2S Heater Resistance Bank 2 Sensor 2 in my 2018 GMC Sierra make it go away permanently?
- Resetting the code may temporarily clear it, but if the underlying issue is not fixed, the code is likely to reappear. It is essential to diagnose and repair the root cause of the problem for a permanent solution.
Discuss the causes and fixes for P0060 2018 GMC Sierra OBDII Code
Code P0060 2018 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
