P0060 2018 Ford F150 Code - HO2S Heater Resistance Bank 2 Sensor 2
Quick Answer
The HO2S detects the presence of oxygen in the exhaust and produces a variable voltage according to the amount of oxygen detected. Common causes include Faulty Heated Oxygen Sensor Bank 2 Sensor 2 (HO2S22), Heated Oxygen Sensor Bank 2 Sensor 2 circuit open shorted to ground, Heated Oxygen Sensor Bank 2 Sensor 2 circuit poor electrical connection. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
- What it means
- P0060 2018 Ford F150 indicates HO2S Heater Resistance Bank 2 Sensor 2.
- Common causes
- Common causes include Faulty Heated Oxygen Sensor Bank 2 Sensor 2 (HO2S22), Heated Oxygen Sensor Bank 2 Sensor 2 circuit open shorted to ground, Heated Oxygen Sensor Bank 2 Sensor 2 circuit poor electrical connection.
- Severity
- Moderate - service should be scheduled soon.
- Can I drive?
- The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
Code P0060 2018 Ford F150 Description
When the oxygen sensor is cold, disconnected, or on initial start-up, the voltage may read between 1.5 to 1.7 volts. The oxygen sensor voltage will decrease to the normal operating range of 0.0 to 1.1 volts during warm, stabilized engine running conditions.
The HO2S heater is embedded with a sensing element. The heating element heats the sensor to a temperature of 800°C (1,472°F). At approximately 300°C (572°F) the engine enters closed loop operation. The heater allows the engine to enter closed loop operation sooner.
This Diagnostic Trouble Code (DTC) sets when the heater current requirements are too low or too high in the Heated Oxygen Sensor Bank 2 Sensor 2 (HO2S22) circuit.
What are the Possible Causes of the DTC P0060 2018 Ford F150?
- Faulty Heated Oxygen Sensor Bank 2 Sensor 2 (HO2S22)
- Heated Oxygen Sensor Bank 2 Sensor 2 circuit open shorted to ground
- Heated Oxygen Sensor Bank 2 Sensor 2 circuit poor electrical connection
How to Fix the DTC P0060 2018 Ford F150?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0060 2018 Ford F150 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0060 2018 Ford F150 code?
Need more information on how to fix the P0060 2018 Ford F150 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0060 2018 Ford F150 code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0060 2018 Ford F150 Code
1. What does OBDII code P0060 on a 2018 Ford F150 mean?
- The P0060 code indicates an issue with the HO2S (Heated Oxygen Sensor) Heater Resistance for Bank 2 Sensor 2 on a 2018 Ford F150.
2. What are the common symptoms of a P0060 trouble code on a 2018 Ford F150?
- Common symptoms include poor fuel economy, rough idling, engine misfires, and the illumination of the check engine light.
3. What are the possible causes of the P0060 code on a 2018 Ford F150?
- The P0060 code can be triggered by a faulty oxygen sensor, damaged wiring or connectors, a blown fuse, or a malfunctioning engine control module (ECM).
4. How serious is the P0060 code on a 2018 Ford F150?
- While the vehicle may still be driveable with this code, it is essential to address it promptly to prevent potential damage to the catalytic converter and ensure optimal engine performance.
5. How can I diagnose the P0060 code on my 2018 Ford F150?
- Diagnosing the P0060 code typically involves using an OBDII scanner to retrieve the code, inspecting the oxygen sensor wiring and connectors, and testing the sensor's resistance with a multimeter.
6. Can I repair the P0060 code on my 2018 Ford F150 myself?
- Depending on your automotive repair skills, you may be able to replace the faulty oxygen sensor, repair damaged wiring, or address other potential causes of the P0060 code. However, professional assistance is recommended for accurate diagnosis and repair.
7. Is it safe to drive my 2018 Ford F150 with a P0060 trouble code?
- It is generally safe to drive with the P0060 code, but you should address the issue promptly to prevent performance issues and potential damage to other engine components.
8. How much does it typically cost to repair the P0060 code on a 2018 Ford F150?
- The cost of repairing the P0060 code can vary depending on the underlying cause. Expenses may include the cost of a new oxygen sensor, wiring repairs, labor charges, and diagnostic fees.
9. How long does it take to repair the P0060 code on a 2018 Ford F150?
- The repair time for a P0060 code can vary based on the exact cause of the issue and the level of expertise of the person performing the repair. In general, it may take a few hours to a full day to diagnose and fix the problem.
10. Can a P0060 code on a 2018 Ford F150 cause other issues if left unresolved?
- If left unresolved, the P0060 code can lead to reduced fuel efficiency, engine performance issues, and potential damage to the catalytic converter over time. Addressing the code promptly is recommended to avoid further complications.
Discuss the causes and fixes for P0060 2018 Ford F150 OBDII Code
Code P0060 2018 Ford F150 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
