AutoCodes – Chevrolet – P0060 2018 Chevrolet Silverado

P0060 2018 Chevrolet Silverado Code - HO2S Heater Resistance Bank 2 Sensor 2

Quick Answer

Heated Oxygen Sensors (HO2S) are used for fuel control and post catalyst monitoring. Common causes include Faulty Heated Oxygen Sensor (H2OS) Bank 2 Sensor 2, Heated Oxygen Sensor Bank 2 Sensor 2 harness is open shorted, Heated Oxygen Sensor Bank 2 Sensor 2 circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0060 2018 Chevrolet Silverado indicates HO2S Heater Resistance Bank 2 Sensor 2.
Common causes: Common causes include Faulty Heated Oxygen Sensor (H2OS) Bank 2 Sensor 2, Heated Oxygen Sensor Bank 2 Sensor 2 harness is open shorted, Heated Oxygen Sensor Bank 2 Sensor 2 circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 503

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Mar 25, 2024

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0060 2018 Chevrolet Silverado Description

Heated Oxygen Sensors (HO2S) are used for fuel control and post catalyst monitoring. Each HO2S compares the oxygen content of the surrounding air with the oxygen content in the exhaust stream. The HO2S must reach an operating temperature to provide an accurate voltage signal. A heating element inside the HO2S minimizes the time required for the sensors to reach operating temperature. Voltage is provided to the heater by an ignition voltage circuit through a fuse. With the engine running, the ground is provided to the heater by the HO2S heater low control circuit through a low side driver within the Engine Control Module (ECM). The ECM uses Pulse Width Modulation (PWM) to control the HO2S heater operation to maintain a specific HO2S operating temperature range.
The Diagnostic Trouble Code (DTC) will be set when the ECM detects the HO2S heater is not within a specified resistance range at engine start-up.

OBDII Code P0060 2018 Chevrolet Silverado - HO2S Heater Resistance Bank 2 Sensor 2 - AutoCodes.com — P0060 2018 Chevrolet Silverado Code - HO2S Heater Resistance Bank 2 Sensor 2

What does this mean?

What are the Possible Causes of the DTC P0060 2018 Chevrolet Silverado?

Faulty Heated Oxygen Sensor (H2OS) Bank 2 Sensor 2
Heated Oxygen Sensor Bank 2 Sensor 2 harness is open shorted
Heated Oxygen Sensor Bank 2 Sensor 2 circuit poor electrical connection
Heated Oxygen Sensor Bank 2 Sensor 2 circuit fuse
Faulty Engine Control Module (ECM)

How to Fix the DTC P0060 2018 Chevrolet Silverado?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

The code means that there is a problem with the heater element circuit of the heated oxygen sensor. The control module monitors how long it takes the sensor to warm up and start sending an adequate signal. The code is set when the sensor is taking too long to warm up. Water getting inside the heated oxygen sensor connector can cause the heated oxygen sensor fuse to blow. Before replacing the sensor, check for the condition of the heated oxygen sensor fuse and connectors. If the fuse and connector are OK, replacing the O2 Sensor usually takes care of the problem.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0060 2018 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0060 2018 Chevrolet Silverado code?

Need more information on how to fix the P0060 2018 Chevrolet Silverado code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0060 2018 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0060 2018 Chevrolet Silverado Code

1. What is the meaning of OBDII code P0060 on a 2018 Chevrolet Silverado?

- OBDII code P0060 on a 2018 Chevrolet Silverado indicates an issue with the HO2S (Heated Oxygen Sensor) Heater Resistance on Bank 2 Sensor 2.

2. What are common symptoms of OBDII code P0060 on a 2018 Chevrolet Silverado?

- Common symptoms include poor fuel economy, rough idling, engine misfires, and a possible decrease in overall vehicle performance.

3. What are the possible causes of OBDII code P0060 on a 2018 Chevrolet Silverado?

- The code P0060 can be triggered by a faulty HO2S heater, damaged wiring or connectors, a blown fuse, or a problem with the engine control module (ECM).

4. How can I diagnose OBDII code P0060 on my 2018 Chevrolet Silverado?

- Diagnosing the code typically involves checking the wiring and connectors related to Bank 2 Sensor 2, testing the HO2S heater resistance, and inspecting the fuse associated with the sensor.

5. Can I continue driving my 2018 Chevrolet Silverado with OBDII code P0060?

- It is not recommended to drive your vehicle with an unresolved P0060 code as it can lead to potential engine performance issues and may cause further damage over time.

6. How can I repair OBDII code P0060 on my 2018 Chevrolet Silverado?

- Repairing the P0060 code may involve replacing the HO2S sensor, repairing or replacing damaged wiring, ensuring proper connections, and addressing any ECM issues.

7. Is it possible to clear OBDII code P0060 on a 2018 Chevrolet Silverado without fixing the underlying issue?

- Clearing the code without fixing the underlying problem may temporarily turn off the check engine light, but the issue will likely recur, and it's essential to address the root cause.

8. How much does it cost to repair OBDII code P0060 on a 2018 Chevrolet Silverado?

- The cost of repairing the P0060 code can vary depending on the exact cause of the issue, but it may involve parts and labor costs associated with sensor replacement or wiring repairs.

9. Can a DIY enthusiast fix OBDII code P0060 on a 2018 Chevrolet Silverado?

- While diagnosing and repairing the P0060 code may be feasible for experienced DIY enthusiasts, it's recommended to have a professional mechanic handle the repair due to the complexity of the system.

10. Will OBDII code P0060 cause my 2018 Chevrolet Silverado to fail an emissions test?

- Yes, an unresolved P0060 code can cause your 2018 Chevrolet Silverado to fail an emissions test due to the impact on the vehicle's emissions control system.