AutoCodes – Chevrolet – P0060 2017 Chevrolet Silverado

P0060 2017 Chevrolet Silverado Code - HO2S Heater Resistance Bank 2 Sensor 2

Quick Answer

Heated Oxygen Sensors (HO2S) are used for fuel control and post catalyst monitoring. Common causes include Faulty Heated Oxygen Sensor (H2OS) Bank 2 Sensor 2, Heated Oxygen Sensor Bank 2 Sensor 2 harness is open shorted, Heated Oxygen Sensor Bank 2 Sensor 2 circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0060 2017 Chevrolet Silverado indicates HO2S Heater Resistance Bank 2 Sensor 2.
Common causes: Common causes include Faulty Heated Oxygen Sensor (H2OS) Bank 2 Sensor 2, Heated Oxygen Sensor Bank 2 Sensor 2 harness is open shorted, Heated Oxygen Sensor Bank 2 Sensor 2 circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 524

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Mar 25, 2024

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0060 2017 Chevrolet Silverado Description

Heated Oxygen Sensors (HO2S) are used for fuel control and post catalyst monitoring. Each HO2S compares the oxygen content of the surrounding air with the oxygen content in the exhaust stream. The HO2S must reach an operating temperature to provide an accurate voltage signal. A heating element inside the HO2S minimizes the time required for the sensors to reach operating temperature. Voltage is provided to the heater by an ignition voltage circuit through a fuse. With the engine running, the ground is provided to the heater by the HO2S heater low control circuit through a low side driver within the Engine Control Module (ECM). The ECM uses Pulse Width Modulation (PWM) to control the HO2S heater operation to maintain a specific HO2S operating temperature range.
The Diagnostic Trouble Code (DTC) will be set when the ECM detects the HO2S heater is not within a specified resistance range at engine start-up.

OBDII Code P0060 2017 Chevrolet Silverado - HO2S Heater Resistance Bank 2 Sensor 2 - AutoCodes.com — P0060 2017 Chevrolet Silverado Code - HO2S Heater Resistance Bank 2 Sensor 2

What does this mean?

What are the Possible Causes of the DTC P0060 2017 Chevrolet Silverado?

Faulty Heated Oxygen Sensor (H2OS) Bank 2 Sensor 2
Heated Oxygen Sensor Bank 2 Sensor 2 harness is open shorted
Heated Oxygen Sensor Bank 2 Sensor 2 circuit poor electrical connection
Heated Oxygen Sensor Bank 2 Sensor 2 circuit fuse
Faulty Engine Control Module (ECM)

How to Fix the DTC P0060 2017 Chevrolet Silverado?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

The code means that there is a problem with the heater element circuit of the heated oxygen sensor. The control module monitors how long it takes the sensor to warm up and start sending an adequate signal. The code is set when the sensor is taking too long to warm up. Water getting inside the heated oxygen sensor connector can cause the heated oxygen sensor fuse to blow. Before replacing the sensor, check for the condition of the heated oxygen sensor fuse and connectors. If the fuse and connector are OK, replacing the O2 Sensor usually takes care of the problem.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0060 2017 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0060 2017 Chevrolet Silverado code?

Need more information on how to fix the P0060 2017 Chevrolet Silverado code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0060 2017 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0060 2017 Chevrolet Silverado Code

1. What does the OBDII code P0060 mean on a 2017 Chevrolet Silverado?

P0060 indicates an issue with the resistance in the heater circuit of the downstream oxygen sensor (Bank 2, Sensor 2).

2. What are the symptoms of code P0060 in a 2017 Chevrolet Silverado?

Common symptoms include an illuminated check engine light, decreased fuel efficiency, and potential difficulty passing emissions tests.

3. What causes the P0060 code on a 2017 Chevrolet Silverado?

The most common causes are a faulty oxygen sensor, damaged wiring or connectors in the heater circuit, or an issue with the engine control module (ECM).

4. How can I diagnose the P0060 code on my 2017 Chevrolet Silverado?

Start by inspecting the wiring and connectors around the Bank 2 Sensor 2 oxygen sensor for damage or corrosion. Use a multimeter to check the resistance of the sensorâ€™s heater circuit and compare it to manufacturer specifications.

5. Can I drive my 2017 Chevrolet Silverado with the P0060 code?

While your vehicle may still be drivable, itâ€™s not recommended due to potential reduced fuel efficiency and increased emissions.

6. What is the location of Bank 2 Sensor 2 on a 2017 Chevrolet Silverado?

Bank 2 refers to the side of the engine opposite cylinder 1, and Sensor 2 is the downstream oxygen sensor located after the catalytic converter on that side.

7. How do I fix the P0060 code on a 2017 Chevrolet Silverado?

Repairs may include replacing the faulty oxygen sensor, repairing or replacing damaged wiring, or reprogramming the ECM if necessary.

8. How much does it cost to repair the P0060 code on a 2017 Chevrolet Silverado?

Repair costs vary but typically range from $150 to $300, depending on whether the oxygen sensor needs replacement or if wiring repairs are required.

9. Can a bad oxygen sensor cause the P0060 code on a 2017 Chevrolet Silverado?

Yes, a faulty oxygen sensor with an open or shorted heater circuit is a common cause of the P0060 code.

10. How do I prevent the P0060 code from reoccurring on my 2017 Chevrolet Silverado?

Regular maintenance, including checking for damaged wiring and ensuring oxygen sensors are functioning properly, can help prevent this code from reoccurring.