P0060 2016 Ford F150 Code - HO2S Heater Resistance Bank 2 Sensor 2
Quick Answer
The HO2S detects the presence of oxygen in the exhaust and produces a variable voltage according to the amount of oxygen detected. Common causes include Faulty Heated Oxygen Sensor Bank 2 Sensor 2 (HO2S22), Heated Oxygen Sensor Bank 2 Sensor 2 circuit open shorted to ground, Heated Oxygen Sensor Bank 2 Sensor 2 circuit poor electrical connection. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
- What it means
- P0060 2016 Ford F150 indicates HO2S Heater Resistance Bank 2 Sensor 2.
- Common causes
- Common causes include Faulty Heated Oxygen Sensor Bank 2 Sensor 2 (HO2S22), Heated Oxygen Sensor Bank 2 Sensor 2 circuit open shorted to ground, Heated Oxygen Sensor Bank 2 Sensor 2 circuit poor electrical connection.
- Severity
- Moderate - service should be scheduled soon.
- Can I drive?
- The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
Code P0060 2016 Ford F150 Description
When the oxygen sensor is cold, disconnected, or on initial start-up, the voltage may read between 1.5 to 1.7 volts. The oxygen sensor voltage will decrease to the normal operating range of 0.0 to 1.1 volts during warm, stabilized engine running conditions.
The HO2S heater is embedded with a sensing element. The heating element heats the sensor to a temperature of 800°C (1,472°F). At approximately 300°C (572°F) the engine enters closed loop operation. The heater allows the engine to enter closed loop operation sooner.
This Diagnostic Trouble Code (DTC) sets when the heater current requirements are too low or too high in the Heated Oxygen Sensor Bank 2 Sensor 2 (HO2S22) circuit.
What are the Possible Causes of the DTC P0060 2016 Ford F150?
- Faulty Heated Oxygen Sensor Bank 2 Sensor 2 (HO2S22)
- Heated Oxygen Sensor Bank 2 Sensor 2 circuit open shorted to ground
- Heated Oxygen Sensor Bank 2 Sensor 2 circuit poor electrical connection
How to Fix the DTC P0060 2016 Ford F150?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0060 2016 Ford F150 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0060 2016 Ford F150 code?
Need more information on how to fix the P0060 2016 Ford F150 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0060 2016 Ford F150 code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0060 2016 Ford F150 Code
1. What does OBDII code P0060 indicate on a 2016 Ford F150?
The P0060 code on a 2016 Ford F150 refers to an issue with the HO2S (Heated Oxygen Sensor) Heater Resistance for Bank 2 Sensor 2.
2. What are the common symptoms of OBDII code P0060 on a 2016 Ford F150?
Common symptoms of code P0060 may include the Check Engine light illuminating on the dashboard, poor fuel economy, rough idling, and potential engine misfires.
3. What are the possible causes of OBDII code P0060 on a 2016 Ford F150?
Common causes of code P0060 include a faulty HO2S sensor, damaged wiring or connectors, a blown fuse, or issues with the vehicle's ECM (Engine Control Module).
4. How can I diagnose OBDII code P0060 on my 2016 Ford F150?
Diagnosing code P0060 involves using an OBDII scanner to retrieve the code and inspecting the HO2S sensor, wiring, and connectors for any visible damage or issues.
5. Can I continue driving my 2016 Ford F150 with OBDII code P0060?
It is not recommended to drive your vehicle with an unresolved P0060 code as it can lead to further damage and potentially affect the engine's performance.
6. How can I repair OBDII code P0060 on a 2016 Ford F150?
Repairing code P0060 may involve replacing the faulty HO2S sensor, repairing damaged wiring or connectors, checking and replacing any blown fuses, or resetting the ECM.
7. Are there any DIY tips for fixing OBDII code P0060 on a 2016 Ford F150?
While some basic inspections and fuse checks can be done by DIY enthusiasts, diagnosing and repairing code P0060 may require professional expertise and specialized tools.
8. Will resetting the OBDII code P0060 on a 2016 Ford F150 make it go away permanently?
Resetting the code may temporarily turn off the Check Engine light, but if the underlying issue causing P0060 is not resolved, the code is likely to reappear.
9. How much does it typically cost to repair OBDII code P0060 on a 2016 Ford F150 at a mechanic?
The cost of repairing code P0060 can vary depending on the exact cause of the issue, but it may range from a few hundred to over a thousand dollars, including parts and labor.
10. Is it important to address OBDII code P0060 promptly on a 2016 Ford F150?
Yes, it is important to address code P0060 promptly to ensure optimal engine performance, fuel efficiency, and to prevent potential damage to other components of your 2016 Ford F150.
Discuss the causes and fixes for P0060 2016 Ford F150 OBDII Code
Code P0060 2016 Ford F150 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
